• 대한의용생체공학회:의공학회지
• /
• 제34권2호
• /
• pp.73-79
• /
• 2013

Purpose: The purposes of this study were to measure the dose distribution of Photodynamic therapy(PDT) laser with 635 nm wavelength using GafChromic film. Method & Result: We made each output 300 J by changing mW and sec using the laser beam radiation mode such as C.W(Continuous Wave) mode, Pulse mode and Burst Pulse mode and measured the does at 0 mm and 5 mm of distance from optic fiber catheter end to the film, and at 5 mm distance by changing the angle of the end of the optic fiber catheter as $0^{\circ}$ and $0.5^{\circ}$. The radiated film was scanned and OD(Optical Density) was compared. And two-dimensional isodose curves were obtained and the consistency of shapes was compared. It was confirmed that there was consistency between optic density and the dose radiated on the film when we radiated GafChromic film by changing distance and angle of 300 J output in each radiation mode coordinating mW and sec. Conclusion: In this study, we could identify the stability according to changes in laser beam modes, changes in output according to distance, changes in uniformity according to angle, and beam profiles using GafChromic film, and we could also get two-dimensional isodose curve. It was found that small change in the distance and angle that is made when optic fiber catheter was contacted on the treatment area did not make big effects on the output of beam and the uniformity of dose, and it was also found that GafChromic film could be utilized for the purpose of QA of PDT laser beam.

• 수산해양기술연구
• /
• 제24권4호
• /
• pp.144-149
• /
• 1988

광에 대한 어류의 행동을 조사하기 위하여 까치복 Fugu xanthopterus에 광의 세기가 서로 다른 8가지 백색인공광원으로 광자극을 주어, 그에 대한 반응을 주간과 야간으로 구분 조사한 결과는 다음과 같다. 1. 광자극에 대한 수조내의 구간별분포는 광원쪽구간에 많이 모여 분포곡선은 대체로 L자형이 되었으나, 광의 세기에 따라 그 형태가 다소 차이가 있었으며 주야간의 차이는 뚜렷하지 않았다. 2. 수중조도가 높아짐에 따라 광원쪽에서 더 많이 모이는 경향을 나타냈으며 주간보다 야간에 다소 많이 모였다. 3. 집어율이 최대가 되는 수중조도(적정조도)는 298.56 lux(188.44~444.96 lux)로써 주야간에 같았으며, 최대집어율은 주간에 47.30%, 야간에 50.43%로써 야간에 더 높았다. 4. 조명시간이 경과함에 따라 집어율은 증가하거나 증가한 후 감소하는 경향을 보였으나, 계속 불안정하게 변동했으며 주야간의 차이는 뚜렷하지 않았다.

• Advances in pediatric surgery
• /
• 제8권1호
• /
• pp.28-32
• /
• 2002

Meckel's diverticulum (MD) occurs in approximately 2 % of the population. The major complications of MD are bleeding, intestinal obstruction, infection and perforation. Perforation is the least common but most serious complication, the incidence od which is about 5-10 %. The causes of perforation are inflammatory diverticulitis and peptie ulceration. the purpose of study is to review the characteristics of perforated MD in children. Six patients with perforated MD who had been operated upon at the Department of Pediatric Surgery, Yeungnam University Hospital from April 1984 to July 2001 were included. Male predominated in a ratio of 5:1 and there were 2 neonates. The chief complaints were abdominal pain and distension. Half of the children showed a past history of bloody stools. The average age was 4 year and 9 months. The mean distance from the ileocecal valve to the diverticulum was 60 cm. Average length of the diverticulum was approximately 3 cm and width was 1.7 cm. The perforation site was the tip of the diverticulum in 3 cases, the base in 2 cases and along the lateral border in one. In two patients, ectopic gastric mucosa was found in the specimen. All of the patients were operated upon with a diagnosis of peritonitis of unknown etiology. In conclusion, when a child shows symptoms of acute abdomen or peritonitis, especially in boys, with the history of bloody stools and episodic abdominal pain, perforated MD should be suspected.

• 한국농공학회지
• /
• 제24권4호
• /
• pp.92-98
• /
• 1982

The major objective of this study was to investigate the heat resistance of epoxy resin mortar. For this purpose, these tests of compressive and bending strength were accomp- olished with various heating temperature (40˚C, 60˚C, 80˚C, 100˚C, 120˚C), and with various mixing ratio (1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1:12, 1:14). The exprimental resin was to be Epi-Bis type epoxy resin, which is widely used as construction materials. The results obtained are summarized as follows; 1. The variations of color tone started to begin at 60˚C, and it has come out very heavy at 120˚C. It was assumed that the decrement of weight resulted from carbonization were about 0.22% at 100˚C, and about 0.34% at 120˚C. 2. The compressive and bending strength were increased with temperature rise up to 80˚C, but these were made rapid decrease when the given temperature was over. And so, the mean decrement of compressive and bending strength at 120˚C reached up to 35.5% and 26.4%, respectively. 3. The regression equation between compressive and bending strength for epoxy resin mortar under heat exposure were obtained as follows; od=0. 371oc+39. 23 (r=0. 986) And the estimated value of bending strength was corresponded to about 37 percent in comparing with that of the compressive strength. 4. Consquently, the heat resistance temperature of epoxy resin mortar was to be around 80˚C, and it was generally very low values. But it was regarded that the epoxy resin mortar will not be difficult with materials of civil engineering works and agricultural structures.

• Journal of Microbiology and Biotechnology
• /
• 제24권7호
• /
• pp.959-968
• /
• 2014

The changes in the ${\beta}$-glucosidase activity, total phenolic contents, isoflavone contents, and antioxidant activities during the fermentation of cheonggukjang by Bacillus amyloliquefaciens MJ1-4 with and without garlic were investigated. The levels of total phenolic and isoflavone-malonylglycoside, -acetylglycoside, and -aglycone contents increased, whereas the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging activities and ferric reducing/antioxidant power (FRAP) assay results increased, but isoflavone-glycoside levels decreased during cheonggukjang fermentation. The levels of total phenolic and total isoflavone contents and the antioxidant activities were higher in cheonggukjang fermented without garlic (CFWOG) than in cheonggukjang fermented with garlic (CFWG) after 24 h of fermentation, but they were lower in CFWOG than in CFWG after 72 h of fermentation. In particular, the highest levels of total phenolic, daidzein, glycitein, and genistein were present at concentrations of 15.18 mg/g, $264.4{\mu}g/g$, $16.4{\mu}g/g$, and $31.1{\mu}g/g$ after 72 h of fermentation in CFWG, showing 82.89% in DPPH radical scavenging activity, 106.32% in ABTS radical scavenging activity, and 1.47 ($OD_{593nm}$) in FRAP assay, respectively. From these results, we suggest that the high antioxidant activity of CFWG might be related to the markedly higher levels of total phenolic contents, isoflavone-malonylglycosides, -acetylglycosides, and -aglycones achieved during fermentation.

• Fisheries and Aquatic Sciences
• /
• 제19권6호
• /
• pp.28.1-28.7
• /
• 2016

Background: Significant increases in the bacterial resistance to various antibiotics have been found in fish farms. Non-antibiotic therapies for infectious diseases in aquaculture are needed. In recent years, light-emitting diode technology has been applied to the inactivation of pathogens, especially those affecting humans. The purpose of this study was to assess the effect of blue light (wavelengths 405 and 465 nm) on seven major bacterial pathogens that affect fish and shellfish important in aquaculture. Results: We successfully demonstrate inactivation activity of a 405/465-nm LED on selected bacterial pathogens. Although some bacteria were not fully inactivated by the 465-nm light, the 405-nm light had a bactericidal effect against all seven pathogens, indicating that blue light can be effective without the addition of a photosensitizer. Photobacterium damselae, Vibrio anguillarum, and Edwardsiella tarda were the most susceptible to the 405-nm light (36.1, 41.2, and $68.4J\;cm^{-2}$, respectively, produced one log reduction in the bacterial populations), whereas Streptococcus parauberis was the least susceptible ($153.8J\;cm^{-2}$ per one log reduction). In general, optical density (OD) values indicated that higher bacterial densities were associated with lower inactivating efficacy, with the exception of P. damselae and Vibrio harveyi. In conclusion, growth of the bacterial fish and shellfish pathogens evaluated in this study was inactivated by exposure to either the 405- or 465-nm light. In addition, inactivation was dependent on exposure time. Conclusions: This study presents that blue LED has potentially alternative therapy for treating fish and shellfish bacterial pathogens. It has great advantages in aspect of eco-friendly treating methods differed from antimicrobial methods.

• Restorative Dentistry and Endodontics
• /
• 제38권2호
• /
• pp.65-72
• /
• 2013

Objectives: To evaluate the inhibitory effect of ursolic acid (UA)-containing composites on Streptococcus mutans (S. mutans) biofilm. Materials and Methods: Composite resins with five different concentrations (0.04, 0.1, 0.2, 0.5, and 1.0 wt%) of UA (U6753, Sigma Aldrich) were prepared, and their flexural strengths were measured according to ISO 4049. To evaluate the effect of carbohydrate source on biofilm formation, either glucose or sucrose was used as a nutrient source, and to investigate the effect of saliva treatment, the specimen were treated with either unstimulated whole saliva or phosphate-buffered saline (PBS). For biofilm assay, composite disks were transferred to S. mutans suspension and incubated for 24 hr. Afterwards, the specimens were rinsed with PBS and sonicated. The colony forming units (CFU) of the disrupted biofilm cultures were enumerated. For growth inhibition test, the composites were placed on a polystyrene well cluster, and S. mutans suspension was inoculated. The optical density at 600 nm ($OD_{600}$) was recorded by Infinite F200 pro apparatus (TECAN). One-way ANOVA and two-way ANOVA followed by Bonferroni correction were used for the data analyses. Results: The flexural strength values did not show significant difference at any concentration (p > 0.01). In biofilm assay, the CFU score decreased as the concentration of UA increased. The influence of saliva pretreatment was conflicting. The sucrose groups exhibited higher CFU score than glucose group (p < 0.05). In bacterial growth inhibition test, all experimental groups containing UA resulted in complete inhibition. Conclusions: Within the limitations of the experiments, UA included in the composite showed inhibitory effect on S. mutans biofilm formation and growth.

• 통합자연과학논문집
• /
• 제4권2호
• /
• pp.113-120
• /
• 2011

Brassinosteroids (BRs) are plant steroid hormones that play essential roles in growth and development. Mutations in BR-signaling pathways cause defective in growth and development like dwarfism, male sterility, abnormal vascular development and photomorphogenesis. Transition from vegetative to reproductive growth is a critical phase change in the development of a flowering plant. In a screen of activation-tagged Arabidopsis, we identified a mutant named abz126 that displayed longer hypocotyls when grown in the dark on MS media containing brassinazole (Brz), an inhibitor of BRs biosynthesis. We have cloned the mutant locus using adapter ligation PCR walking and identified that a single T-DNA had been integrated into the ninth exon of the GIGANTEA (GI) gene, involved in controling flowering time. This insertion resulted in loss-of-function of the GI gene and caused the following phenotypes: long petioles, tall plant height, many rosette leaves and late flowering. RT-PCR assays on abz126 mutant showed that the T-DNA insertion in GIGANTEA led to the loss of mRNA expression of the GI gene. In the hormone dose response assay, abz126 mutant showed: 1) an insensitivity to paclobutrazole (PAC), 2) an altered response with 6-benzylaminopurine (BAP) and 3) insensitive to Brassinolide (BL). Based on these results, we propose that the late flowering and tall phenotypes displayed by the abz126 mutant are caused by a loss-of-function of the GI gene associated with brassinosteroid hormone signaling.

• 한국인터넷방송통신학회논문지
• /
• 제13권5호
• /
• pp.77-83
• /
• 2013

현재, 조명제어와 관리기술의 한계점은 유선으로 인한 시설비 과다, 운영의 어려움, 에너지낭비이다. 이를 해결하기 위해 조명기기에 무선네트워크 기능이 탑재된 스마트 조명 정보 시스템을 복합적으로 수행하기위한 통신 및 관리 소프트웨어가 필요하다. 본 논문에서는 LED조명의 전력량 모니터링을 통해 에너지 절감을 위한 기술을 개발하고, 이 기술을 융합하기 위해 전력 에너지 정보시스템 LEIS(Lighting Energy Information System)을 개발 했다. LEIS는 센서에 의해 지그비 메쉬망을 통해 수집된 전력 데이터를 모니터링하고 제어하는 시스템으로 조명의 사용에너지 정보를 사용자에게 시각화하여 보여준다. 이 시스템은 LEM(Lighting Energy Metering)의 정보를 바탕으로 한 전력정보 데이터베이스 및 LEIS 웹어플리케이션으로 구성되고 LEIS를 통해 에너지를 최적화하여 제어할 수 있는 시나리오 기능을 제공한다.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1293-1302
• /
• 2003

Rate constants at various temperatures and activation parameters are reported for solvolyses of acyl chlorides (RCOCl), with R = Me, Et, i-Pr, t-Bu, cyclopentylmethyl, benzyl, thiophenylmethyl, 2-phenylethyl, diphenylmethyl, and phenylthiomethyl in 100% ethanol, 100% 2,2,2-trifluoroethanol (TFE), 80% v/v ethanol/ water and 97% w/w TFE/water. Additional rate constants for solvolyses with R = Me, t-Bu, and $PhCH_2$ are reported for TFE/water and TFE/ethanol mixtures, and for solvolyses with R = t-Bu, and PhCH2 are reported for 1,1,1,3,3,3-hexafluoropropan-2-ol/water mixtures, as well as selected kinetic solvent isotope effects (MeOH/MeOD and TFE). Taft plots show that electron withdrawing groups (EWG) decrease reactivity significantly in TFE, but increase reactivity slightly in ethanol. Correlation of solvent effects using the extended Grunwald-Winstein (GW) equation shows an increasing sensitivity to solvent nucleophilicity for EWG. The effect of solvent stoichiometry in assumed third order reactions is evaluated for TFE/ethanol mixtures, which do not fit well in GW plots for R = Me, and t-Bu, and it is proposed that one molecule of TFE may have a specific role as electrophile; in contrast, reactions of substrates containing an EWG can be explained by third order reactions in which one molecule of solvent (ethanol or TFE) acts as a nucleophile, and a molecule of ethanol acts as a general base catalyst. Isokinetic relationships are also investigated.