• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.202-206
• /
• 1985

The crystal structure of The crystal structure of $Ag^+$-Exchanged Zeolite A, $Ag_{4.6}Na_{7.4}-A$, dehydrated, treated with $H_2$, and evacuated, all at $350^{\circ}C$, has been determined by single crystal x-ray diffraction methods in the cubic space group Pm3m at $24(1)^{\circ}C;$ a = $12.208(2)\AA.$ The structure was refined to the final error indices R1 = 0.088 and R2 (weighted) = 0.069 using 194 independent reflections for which II_0$ > $3{\sigma}(I_0)$. On threefold axes near the centers of 6-oxygen rings, $7.4 Na^+$ ions and $0.6 Ag^+$ ions are found. Two non-equivalent 8-ring $Ag^+$ ions are found off the 8-ring planes, each containing about $0.6 Ag^+$ ions. Three non-equivalent Ag atom positions are found in the large cavity, each containing about 0.6 Ag atoms. This crystallographic analysis may be interpreted to indicate that $0.6 (Ag_6)^{3+}$ clusters are present in each large cavity. This cluster may be viewed as a nearly linear trisilver molecule $(Ag_3)^0$ (bond lengths, 2.92 and 2.94 $\AA;$ angle, $153^{\circ})$ stabilized by the coordination of each atom to a Ag^+$ ion at 3.30, 3.33, and 3.43 $\AA$, respectively. In addition, one of the silver atoms approaches all of the 0(1) oxygens of a 4-ring at $2.76\AA.$ Altogether $7.4 Na^+$ ions, $1.8 Ag^+$ ions, and 1.8 Ag atoms are located per unit cell. The remaining $1.0 Ag^+$ ion has been reduced and has migrated out of the zeolite framework to form silver crystallites on the surface of the zeolite single crystal.

• Resources Recycling
• /
• v.30 no.4
• /
• pp.20-26
• /
• 2021

Solar grade silicon (SoG-Si) has been commercially supplied mainly from off-grade high-purity silicon manufactured for electronic-grade Si (EG-Si). Therefore, for wider application of solar cells, the development of a refining process at a considerably lower cost is required. The most cost-effective and direct approach for producing SoG-Si is to purify and upgrade metallurgical-grade Si (MG-Si). In this study, directional solidification of molten MG-Si was conducted in a high-frequency induction furnace to remove iron from molten Si. The experimental conditions and results were also discussed with respect to the effective segregation coefficient, Scheil equation, and Peclet number. The study showed that when the descent velocity of the specimen decreased, the macro segregations of impurities and ingot purities increased. These results were derived from the decrease in the effective segregation coefficient with the decrease in the rate of descent of the specimen.

• Journal of Industrial Convergence
• /
• v.20 no.7
• /
• pp.123-129
• /
• 2022

It was to establish the usage possibility as cosmetic material by testing stimulation of Leuconostoc mesenteroides which were cultured from human scalp's dead skin cell by patching it to the skin in the form of solubilized essence. Cultured L. mesenteroides diluted to 1% concentration and essence which contains it were patched to 31 and 32 participants' back each for 24 hours and established the stimulus figures by the specialists in 30 minutes, 24 hours, and 48 hours after they were taken off. They are both revealed as non-stimuli due to the result of 0.011 and 0 points each and therefore they are safe when used as skin products. Considering the results of this test and the other previous studies which reported the L. mesenteroides as anti-allergic, antioxidant, and anti-inflammatory, L. mesenteroides is usable for cosmetics and worth further research.

• Genomics & Informatics
• /
• v.19 no.4
• /
• pp.47.1-47.12
• /
• 2021

Kaposi's sarcoma-associated herpesvirus (KSHV) is one of the few human oncogenic viruses, which causes a variety of malignancies, including Kaposi's sarcoma, multicentric Castleman disease, and primary effusion lymphoma, particularly in human immunodeficiency virus patients. The currently available treatment options cannot always prevent the invasion and dissemination of this virus. In recent times, siRNA-based therapeutics are gaining prominence over conventional medications as siRNA can be designed to target almost any gene of interest. The ORF57 is a crucial regulatory protein for lytic gene expression of KSHV. Disruption of this gene translation will inevitably inhibit the replication of the virus in the host cell. Therefore, the ORF57 of KSHV could be a potential target for designing siRNA-based therapeutics. Considering both sequence preferences and target site accessibility, several online tools (i-SCORE Designer, Sfold web server) had been utilized to predict the siRNA guide strand against the ORF57. Subsequently, off-target filtration (BLAST), conservancy test (fuzznuc), and thermodynamics analysis (RNAcofold, RNAalifold, and RNA Structure web server) were also performed to select the most suitable siRNA sequences. Finally, two siRNAs were identified that passed all of the filtration phases and fulfilled the thermodynamic criteria. We hope that the siRNAs predicted in this study would be helpful for the development of new effective therapeutics against KSHV.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.3
• /
• pp.259-268
• /
• 2022

Molten salt consisting primarily of eutectic LiCl-KCl is currently being used in electrorefiners in the Fuel Conditioning Facility at Idaho National Laboratory. Options are currently being evaluated for storing this salt outside of the argon atmosphere hot cell. The hygroscopic nature of eutectic LiCl-KCl makes is susceptible to deliquescence in air followed by extreme corrosion of metallic cannisters. In this study, the effect of occluding the salt into a zeolite on water sorption/desorption was tested. Two zeolites were investigated: Na-Y and zeolite 4A. Na-Y was ineffective at occluding a high percentage of the salt at either 10 or 20wt% loading. Zeolite-4A was effective at occluding the salt with high efficiency at both loading levels. Weight gain in salt occluded zeolite-4A (SOZ) from water sorption at 20% relative humidity and 40℃ was 17wt% for 10% SOZ and 10wt% for 20% SOZ. In both cases, neither deliquescence nor corrosion occurred over a period of 31 days. After hydration, most of the water could be driven off by heating the hydrated salt occluded zeolite to 530℃. However, some HCl forms during dehydration due to salt hydrolysis. Over a wide range of temperatures (320-700℃) and ramp rates (5, 10, and 20℃ min^-1), HCl formation was no more than 0.6% of the Cl^- in the original salt.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.107-115
• /
• 2009

The cryptological key which is used in WiMAX environment is used at regular intervals by mobile nodes (laptop computer, PDA, cell-phone) which is in the range of base station coverage. But it is very weak at local attack like man-in-the-middle when the mobile node is off the range of base station or enters into the range to communicate with base station because the communication section is activated wirelessly. This paper proposes a distribution key building protocol which can reuse security key used by nodes to reduce cryptological security attack danger and communication overhead which occurs when mobile node tries to communicate with base station. The proposed distribution key establishing protocol can reduce overhead which occurs between base station and mobile node through key reusing which occurs during the communication process and also, makes security better than IEEE 802.16 standard by creating shared key which is required for inter-certification through the random number which node itself creates.

• Korean Journal of Materials Research
• /
• v.32 no.2
• /
• pp.66-71
• /
• 2022

In this article, Pb₂Ba_1.7Sr_0.3Ca₂Cu₃O_10+δ superconductor material was synthesized using conventional solid-state reaction method. X-ray diffraction (XRD) analysis demonstrated one dominant phase 2223 and some impurities in the product powder. The strongest peaks in the XRD pattern were successfully indexed assuming a pseudo-tetragonal cell with lattice constants of a = 3.732, b = 3.733 and c = 14.75 Å for a Pb-Based compound. The crystallite size and lattice strain between the layers of the studied compound were estimated using several methods, namely the Scherrer, Williamson-Hall (W.H), size-strain plot (SSP) and Halder Wagner (H.W) approach. The values of crystallite size, calculated by Scherrer, W.H, SSP and H.W methods, were 89.4540774, 86.658638, 87.7555823 and 85.470086 Å, respectively. Moreover, the lattice strain values obtained by W.H, SSP and H.W methods were 0.0063240, 0.006325 and 0.006, respectively. It was noted that all crystallite size results are consistent; however, the best method is the size-strain plot because it gave a value of R² approaching one. Furthermore, degree of crystallites was calculated and found to be 59.003321%. Resistivity analysis suggests zero-resistance, which is typical of superconducting materials at critical temperature. Four-probe technique was utilized to measure the critical temperature at onset T_c(onset), zero resistivity T_{c(off set)}, and transition (width ΔT), corresponding to temperatures of 128 K, 116 K, and 12 K, respectively.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.101-107
• /
• 2022

Tertomotide is a peptide vaccine developed for anti-cancer therapy. Since it has been found to ameliorate inflammatory symptoms in animal studies and clinical test, we investigated anti-inflammation activity of the tertomotide and the mechanism of action in monocyte in order to assess if tertomotide may serve as an anti-inflammatory agent by checking inflammatory cytokines and related signaling pathway following tertomotide treatment. We found that tertomotide reduced the level of pro-inflammatory cytokines such as TNF-α, IL-1β, IL-8 in LPS- or PMA-stimulated monocyte cell line and suppressed NF-κB signaling including the activation of ERK1/2 and P38 MAPK following TNF-α treatment. These results may correlate to the beneficial findings in animal studies, implicating that tertomotide may act as a potential anti-inflammatory agent. This study is an exemplary case for convergence that a computationally designed peptide for immunological purpose exerting unexpected biological activity may elicit novel anti-inflammatory drug.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.459-461
• /
• 2022

One of the big differences between Network-on-Chip (NoC) and the existing parallel processing system based on an off-chip network is that data packet routing is performed using a centralized control scheme. In such an environment, the best-effort packet routing problem becomes a real-time assignment problem in which data packet arriving time and processing time is the cost. In this paper, the Hungarian algorithm, a representative computational complexity reduction algorithm for the linear algebraic equation of the allocation problem, is implemented in the form of a hardware accelerator. As a result of logic synthesis using the TSMC 0.18um standard cell library, the area of the circuit designed through case analysis for the cost distribution is reduced by about 16% and the propagation delay of it is reduced by about 52%, compared to the circuit implementing the original operation sequence of the Hungarian algorithm.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.447-456
• /
• 2023

In this work, we performed a comparative study examining two coatings on Ti Gr.1 for use in fuel cell bipolar plates. The coatings consisted of carbon black as the conductor along with acrylic polymer and Ti Sol-Gel binder as the binder. Ti Sol-Gel that had precipitated as TiO₂ in areas impregnated between carbon black gaps, thereby acting as a binder for carbon black and serving as a polymer coating. Neither of the coatings peeled off during the 90° bend test to check formability. The contact resistance of the TiO₂ coating was found to be lower than that of the polymer binder coating. Moreover, due to coating shrinkage (denser) that occurred during the heat treatment process, the TiO₂ binder coating showed almost the same level of corrosion resistance, as measured by potentiostatic and EIS tests, despite being thinner than the polymer coating. However, both the polymer binder coating and the TiO₂ binder coating had many pores and irregularities internally (around 10 ~ 100 nm) and on the surface (0.1 ~ 2 ㎛). We considered that these pores and irregularities contributed to the lower corrosion resistance.