• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.132-132
• /
• 2010

In a previous report, we demonstrated that poly (3,4-ethylenedioxythiophene) derived from poly (ionic liquid) (PEDOT:PIL) constitutes a polymeric hole-injecting material capable of improving device lifetime in organic light-emitting diodes (OLEDs).was attributed to aprotection characteristic of PEDOT:PIL for the indium extraction from ITO electrodes, which frequently occurrs in the OLED device with the conventional PEDOT materials. In this study, we report the OLED device lifetime as well asvice efficiencycan be further improved with the modified PEDOT:PIL in whichorganic compounds are incorporated. The deviced performance will be presented in terms of device lifetime and efficiencies.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.642-646
• /
• 2009

Highly efficient white phosphorescent organic light-emitting diodes with a mixed-host structure are developed and the device characteristics are studied. The introduction of a hole-transport-type host (N, N'-dicarbazolyl-3-3-benzen (mCP)) into an electron-transport-type host (m-bis-(triphenylsilyl)benzene (UGH3)) as a mixed-host emissive layer effectively achieves higher current density and lower driving voltage. The peak external quantum and power efficiency with the mixed-host structure improve up to 18.9% and 40.9 lm/W, respectively. Moreover, this mixed-host structure device shows over 30% enhanced performance compared with a single-host structure device at a luminance of 10,000 $cd/m^2$ without any change in the electroluminescence spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.492-493
• /
• 2007

We have investigated Electrical Properties of Organic Light-Emitting Diode depending on Varied Temperature using 8-hydroxyquinoline aluminum($Alq_3$) as an electron transport and emissive material. We analyzed the electrical properties of organic light emitting diodes by impedance characteristics of ITO/$Alq_3$/Al. Impedance characteristics was measured complex impedance Z and phase e in the frequency range of 40 Hz to $10^7\;Hz$. From these analyses, we are able to interpret electrical Properties of OLED depending on temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.265-268
• /
• 2008

Among the efforts to increase the efficiency of organic light-emitting device (OLED), there is a way: doping phosphorescent materials. As a phosphorescent material, complexes of heavy transition metal, platinum, were synthesized. $Cl^-$ ion and phenyl group were used as ancillary ligands with 2-(2-pyridyl)benzimidazole (pbi) as a chromophore. The complexes were analysed by FAB-mass spectrometer and absorption and emission spectra were obtained. A phenyl group was able to shift the emission band of the complex even if it's not a chromorphore.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.555-558
• /
• 2004

The efficiency of electron injection from the cathode is strongly dependent on the thickness of the LiF buffer-layer. We used LiF to electron Injection layer. We compared characteristics of organic light emitting device changing LiF thin film thickness from 1.0 m to 10.0 nm. Experiment result, we found that LiF thickness has the optimized electrical characteristics in 3.0 m. In this paper, we did research about electrical characteristics of organic light emitting device by LiF thickness change using method numerical analysis method. We proved adequate experimental results that compare results of numerical analysis, and come out through an experiment results is validity.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.1
• /
• pp.8-12
• /
• 2005

Indium tin oxide(ITO) surface treated by Oxygen plasma has been in situ analyzed using XPS(X-ray Photoelectron Spectroscopy) and EDS(Energy Dispersive Spectroscopy), to investigate the relations between the properties of the ITO surface and the properties of OLED(Organic Light Emitting Diode). We measured electrical resistivity using Four-Point-Probe and calculated sheet resistance, and ITO surface roughness was measured by AFM(Atomic Force Microscope). We fabricated OLED using substrate that was treated optimum ITO surface. The plasma treatment of the ITO surface lowered the operating voltage of the OLED. We have obtained an improvement of luminance and decrease of turn-on voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.67-68
• /
• 2008

A simple bi-layer structure of organic light emitting diode (OLED) was used to study the characteristics of anode preparation. Indium tin oxide (ITO) anode surface treatment of OLEDs was performed to get the optimum condition for the ITO anode. The ITO surface was treated by $O_2$ or $O_2$ / Ar mixed gas plasma with different processing time. The electrical characteristics of OLED were improved by plasma treatment. The operating voltage of OLED with $O_2$ or $O_2$/Ar mixed gas plasma treated anodes decreases from 8.2 to 3.4 V and 3.2V, respectively. The $O_2$ /Ar mixed gas plasma treatment results in better electrical property.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.638-644
• /
• 2010

We have carry out numerical simulation of the electric-optical characteristics of organic light emitting diodes with gradient-doped emitting layer which were reported to be effective in improving luminous efficiency and lifetime. In this paper, the basic structure is comprised of ITO/NPB/$Alq_3$:C545T[%]/$Alq_3$/LiF/Al, six devices by separating the emitting layer of $Alq_3$:C545T[%] were studied. As the result, the uniformly-doped devices exhibited superior luminous efficiency-current density characteristics over conventional undoped device. In the case of gradient-doped devices, electric-optical characteristics were improved similar to uniformed-doped devices, unusually the distribution of traped-charge density in the OLED devices was shown as the staircase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.177-180
• /
• 2002

The purpose of this thesis is to develope buffer materials by the plasma polymerization method. In this article the buffer materials, plasma poly thiophene(PPTh) is used to study the interface of eter/organic in organic light emitting diodes(OLED). The interface of meter/organic materials is the important and critical objectives in development of OLED. The hole transport layer was N,N'-dipheneyl-N, N'bis-(3-methypheneyl)-1,1'dipheneyl-4,4'-diamine (TPD); the host material of mission layer was 8-tris-hydroxyquinoline aluminium (Alq3). When PPTh was inserted between ITO and TPD, emission efficiency increased.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.511-514
• /
• 2008

2-wavelength type white OLED devices have been made consisted of two layers; a layer with blue light emitting DPVBi host and other EML layer with yellow emitting rubrene dopant. New method to get white emitting device has been suggested by varying thicknesses of the DPVBi layer. The ITO/2-TNATA($150{\AA}$)/NPB($350{\AA}$)/DPVBi($35{\AA}$)/DPVBi:rubrene (2wt%,$200{\AA}$)/DPVBi($100{\AA}$)/Alq_3($50{\AA}$)/LiF($5{\AA}$)/Al($1000{\AA}$) structure has showed optimum results in CIE coordinates of (0.3233, 0.33). OLED devices with this structure has properties of $1.2d/m^2$ at turn-on voltage of 3.9V and $1037cd/m^2$ at 7.9V. This structure has advantages of simple fabrication and easy to emit the white color.