• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.77-82
• /
• 2011

The changes in the wet pressing response of old corrugated container(OCC) stock depending on the beating treatment and the addition of polymer aids were investigated with laboratory roll press instrument. Two types of polymer aids, such as high molecular weight polymer with low charge density and low molecular weight polymer with high charge density, were applied in this study. The more beaten OCC stock showed the lower dryness after wet pressing. The addition of polymer aids had great influences on the wet pressing efficiency and paper properties. The dryness after wet pressing was increased by the addition of polymer aids, but the pattern of changes in dryness were different depending on the type of polymer and the properties of stock. The higher molecular weight polymer aids showed the greater increase in the dryness. The properties of paper such as air permeability, bulk, formation, tensile strength were also greatly affected by the addition of polymer aids.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.458-467
• /
• 2001

Optimistic Two-Phase Locking(O2PL) performs as well as or better than the other approaches because it exploits client caching well and also has relatively lower network bandwidth requirements. However, O2PL leads to unnecessary waits, because, it can not be commit a transaction until the transaction obtains all requested locks. In addition, Optimistic Concurrency Control(OCC) tends to make needless aborts. This paper suggests an efficient optimistic cache consistency protocol that overcomes such shortcomings. Our scheme decides whether to commit or abort a transaction without wait and it adopts transaction re-ordering in order to minimize the abort rate. Our scheme needs only one version for each data item in spite of the re-ordering mechanism used. Finally, this paper presents a simulation-based analysis that shows superiority in performance of out scheme to O2PL and OCC.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.19-28
• /
• 1996

In Asia countries the productions of ship building and marine engines have been increasing, specially Japanese marine industries have worked hard after 1960s and Korean ones after 1980s. Recently the other countries, as Taiwan and China, have been working so that these hour Asian countries are occuping the high level of shared ratio of productions for gross tonnages and horse powers, which are 74 and 64[%] of the world ones ($8.6\times10$+6[GT], $8.6\times10$+6[PS]) in 1994. Korean industries had the highest shared ratio of production of tanker vessel and 2 stroke diesel engine as 45[%]($2.2\times10$+6[GT]) and 37[%]($1.0\times10$+6[PS]) which were more than those of Japan as 34 and 16[%] in 1989 respectively. Some marine databases and their network links among Asian countries are proposed due to the posibility of collection and analyses with their own specifications by the marine industries and operators as well as Japanese ship reliability investigation works(SRIW) like SRIC in Japan. During 1966 and 1996 16 times of SRIW in Japan have been carried out by ship reliability investigation group(SRIG) in Japan. There have been collected and evaluated a great number of field data of failures and maintenances($700\times10$+3[occ], $1.6\times10$+6[MH}) during running hours($13.4\times10$+6[Hrs]), from which many kinds of evaluation indices could be gotten as the three indices of occurring rate$\lambda$(52.2[occ/1000Hrs]), average man-hour mh(2.29[MH/occ]) and manning index MI(119[MH/1000Hrs]). An estimation example having the three indices$\lambda$, mh and MI were shown by the SRIC 1990 Data Base in Japan for the two kinds of fuel oil suppling subsystems which are dual fuel oil one(DFOS) and mono fuel oil one(MFOS). Three indices MI, and mh for DFOS and MFOS results in 7.16 and 5.20[MH/1000Hrs], 2.63 and 2.06[occ/1000 Hrs]. Therefore the more simple subsystem MFOS can save approximately 30[%] of maintenance load. Finlly an utilization methods are shown for the SRIC in Japan by means of computer system and worlwide internet links.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.71-71
• /
• 2000

Recycled fibers usually give slow drainage in the paper forming zone on papermachine, which limit the application of more refining to the fibers for improving paper strength and formation. To use recycled fibers, especially, OCC, more effectively, developing very efficient handling technique of short fibers and fines is inevitable. We tried to make hard flocs of fractionated short fibers and fines, which were the main cause of slow drainage, by adding excessive amount of retention aid on them. This technique was proved to increase drainage with no difference in strength properties, compared to the conventional technique of adding the same amount of polymers to the whole furnish in the lab test. The bonding capability of short fibers and fines in Korean OCC were very poor to be considered as ´fillers´in paper products. Various chemical treatment on the short fibers and fines of the Korean OCC did not improve their bonding and optical properties. One of the reasons of no improvement in their properties was thought to be their high amount of ashes (over 30% in the fractionated samples).

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.471-474
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as old corrugated containers (OCC) and old newspapers (ONP) with a vacuum forming method. The plate-like cushioning materials made of OCC and ONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^{3}$) were a little higher than that of EPS (${\approx}0.03g/cm^{3}$) and much lower than that of pulp mold (${\approx}0.3g/cm^{3}$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of OCC fibers containing more lignin than ONP show better shock-absorbing properties than ONP Moreover, the cushioning materials made of OCC and ONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to an increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a great role in improving shock-absorbing ability.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.71-76
• /
• 2012

Malignant mesothelioma is an uncommon but rapidly fatal disease for which the principal aetiological agent is exposure to asbestos. Mesothelioma is of particular significance in Australia where asbestos use was very widespread from the 1950s until the 1980s. Exposure to asbestos includes occupational exposure associated with working with asbestos or in workplaces where asbestos is used and also 'take-home' exposure of family members of asbestos exposed workers. Asbestos exposure may also be nonoccupational, occurring as a consequence of using asbestos products in non-occupational contexts and passive exposure is also possible, such as exposure to asbestos products in the built environment or proximity to an environmental source of exposure, for example an asbestos production plant. The extremely long latency period for this disease makes exposure assessment problematic in the context of a mesothelioma registry. OccIDEAS, a recently developed online tool for retrospective exposure assessment, has been adapted for use in the Australian Mesothelioma Registry (AMR) to enable systematic retrospective exposure assessment of consenting cases. Twelve occupational questionnaire modules and one non-occupational module have been developed for the AMR, which form the basis of structured interviews using OccIDEAS, which also stores collected data and provides a framework for generating metrics of exposure.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.04a
• /
• pp.285-297
• /
• 2007

As the demands of environment protection increase, the pulp mold container is developed to substitute for the plastic cushion materials like EPS(expanded poly styrene). The water-absorbing ratio, tensile strength and compressive strength of pulp mold are important factors to evaluate its shock absorbing characteristics. The study was performed to investigate the effects of the mechanical property changes on the various conditions of temperature and relative humidity for pulp mold containers made of mixed materials on ONP(old newspaper) and OCC(old corrugated container). This study also is evaluated the optimized mixing ratio of materials for making pulp mold by analyzing the changes of physical properties according to a various procured temperature and relative humidity conditions. The results show that the water absorption ratio of sample increased significantly, and tensile strength decreased $20{\sim}30%$, compressive strength decreased $10{\sim}20%$ by increasing relative humidity condition. And the results show that the ONP 50% and OCC 50% was optimized mixing ratio according to the samples.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2016

In this paper, we propose an algorithm for optimal selection of communications for smart lighting in heterogeneous networks. The smart lighting can be used for information communications and lighting simultaneously. To improve BER performance of smart lighting in heterogeneous networks, it adaptively selects a communication method among OCC, Wi-Fi, BLE based on distance between sensors and smart lightings, low power consumption for user requirements, operating time of smart lighting in Line-of-Sight(LOS)/Non-LOS channels. Thus, simulation results demonstrate effectiveness of the proposed algorithm contrary to baseline methods in LOS/NLOS channels.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.05a
• /
• pp.17-17
• /
• 2002

국내 제지 산업에서 큰 비중을 차지하고 있는 골판지 원지는 주로 국내에서 발생되는고지를 원료로 생산되고있다. 2001년 제지 통계에 따르면 우리나라의 고지재활용율은 세계 최고 수준으로 지류 재활용 비율이 약 72%에 달하며 그중 국산 폐지사용량은 해마다 꾸준히 증가하여 2001년 62%에 이르렀다. 하지만 고지의 재활용율이 증가함에 따라 많은 기술적, 품질적 문제가야기되어 강도저하, 공정 및 품질 저하가 날로 심각해지고있는 것이 현실이다. 본 연구에서는 국내 골판지 원지의 해섬특성을 알아보고 조성이 상이한 원료 물질의 해섬특성 곡선을 조사한 후 골판지 원지의 원료로 가장 널리 사용되고 있는 KOCC의 물성개선 가능성을모색하기 위해 분급 및 기계적 처리를 적용하고 도입 효과를 살펴보았다. 다양한 조성으로 구성된 OCC 고지의 해리에 따른 해섬 현상을 살펴보기 위해 각각의 원지와 조성이 상이한 원료물질의 해섬 특성 곡선을 조사하였다. 저농도 해리기를 이용하여 농도와 revolution의 변수를 주어 해리를 실시하고 스크린을 이용하며 미해리분을 측정하여 해섬 특성 곡선을 평가하였다. 또한 가장 널리 사용되고 있는 원료인 KOCC의 분급에 의한 물성 개선 가능성을 모색하기 위해 실험실적인 모텔링에 의한 분급과 기계적인 처리를 실시하여 물성을 평가하였다. 모델링은 UKP와 KOCC 100%인 골판지 원지를 이용하였으며 압축강도, 인장강도, 파열강도를 측정하였다. 현장에서의 적용가능성을 살펴보기 위해 현장에서의 Multi fractor를 이용하여 분급된 지료를 채취하여 물리적인 처리를 가한 후 수초하여 물성을 평가하였다. 그 결과 분급 및 기계적인 처리에 의한 펄프의 특성은 단섬유의 재활용에 대한 고려가 있을 경우 물성개선을 위한 해결방법으로 활용될 수 있다고 판단되었다.