• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.192-192
• /
• 2009

AZO films were prepared by $Ar:H_2$ gas RF magnetron sputtering system with a AZO (2wt% $Al_2O_3$) ceramic target at a low temperature of $100^{\circ}C$. To investigate the influence of $H_2$ flow ratio on the properties of AZO films, $H_2$ flow ratio was changed from 0.5% to 2%. As a result, the AZO films deposited with 1% $H_2$ addition showed electrical properties with a resistivity of $5.06{\times}10^{-3}{\Omega}cm$. The spectrophotometer-measurements showed the transmittance of 86.5% was obtained by the film deposited with $H_2$ flow ratio of 1% in the range of 940nm for GaAs/GaAlAs LED.

• 자원리싸이클링
• /
• 제20권3호
• /
• pp.55-61
• /
• 2011

금속급 실리콘(MG-Si)을 태양전지용 실리콘(SOG-Si)으로 정제하기 위한 경제적인 프로세스를 구축하기 위하여 1823 K에서 CaO-$SiO_2$ 계 슬래그에 의한 붕소의 제거에 대하여 조사하였다. 본 연구에서 CaO-$SiO_2$와 $CaCO_3-SiO_2$ 슬래그의 염기도(%CaO/$%SiO_2$) 증가에 따라 B의 제거율은 각각 63%와 73%까지 증가하였다. 그러나 Ar 가스에 의한 슬래그와 실리콘의 교반 시간의 영향은 나타나지 않았다. 그리고 CaO-$SiO_2$ 계 슬래그에 $Na_2CO_3$를 첨가하였으나 그 영향은 크지 않았다. $CaCO_3-SiO_2$ 슬래그(염기도=1.2)에 의해 3회 처리한 결과 B의 농도는 1.03 ppm까지 감소하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.86-89
• /
• 2013

Dye-sensitized solar cells have a FTO/$TiO_2$/Dye/Electrode/Pt counter electrode structure, yet more than a 10% electron loss occurs at each interface. A passivating layer between the $TiO_2$/FTO glass interface can prevent this loss of electrons. In theory, ZnO has excellent electron collecting capabilities and a 3.4 eV band gap, which suppresses electron mobility. FTO glass was coated with ZnO thin films by RF-magnetron sputtering; each film was deposited under different $O_2$:Ar ratios and RF-gun power. The optical transmittance of the ZnO thin film depends on the thickness and morphology of ZnO. The conversion efficiency was measured with the maximum value of 5.22% at an Ar:$O_2$ ratio of 1:1 and RF-gun power of 80 W, due to effective prevention of the electron recombination into electrolytes.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.183-187
• /
• 2000

In this study the SrBi$_2$Ta$_2$$O_{9}$ (SBT) thin films were etched by using magnetically enhanced inductively coupled Ar/CHF$_3$plasma as function of CHF$_3$/(Ar+CHF$_3$)gas mixing ratio. Maximum etch rate of SBT thin films was 1650 $\AA$/min and the selectivities of SBT to Pt and photoresist(PR) were 1.35 and 0.94 respectively under CHF$_3$/(Ar+CHF$_3$) of 0.1 For study on etching mechanism of SBT thin film X-ray photoelectron spectroscopy (XPS) surface analyses and secondary ion mass spectrometry (SIMS) mass analysis of etched SBT surfaces were performed. Among the elements of SBT thin film. M(Sr, Bi, Ta)-O bonds are broken by Ar ion bombardment and form SrF and TaF$_2$by chemical reaction with F. SrF and TaF$_2$are removed more easily by Ar ion bombardment. Scanning electron microscopy(SEM) was used for the profile examination of etched SBT film and the cross-sectional SEM profile of etched SBT film under CHF$_3$(Ar+CHF$_3$) of 0.1 was about 85$^{\circ}$X>.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 2001

MFISFET(Metal-ferroelectric-insulator-semiconductor-field effect transistor)에의 적용을 위한 절연체로서 CeO$_2$ 박막을 r.f. magnetron sputtering법에 의해 제조하였다. 스퍼터링시 증착개스는 Ar과 $O_2$를 사용하였으며 산소분압비에 따른 $CeO_2$박막의 결정성 및 전기적 특성에 미치는 영향을 평가하였다. p형-Si(100)기판 위에 $600^{\circ}C$에서 증착된 $CeO_2$ 박막들은(200)방향으로 우선방향성을 가지고 성장하였으며 Ar만으로 증착된 박막의 우선방향성은 증가하였으나 상대적으로 많은 하전입자와 표면 거칠기로 인해 C-V특성에서 큰 이력특성을 보였고 산소분압비가 증가함에 따라 양호한 특성을 보였다. 이것은 이동가능한 이온전하의 감소에 기인한다고 할 수 있다. Ce:O의 비는 모든 박막에서 1:2.22~2.42를 보여 산소과잉의 조성을 나타냈으며 산소분압비에 따라 제조된 박막들의 누설전류값은 100 kV/cm의 전계에서 $10^{-7}$~$10^{-8}$A의 차수를 보였다.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.376-382
• /
• 2022

Yb₂Si₂O₇ has a coefficient of thermal expansion similar to that of the base material of SiC and has excellent corrosion resistance in a high-temperature oxidizing atmosphere including water vapor, so it is being studied as one of the materials for environmental barrier coatings (EBCs). In this study, Yb₂Si₂O₇ powder granule is deposited using atmospheric plasma spraying (APS) with different Ar/He ratios. Phase formation and microstructural characteristics are investigated with the coated specimens. In the coating layer, the crystallinity decreased, and the amorphous content increased from an increase in the ratio of Ar. In addition, the various types of particles involved by local volatilization of Si according to the Ar/He ratios were identified.

• 한국재료학회지
• /
• 제10권12호
• /
• pp.807-811
• /
• 2000

MFISFET (Metal-ferroelectric-nsulator-semiconductor-field effect transistor)에의 적용을 위해 CeO$_2$와 SrBi$_2$Ta$_2$O$_{9}$ 박막을 각각 r.f. sputtering 및 pulsed laser ablation법으로 제조하였다. CeO$_2$ 박막은 증착시 스퍼터링개스비 (Ar:O$_2$)에 따른 특성을 고찰하였다. Si(100) 기판 위에 $700^{\circ}C$에서 증착된 CeO$_2$ 박막들은 (200)방향으로 우선방향성을 가지고 성장하였고 $O_2$ 개스량이 증가함에 따라 박막의 우선방향성, 결정립도 및 표면거칠기는 감소하였다. C-V특성에서는 Ar:O$_2$가 1 : 1인 조건에서 제조된 박막이 가장 양호한 특성을 보였다. 제조된 박막들의 누설전류값은 100kV/cm의 전계에서 $10^{-7}$ ~$10^{-8}$ A의 차수를 보였다. CeO$_2$/Si 기판위에 성장된 SBT는 다결정질상의 치밀한 구조를 가지고 성장을 하였다 80$0^{\circ}C$에서 열처리된 SBT박막으로 구성된 MFIS구조의 C-V 특성에서 memory window 폭은 0.9V를 보였으며 5V에서 4$\times$$10^{-7}$ A/$\textrm{cm}^2$의 누설전류밀도를 보였다.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ]박막은 DC 마그네트론 스퍼터링법을 이용하여 다양한 스퍼터링 파라미터(전력 $0.6{\sim}5.2\;kw$, 기판온도 실온${\sim}350^{\circ}C$, 산소량 $0{\sim}50\;sccm$($O_2+Ar$ 90 sccm, 압력은 약 1 mtorr))를 통하여 증착되었다. TiO-N박막도 가스의 유량비를 제외하고는 $TiO_2$박막과 같은 스퍼터링 조건하에서 증착되었다. 이러한 스퍼터링 파라미터에서 증착된 박막의 전기적 특성을 분석하기 위하여 시트저항을 측정하였고, 박막의 두께(${\alpha}$-step), 표면 거칠기(AFM), 형성 조직(FE-SEM, XRD)을 분석하여 최적 스퍼터링 파라미터를 도출하였다. 최적 스퍼터링 파라미터에서 제조된($TiO_2$, TiO-N)박막을 이용하여 광활성도를 평가하기 위하여 VOCs물질 중 toluene, 반응성 염료인 Suncion Yellow를 대상 물질로 선정하여 적용성 연구를 수행하였다. 실험에서 광촉매 박막은 적용물질에 대해서 광활성을 양호하게 보였으며, 특히 TiO-N광촉매 박막은 가시광 영역에서도 최대 33%의 톨루엔(5 ppm) 제거 효율을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.319-324
• /
• 2002

In this study, the reduce of plasma etching damage in PZT thin film with addictive gas and re-annealing after etching have been investigated. The PZT thin films were etched as a function of $Cl_2/CF_4$ with addition of Ar and $O_2$ with inductively coupled plasma. The etch rates of PZT thin films were 1450 ${\AA}/min$ at 30% additive Ar and 1100 ${\AA}/min$ at 10% auditive $O_2$ into $Cl_2/CF_4$ gas mixing ratio of 8/2. In order to reduce plasma damage of PZT thin films after etching, the etched PZT thin films were re-annealed at various temperatures at $O_2$ atmosphere. From the hysteresis curries, the ferroelectric properties are improved by $O_2$ re-annealing process. The improvement of ferroelectric behavior at annealed PZT films is consistent wish the increase of the (100) and (200) PZT peaks revealed by x-ray diffraction (XRD). From x ray photoelectron spectroscopy (XPS) analysis, the intensity of Pb-O, Zr-O and Ti-O peak are increased and the chemical residue peak is reduced by $O_2$ re-annealing. The ferroelectric behavior consistent with the dielectric nature of $Ti_xO_y$ is recovered by $O_2$ recombination during rapid thermal annealing process.

• Transactions on Electrical and Electronic Materials
• /
• 제4권2호
• /
• pp.29-34
• /
• 2003

Ferroelectric YMnO$_3$ thin films were etched with Ar/C1$_2$ and CF$_4$/C1$_2$ Plasma. The maximum etch rate of YMnO$_3$ thin film was 300 $\AA$/min at a Cl$_2$/Ar gas mixing ratio of 8/2, an RF power of 800 W, a do bias of-200 V, a chamber pressure of 15 mTorr, and a substrate temperature of 3$0^{\circ}C$. From the X-ray photoelectron spectroscopy (XPS) analysis, yttrium was not only etched by chemical reactions with Cl atoms, but also assisted by Ar ion bombardments in Ar/C1$_2$ plasma. In CF$_4$/C1$_2$ plasma, yttrium formed nonvolatile YF$_{x}$ compounds and remained on and the etched surface of YMnO$_3$. Manganese etched effectively by forming volatile MnCl$_{x}$ and MnF$_{y}$. From the X-ray diffraction (XRD) analysis, the (0004) diffraction peak intensity of the YMnO$_3$ thin film etched in Ar/Cl$_2$ plasma shows lower than that in CF$_4$/Cl$_2$ plasma. It indicates that the crystallinty of the YMnO$_3$ thin film is more easily damaged by the Af ion bombardment than the changes of stoichiometry due to nonvolatile etch by-products.cts.s.