• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.315-325
• /
• 2019

The purpose of this study is to design and construct a data mart that anyone can easily analyze subway OD movement patterns. Subway OD data of the year 2017 was downloaded from the Seoul Open Data Plaza and used as the source data. A multidimensional model was designed, and Gaussian mixed cluster analysis and visualization analysis using Tableau were performed. Interestingly, movement between suburban and Seoul accounts for 23% of the total traffic. The passengers of Suwon Station move to the suburbs much more than Seoul, while Pangyo Station mostly moves to Seoul. As a result of Gaussian mixed cluster, eight clusters of OD segments were found, and the characteristics of each cluster were characterized by segment distance and passenger size.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.219-232
• /
• 2023

Mobility services need to change according to the regional characteristics of the target service area. Accordingly, analysis of mobility patterns and characteristics based on Origin-Destination (OD) data that reflect travel behaviors in the target service area is required. However, since conventional methods construct the OD data obtained from the administrative district-based zone system, it is hard to ensure spatial homogeneity. Hence, there are limitations in analyzing the inherent travel patterns of each mobility service, particularly for new mobility service like Demand Responsive Transit (DRT). Unlike the conventional approach, this study applies a data-driven clustering technique to conduct spatial analyses on OD travel patterns of regional mobility services based on reconstructed OD data derived from re-aggregation for original OD distributions. Based on the reconstructed OD data that contains information on the inherent feature vectors of the original OD data, the proposed method enables analysis of the spatial characteristics of regional mobility services, including public transit bus, taxi and DRT.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.125-136
• /
• 2005

The goal of this paper is to develop freeway Origin-Destination (OD) demand estimation model using VDS and AVI data. The formulation of methodology proposed in this paper includes traffic flow technique to be able to remove the bi-level problem and optimal solution algorithm using a kalman filter algorithm. The proposed dynamic OD estimation model use ilk and off-ramp volumes collected from VDS and partial OD collected from AVI data to raise the accuracy of dynamic OD estimation. The proposed model is evaluated by using the real-time data of SOHAEAN freeway, South Korea. The result of the proposed dynamic OD estimation model based on VDS and AVI data is better than that of based on VDS data. The more AVI systems are equipped at on and off-ramp, the more excellent result of estimation accuracy is expected.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.80-93
• /
• 2018

Public transit services are generally analyzed based on the correlation of demand and supply. The computation of supply uses accessibility while demand uses travel demands estimation based on residential population. However, the traditional demand estimation has a limitation in analysing in micro-scale compared to the smartcard data traffic. This study analyzed potential improvement of public transit services using smartcard traffic data. The supply of transportation was defined using time distance accessibility. Also, time loss was calculated in those origin destination(OD) pairs where time distance accessibilities are relatively low. The proposed method was applied at Seoul. The results showed that the areas where OD pairs need improvement include Seodaemun-gu, Guro-gu and Nowon-gu.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.135-145
• /
• 2008

As a fundamental input to the travel demand forecasting, OD has been always a concern in obtaining the accurate link traffic volume. Numerous methods were applied thus far without a complete success. Some existing OD estimation techniques generally extract regular samples and expand those sample into population. These methods, however, leaves some to be desired in terms of accuracy. To complement such problems, research on estimating OD using additional information such as link traffic volume as well as sample link use rate have been accomplished. In this paper, a new approach for estimating static origin-destination (OD) using probe vehicle has been proposed. More specifically, this paper tried to search an effective sample rate which varies over time and space. In a sample test network study, the traffic volume error rate of each link was set as objective function in solving the problem. As a key result the MAE (mean absolute error) between expanded OD and actual OD was identified as about 5.28%. The developed methodology could be applied with similar cases. Some limitations and future research agenda have also been discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.53-66
• /
• 2005

Microscopic simulation models, which focus on individual vehicles, are used extensively in the transportation operations in order to capture vehicle to vehicle and vehicle to traffic controls. There are many important factors involved when a micro simulation model is applied as an evaluation tool for the traffic system. They typically include test bed, software, simulation time period, measure of effectiveness, parameter for a software, OD matrix, and random seed number. To evaluate the effects of those factors, sensitivity analysis was performed to identify the effects of those factors based on CORSIM and TRANSIMS results. Three freeway corridors, two in Houston (I-10 and US 290) and one in Sin Antonio (I-37), were chosen as test beds. Three time periods (AM, PM, off-peak) and three OD matrix estimates were used for the analysis. It was found that the micro-simulation results were highly sensitive to the model Parameter sets and the OD information. The degree of sensitivity was a function of the test bed and time period.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.459-465
• /
• 2002

This study was performed to identify the proper analytical conditions of endotoxins regarding optical density in the workplace where metalworking fluids are used. This study found that "onset time method" was more accurate than "time to $V_{max}$ method". Reproducibility and accuracy analyzed by "onset time method" was greatly higher than the "time to $V_{max}$". The optical density of "0.03" was the most appropriate analytical condition among "onset time method". In this analytical condition, linearity of 0.998 was obtained and recovery rate ranged from 88% to 105% at the endotoxin concentrations below 5 EU/mL. No significant difference of endotoxins was observed between the optical densities of "0.03" and "0.05". However, correlation coefficients were different with statistical significance (p<0.01). This study confirmed that either the optical densities "0.03" or "0.05" should be used to analyze endotoxin. Of these optical density values, OD with correlation coefficient higher than 0.98 should be used to analyze endotoxin in environmental samples.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.100-111
• /
• 2019

The existing selected station analysis (SSA) method analyzes the link transfer mode data between origin and destination of individuals passing through stations from a microscopic standpoint. As such, existing SSA is insufficient as it uses integrated analysis using macroscopic data such as subway lines. This research builds a line chain OD based on path search of individual passenger's movement through the subway, and explores means to utilize the findings. First, a method is proposed that searches the traversed subway path from the linked passage modes that the passenger uses and applies the results to SSA line analysis. Compared to the existing SSA, this method provides for analysis of commonly conflicting features such as the line on which the station is passed, and the stations included on the line thanks to the presence of complete information of the individual passenger's traversed path. It also allows for integrated observation of the line chain OD that approaches a certain station. For enhanced understanding, Seoul Metro Line 9 is used as a case study to demonstrate the integrated formulation concept of line chain OD centered around a certain station as well as the macroscopic features of the traversed path that approaches stations included on the line.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.83-93
• /
• 2002

To improve the performance of estimation, the research that uses additional information addition to traffic count and target OD with additional survey cost have been studied. The purpose of this paper is to improve the performance of OD estimation by reducing the feasible solutions with cost-efficiently additional information addition to traffic counts and target OD. For this purpose, we Propose the OD estimation method with sample link use proportion as additional information. That is, we obtain the relationship between OD trip and link flow from sample link use proportion that is high reliable information with roadside survey, not from the traffic assignment of target OD. Therefore, this paper proposes OD estimation algorithm in which the conservation of link flow rule under the path-based non-equilibrium traffic assignment concept. Numerical result with test network shows that it is possible to improve the performance of OD estimation where the precision of additional data is low, since sample link use Proportion represented the information showing the relationship between OD trip and link flow. And this method shows the robust performance of estimation where traffic count or OD trip be changed, since this method did not largely affected by the error of target OD and the one of traffic count. In addition to, we also propose that we must set the level of data precision by considering the level of other information precision, because "precision problem between information" is generated when we use additional information like sample link use proportion etc. And we Propose that the method using traffic count as basic information must obtain the link flow to certain level in order to high the applicability of additional information. Finally, we propose that additional information on link have a optimal counting location problem. Expecially by Precision of information side it is possible that optimal survey location problem of sample link use proportion have a much impact on the performance of OD estimation rather than optimal counting location problem of link flow.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.89-99
• /
• 2000

To cope with the limits of conventional O-D trip matrix collecting methods, several approaches have been developed. One of them is bilevel Programming method Proposed by Yang(1995), which uses Sensitivity Analysis Based(SAB) algorithm to solve Generalized Least Square(GLS) problem. However, the SAB a1gorithm has revealed two critical short-comings. The first is that when there exists a significant difference between target O-D matrix and true O-D matrix, SAB algorithm may not produce correct solution. This stems from the heavy dependance on the historical O-D information, in special when gravel Patterns are dramatically changed. The second is the assumption of iterative linear approximation to original Problem. Because of the approximation, SAB algorithm has difficulty in converging to Perfect Stackelberg game condition. So as to avoid the Problems. we need a more robust and stable solution method. The main purpose of this Paper is to show the problem of the dependency of Previous models and to Propose an alternative solution method to handle it. The Problem of O-D matrix estimation is intrinsically nonlinear and nonconvex. thus it has multiple solutions. Therefore it is necessary to require a method for searching globa1 solution. In this paper, we develop a solution algorithm combined with genetic algorithm(GA) , which is widely used as probabilistic global searching method To compare the efficiency of the algorithm, SAB algorithm suggested by Yang et al. (1992,1995) is used. From the results of numerical example, the Proposed algorithm is superior to SAB algorithm irrespective of travel patterns.