• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.1-8
• /
• 2017

Currently gas safety management in the industrial field has been done by LDAR as contact method or methane leak detector as non-contact method. But LDAR method requires a lot of man-power and methane leak detector have the limitation of methane only. Therefore the Research on the OGI(optical gas image) has big attention by industry. This research was undertaken to see the effect of background temperature difference of gas cloud on the clarity of OGI. The background temperature control panel was constructed to cool down the background temperature. OGI was taken at the various methane gas ejection rate and the designed temperature difference. The experimental results showed that the OGI(when the temperature difference is $-6^{\circ}C$) is more clear thane the OGI(when the temperature difference is zero). To quantify the clarity difference, MATLAB's RGB analysis method was employed. The RGB value of the OGI at ${\Delta}T-6^{\circ}C$ was 20% lower than the OGI at ${\Delta}T0^{\circ}C$. The clarity difference by T difference can be explained by the total radiation law. When the background temperature of the gas is lower than the air temperature, the radiation energy coming into the OGI lens is increasing. As the energy is increasing, the OGI image becomes clear.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.28-39
• /
• 2019

In this paper is image characteristics of main gas can be a basic data for the identification of the type of leaking gas and the estimation of the emission quantity in OGI(Optical Gas Image) technology. The purpose of this research is to observe the differences of leaking gas images of the two important hydrocarbons of methane and propane in the industry. We fabricated a wind shield of quartz-based with infrared-permeable properties was prepared and methane and propane were simultaneous emission and then photographed with an infrared OGI camera and we are analyzed it. We have a stable image with windbreak of quartz-based minimizes the effect of wind. As a result of analyzing the image of two hydrocarbons with a leakage gas reference value of 1 L/min, an easily recognizable distances by OGI camera were 6 m for methane and 9 m for propane. In the distances range of 1 to 10 m between the infrared camera and the leaking gas point, the gas plume size of the propane gas was larger and clear than that of the methane gas plume. Compared with the number of points in the image, propane was 3.8 times more than methane.

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.16-26
• /
• 2017

In chemical industry plants, the raw material, intermediate and final products can leak from unstable joints of flanges and valves as well as cracks of storage tanks. From the safety and economic standpoints, it is very important to understand whether leaks or not and leakage rate. The OGI(optical gas image) technique can tell gas leakages, but cannot give the leakage rate. Some special OGI devices can show the kind of gas in different color concentration in different darkness. Therefore the research on quantification of OGI is necessary. In this research, we have developed the practical method to quantify OGI of methane leakage. To estimate 3-dimensional gas leakages distribution from 2-dimensional OGI, the Monte Carlo Probability technique was applied. First the number of points in the area of width(2.54 cm) and length(2.54 cm) in OGI was counted. Total no of each experiment was compared with the measured flow rate. The correlation average between total points and measured flow rate was found to be 0.980. Reversely we estimated the leakage rate of OGI by use of the correlation table. The results showed good agreement between the estimation value and the measured value.