• 대한화학회지
• /
• 제51권3호
• /
• pp.240-243
• /
• 2007

8배위 이트륨(III) 화합물 Y(tpb)3(H2O)2을 합성하였고 X-선 회절법으로 구조를 규명하였다. 이 화합물은 12 면체의 구조를 가지며, 두 면(Y-O2-O1-O5-O6 and Y-O4-O3-O8-O7)사이의 각은 89.59o이다. 또한, O1-O5과 O3-O8 의 거리는 2.965 and 2.995 A이며 O2-O6과 and O4-O7의 거리는 4.256 and 4.403 A이다.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.472-477
• /
• 2000

Oxides of the form Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Electrical properties of Mn$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO power NTC thermistor such as I-V characteristics tim constant activation energy and heat dissipation coefficient measured as a function of temperature and composition. In Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO system with the 5wt% addition of Co$_{3}$/O$_{4}$ it can be seen that resistivity and B-constant were increased as the ratio of ZnO/Mn$_{3}$/O$_{4}$ was increased. Heat dissipation constant, I-V characteristics and time constant showed similar behaviour compared with those of conventional thermistors. In particular resistance change ratio ($\Delta$R) the important factor for reliability varied within $\pm$5% indicating the compositions of these products could be available for power thermistor.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.35-41
• /
• 1988

In the system of Li2O-MgO-Al2O3-Cr2O3, the crystalline solid solution of LiCrO2 along the pseudo-binary join between rocksalt structure(LiCrO2) and spinel structure(MgCr2O4 or MgAl2O4) have been investigated by x-ray diffraction techniques. In this study, order-disorder phase transition of LiCrO2 was observed and the unit cell of the disordered LiCrO2 structure has been established. It has been found that LiCrO2 makes a solid solution over a wide range with MgAl2O4, while not with MgCr2O4. This difference was explained as being due to the ability of oxygen lattice distortion which depended on the relative sizes and chemical bonding characteristics of the substituted ions.

• 청정기술
• /
• 제21권1호
• /
• pp.39-44
• /
• 2015

본 연구에서는 다섯 종의 씨앗(춘채, 아욱, 양배추, 배추, 당근)을 이용하여 금속산화물 나노입자(CuO, NiO, Fe₂O₃, Co₃O₄, TiO₂, ZnO)들이 씨앗발아와 발아지수에 미치는 영향을 조사하였다. CuO, ZnO, NiO 나노입자는 씨앗 활성에 뚜렷한 독성 영향을 나타내었으며, 나노입자종류에 따라 상이한 민감도를 나타내었다. 각 나노입자에 대한 독성순서(EC₅₀ 범위)는 다음과 같다: CuO 6~27 mg/L > ZnO 16~86 mg/L > NiO 48~112 mg/L. 나머지 조사 대상 나노입자인 Co₃O₄, TiO₂, Fe₂O₃은 최대 1,000 mg/L 높은 농도 노출에도 뚜렷한 영향을 나타내지 않았다. 씨앗별 상이한 민감도를 나타내었으며, 가장 민감한 종인 아욱의 씨앗발아 EC₅₀은 CuO 5.5 mg/L ZnO 16.4 mg/L, NiO 53.4 mg/L로 조사되었다. 씨앗별 나노입자에 대한 독성 영향은 CuO > ZnO > NiO > Fe₂O₃ ≈ Co₃O₄ ≈ TiO₂ 나타났으나, 당근씨앗은 NiO [EC₅₀ 80.4(71.41~90.54) mg/L]와 ZnO [EC₅₀ 85.8(69.31~106.29) mg/L]가 유사한 독성을 나타내었다.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.395-403
• /
• 2006

[ $MgAl_2O_4$ ] 막은 MgO 보호막 보다 단단하며 수분 흡착 오염 문제에 상당히 강한 특성을 가진다. 본 연구에서 AC-PDP 의 유전체보호막으로 사용되는 MgO 보호막의 특성을 개선하기 위해 $MgAl_2O_4/MgO$ 이중층 보호막을 제작하여 특성을 조사하였다. 전자빔 증착기를 사용하여 Cu 기판에 MgO 와 $MgAl_2O_4$을 각각 $1000\AA$ 두께로 증착, $MgAl_2O_4/MgO$ 을 $200/800\AA$ 두께로 적층 증착 후, 이온빔에 의한 충전현상을 제거하기 위해 Al 을 $1000\AA$ 두께로 증착하였다. 집속 이온빔 (focused ion beam: FIB) 장치를 이용하여 10 kV 에서 14 kV 까지 이온빔 에너지에 따라 MgO는 $0.364{\sim}0.449$ 값의 스퍼터링 수율에서 $MgAl_2O_4/MgO$ 을 적층함으로 $24{\sim}30 %$ 낮아진 $0.244{\sim}0.357$ 값의 스퍼터링 수율이 측정되었으며, $MgAl_2O_4$는 가장 낮은 $0.088{\sim}0.109$ 값의 스퍼터링 수율이 측정되었다. g-집속이온빔 (g-FIB) 장치를 이용하여 $Ne^+$ 이온 에너지를 50 V 에서 200 V 까지 변화시켜 $MgAl_2O_4/MgO$ 와 MgO 는 $0.09{\sim}0.12$의 비슷한 이차 전자방출 계수를 측정하였다. AC- PDP 셀의 72 시간 열화실험 후 SEM 및 AFM으로 열화된 보호막의 표면을 관찰하여 기존의 단일 MgO 보호막과 $MgAl_2O_4/MgO$의 적층보호막의 열화특성을 살펴보았다.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1525-1528
• /
• 2005

The synthesis and characterization of ${K_3[Ru(C_2O_4)3]{\cdot}4H_2O\;(C_2O_4}^{2-}$ = oxalato anoin) complex are described, and its redox properties (in buffer solution of pH = 12) have been investigated. This complex is used for in situ generation of oxoruthenates complexes which have been characterized by electronic spectroscopy. Reaction of ${K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ with excess ${S_2O_8}^{2-}$ in molar KOH generates trans-${[RuO_3(OH)_2]^{2-}/S_2O_8}^{2-}$ reagent while with excess ${BrO_3}^-$ in molar $Na_2CO_3$ generates ${[RuO_4]^-/BrO_3}^-$ reagent. Avoiding the direct use of [$RuO_4$] the organic-soluble $(n-Pr_4N)^+[RuO_4]^-$, (TPAP) has been isolated by reaction of $K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ with excess ${BrO_3}^-$ in molar carbonate and n-$Pr_4$NOH. In a mixture of $H_2O/CCl_4$ ruthenium tetraoxide can be generated by reaction of $K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ with excess ${IO_4}^-$. The catalytic activities of oxoruthenates that have been made from $K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ towards the oxidation of benzyl alcohol, piperonyl alcohol, benzaldehyde and benzyl amine at room temperature have been studied.

• 한국세라믹학회지
• /
• 제31권5호
• /
• pp.505-512
• /
• 1994

It has been reported that a biocement obtained by mixing CaO-SiO2-P2O5 glass powder and ammonium phosphate solution has biocompatibility as well as high strength. However, the compositional dependence on its hardening and hydroxyapatite formation phenomena has not been studied. Therefore, the main objective of this work is to study the effects of P2O5, MgO in CaO-SiO2 system glass on the hardening and hydroxyapatite formation. When more than 50 mole% of CaO containing CaO-SiO2 glasses was reacted with ammonium phosphate solution, CaNH4PO4.H2O crystal was formed, but the glass with less than 50 mol% of CaO formed (NH4)2HPO4 and NH4H2PO4 crystals which are derived from ammonium phosphate solution without reacting with the glasses. As the amount of P2O5 in CaO-SiO2-P2O5 glass system was increased, the formation of CaNH4PO4.H2O crystal was enhanced. When those hardened samples were reacted with tris-buffer solution, hydroxyapatite was obtained only for the sample with CaNH4PO4.H2O. While the substitution of MgO for CaO decreased the formation of CaNH4PO4.H2O crystal. MgNH4PO4.H2O crystla was formed in high MgO containing glass, which did not react with tris-buffer solution.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.620-625
• /
• 2012

A general synthetic method to make $Fe_3O_{4-{\delta}}$ (activated magnetite) is the reduction of $Fe_3O_4$ by $H_2$ atmosphere. However, this process has an explosion risk. Therefore, we studied the process of synthesis of $Fe_3O_{4-{\delta}}$ depending on heat-treatment conditions using $FeC_2O_4{\cdot}2H_2O$ in Ar atmosphere. The thermal decomposition characteristics of $FeC_2O_4{\cdot}2H_2O$ and the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ were analyzed with TG/DTA in Ar atmosphere. ${\beta}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method using $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$. The concentration of the solution was 0.1 M and the equivalent ratio was 1.0. ${\beta}-FeC_2O_4{\cdot}2H_2O$ was decomposed to $H_2O$ and $FeC_2O$4 from $150^{\circ}C$ to $200^{\circ}C$. $FeC_2O4$ was decomposed to CO, $CO_2$, and $Fe_3O_4$ from $200^{\circ}C$ to $250^{\circ}C$. Single phase $Fe_3O_4$ was formed by the decomposition of ${\beta}-FeC_2O_4{\cdot}2H_2O$ in Ar atmosphere. However, $Fe_3C$, Fe and $Fe_4N$ were formed as minor phases when ${\beta}-FeC_2O_4{\cdot}2H_2O$ was decomposed in $N_2$ atmosphere. Then, $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by decomposion of CO. The reduction of $Fe_3O_4$ to $Fe_3O_{4-{\delta}}$ progressed from $320^{\circ}C$ to $400^{\circ}C$; the reaction was exothermic. The degree of exothermal reaction was varied with heat treatment temperature, heating rate, Ar flow rate, and holding time. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was greatly influenced by the heat treatment temperature and the heating rate. However, Ar flow rate and holding time had a minor effect on ${\delta}$-value.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.898-901
• /
• 2004

[ $ZnCr_2O_4$ ]를 모물질로 하고 MgO, $TiO_2$를 몰비로 2:1, 4:1, 6:1, 및 8:1이 되게 정량적으로 조합한 후, 조사하였다. $ZnCr_2O_4$-MgO와 $ZnCr_2O_4-TiO_2$를 X-선 분석한 결과 Spinel 결정구조를 형성하였으며, 또한 SEM과 EDX 분석결과 각각 $Li_2CrO_4$와 $Li_3VO_4$의 형성으로 인하여 저항 특성이 나타나는 것을 알 수 있었다. $ZnCr_2O_4-MgO$, $ZnCr_2O_4-TiO_2$에서 MgO의 양이 증가할수록 저항값은 약간 감소하는 반면, $TiO_2$의 양이 증가할수록 저항값이 급격히 증가하는 특성을 나타내었고, 감습 특성에서도 M??보다 TiO2가 더 높게 나타내었다. 습에 따른 복원 특성의 경우 $700^{\circ}C$에서 소결한 ($ZnCr_2O_4:MgO=4:1$)과 ($ZnCr_2O_4:TiO_2=6:1$) 조성의 센서가 가장 양호하였다.

• 산업기술연구
• /
• 제36권
• /
• pp.77-81
• /
• 2016

Superparamagnetic $Fe_3O_4$ nanoparticles with particle size from 10 to 20 nm were synthesized by coprecipitation method. Subsequently, the $Fe_3O_4$ nanoparticles were used to fabricate $Fe_3O_4/SiO_2$ core-shell nanoparticles by sol-gel method. The $Fe_3O_4/SiO_2$ nanoparticles synthesized by sol-gel method exhibit the high uniformities of particle size and shape. We also investigated the heating characteristics of $Fe_3O_4$ and $Fe_3O_4/SiO_2$ nanoparticles for biomedical applications. The $Fe_3O_4$ nanoparticles show the faster temperature increase and the higher specific loss power(SLP) value than the $Fe_3O_4/SiO_2$ nanoparticles.