• 한국재료학회지
• /
• 제11권3호
• /
• pp.227-235
• /
• 2001

본 연구의 목적은 기존의 고상 반응법을 이용하여 일본의 상용 Zn$_2$SiO$_4$:Mn형광체보다 우수한 성능의 형광체를 제조하는데 있다. 이틀 위해 본 연구에서는 고상 반응법을 이용하여 Zn$_2$SiO$_4$:Mn 형광체를 합성하고, 이를 PDP(Plasma Display Panel)에 적용하기 위하여 소성온도 및 환원 온도와 주입되는 기체의 양, dopant Mn의 농도를 다양하게 하여 합성하였고, ball milling 등을 통하여 입자의 특성을 개선하는 실험을 하였다. 제조된 형광체의 발광특성 및 모양 등의 특성은 상용 Zn$_2$SiO$_4$:Mn 형광체와 비교하였다. Mn의 농도를 0.08mo1e로 하여 130$0^{\circ}C$에서 소성하였을 때 결정성 및 휘도가 가장 우수하였고, 환원시 5% H$_2$-96% N, 혼합가스의 양을 100ml/rnin으로 일정하게 주입시켰을 때 20%이상 휘도가 증가하였다. Ball rnilling은 30분 동안 100rpm으로 하였을 때 입자의 크기가 수십 $\mu\textrm{m}$에서 3$\mu\textrm{m}$이하로 줄어들었다. 특히. 발광 특성이 상용 형광체보다 월등히 우수하여 PDP에 적용할 수 있다

• 생물환경조절학회지
• /
• 제29권4호
• /
• pp.464-472
• /
• 2020

본 연구에서는 플라즈마 발생장치를 수경재배 시스템과 결합하여 재배 기간 동안 처리 시 상추의 생육 및 기능성 물질 함량 변화를 살펴보기 위해 실시하였다. 3주 동안 육묘하여 균일한 크기의 상추 묘를 semi-DFT에 정식하였으며, 플라즈마 공정 장치를 결합하여 4주 동안 8시간 주기로 1시간씩 수중에서 간헐적으로 작동시켰다. 양액(대조구), 플라즈마 활성수(4.2kV, 5.7kV)를 사용하여 온실에서 재배하였으며 이후 수확하여 생육조사 및 기능성 물질 분석을 실시하였다. 플라즈마 활성수 처리 기간 동안 발생되는 활성산소종 중에서 O₃로 인하여 플라즈마 발생 장치에 근접한 개체일수록갈색 반점 및 괴사현상이 나타났으며, 생육조사를 실시한 결과 유의적 차이가 나타나지 않았다. 기능성 물질 분석 결과 상추 지상부의 rutin과 총 페놀 함량은 플라즈마수보다 높았지만, epicatechin의 경우 플라즈마수 처리에서 함량이 더 많았다. 근권부에서 측정된 이차대사산물인 rutin, epicatechin, quercetin 및 총 페놀 함량은 대조구보다 플라즈마수 처리구에서 유의하게 높았다. 이러한 결과는 플라즈마수 처리 시간동안 수중에 오존과 같은 활성산소종으로 인해 지상부 생육이 잘 이루어지지 못했으나, 근권 영역에서는 이차대사산물이 크게 증가하였다. 향후 간헐적인 플라즈마 활성수 생성에 따른 생리 장해를 극복하고 뿌리채소의 수경재배 시스템에 적용하여 이차대사산물을 증가시키기 위한 본 기술의 도입이 필요하다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권3호
• /
• pp.434-442
• /
• 2008

The objective of this study was to determine the optimum ratio of methionine to methionine plus cystine for growing pigs. A nitrogen balance trial was conducted using a total of 21 barrows (Large WhiteLandrace) over two replicates. The initial body weight was $20.36{\pm}1.22kg$ (mean${\pm}$SD) in the first replicate and $23.54{\pm}1.02kg$ (mean${\pm}$SD) in the second. For each replicate, the 21 pigs were randomly assigned to one of seven dietary treatments with three observations per treatment. The diets included a methionine and cystine-deficient basal diet with all other essential nutrients meeting nutrient requirements and six diets formulated with graded levels of DL-methionine (0.00, 0.03, 0.06, 0.10, 0.13, 0.16%) and $L-Cystine{\cdot}HCl{\cdot}H_2O$ (0.19, 0.15, 0.11, 0.07, 0.04, 0.00%). This resulted in ratios of methionine to methionine plus cystine of 41.3, 29.6, 35.3, 41.2, 46.0, 51.6 and 57.5%. Each experimental period lasted 12 days consisting of a seven-day adaptation period followed by a five-day total collection of urine and feces. During the collection period, pigs were fed 900 g/day for the first replicate and 1,200 g/day for the second replicate. The feed was provided in three equal portions at 0800, 1500, and 2200 h daily. Pigs had ad libitum access to water after feeding. There was a linear (p<0.01) and quadratic (p<0.01) effect on daily gain and feed conversion as the ratio of methionine to methionine plus cystine increased. Pigs receiving the diets providing a methionine to methionine plus cystine ratio of 51.6% had the best daily gain and feed conversion. Plasma urea nitrogen was also lowest for this treatment. Nitrogen retention increased (p<0.01) as the relative proportion of methionine increased up to 51.6% and then a downward trend occurred at 57.5%. The quadratic regression model, as well as one- and two- slope regression line models, were used to determine the optimum ratio of methionine to methionine plus cystine. Eliminating the 35.3% methionine to methionine plus cystine treatment resulted in $R^2$ values in excess of 0.92. The optimal ratio of methionine to methionine plus cystine was estimated to be 54.15% for nitrogen retention and 56.72% for plasma urea nitrogen.

• 마이크로전자및패키징학회지
• /
• 제19권3호
• /
• pp.77-82
• /
• 2012

본 연구에서는 칩을 기판에 내장하기 위해 상용화된 CSR사의 bluetooth chip을 이용하여 표면의 솔더볼을 제거하고 PCB소재와 공정을 이용하는 embedded active PCB 공정에 관한 연구를 하였다. 솔더볼이 제거된 칩과 PCB는 구리 도금 공정으로 연결되었으나 열 충격시 표면처리를 하지 않았을 시 칩의 표면과 ABF 간의 de-lamination 현상이 발견되었고, 이를 해결하기 위해 칩의 polyimide passivation layer에 디스미어와 플라즈마 공정을 이용하여 조도 형성을 하는 연구를 진행하였다. SEM(Scanning Electron Microscope) 과 AFM(Atomic Force Micrometer)을 통하여 표면을 관찰하였고, XPS(X-ray Photoelectron Spectroscopy)를 이용하여 표면의 화학적 구조의 변화를 관찰하였다. 실험결과 플라즈마 처리 시 표면 조도형성이 되었으나 그 밀도가 조밀하지 못하였지만 디스미어 공정과 함께 처리하였을 시 조도의 조밀도가 높아 열 충격을 가하였을 시에도 칩의 polyimide layer와 ABF간의 de-lamination 현상이 발견되지 않았다.

• 사상체질의학회지
• /
• 제13권2호
• /
• pp.165-176
• /
• 2001

This study demonstrates the effects of Yanggyuksanhwa-Tang, Sasang constitutional herb prescription reported its clinical effect on the stroke of the So-yang In(少陽人), on the cerebral blood flow changes induced by nitro L-arginine methyl ester (L-NAME) treatment and ischemic brain damage induced by the middle cerebral artery occlusion (MCAO) in the rats. The changes of the arterial blood pressure, cerebral blood flow, and the diameter of the pial artery were measured in rats treated with L-NAME. And the changes of the infarct size, volume, and plasma tumor necrosis factor alpha ($TNF-{\alpha}$) levels were measured in the rats that the middle cerebral artery has been occluded by the intraluminal suture thread method. Yanggyuksanhwa-Tang was administered by the i.v. injection on the L-NAME treated rats, by the i.o. administration on the MCAO rats. The results is 1. The changes of the arterial blood pressure was not different statistically between in the L-NAME treated control group and in the Yanggyuksanhwa-Tang administered group. 2. Increase in the cerebral blood flow induced by L-NAME treatment was attenuated in the Yanggyuksanhwa-Tang administered group significantly (P<0.05) as compared with the L-NAME treated control group. 3. Decrease in the diameter of the pial artery induced by L-NAME treatment was attenuated about 18% in the Yanggyuksanhwa-Tang administered group as compared with the L-NAME treated control group. 4. Ischemic damaged infarct areas were decreased significantly (P<0.05) in the interaural 12mm, 10mm, and 6mm brain sections of the Yanggyuksanhwa-Tang administered group as compared the MCA occluded control group. 5. Total ischemic infarct volume was decreased significantly (P<0.05) in the Yanggyuksanhwa-Tang administered group as compared the MCA occluded control group. 6. Plasma $TNF-{\alpha}$ levels were decreased significantly (P<0.01) in the Yanggyuksanhwa-Tang administered group as compared the MCA occluded control group.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.470-477
• /
• 2023

The effects of annealing on the microstructure and mechanical properties of Al-Zn-Mg-Cu-Si alloys fabricated by high-energy ball milling (HEBM) and spark plasma sintering (SPS) were investigated. The HEBM-free sintered alloy primarily contained Mg₂Si, Q-AlCuMgSi, and Si phases. Meanwhile, the HEBM-sintered alloy contains Mg-free Si and θ-Al₂Cu phases due to the formation of MgO, which causes Mg depletion in the Al matrix. Annealing without and with HEBM at 500℃ causes partial dissolution and coarsening of the Q-AlCuMgSi and Mg₂Si phases in the alloy and dissolution of the θ-Al₂Cu phase in the alloy, respectively. In both alloys, a thermally stable α-AlFeSi phase was formed after long-term heat treatment. The grain size of the sintered alloys with and without HEBM increased from 0.5 to 1.0 ㎛ and from 2.9 to 6.3 ㎛, respectively. The hardness of the sintered alloy increases after annealing for 1 h but decreases significantly after 24 h of annealing. Extending the annealing time to 168 h improved the hardness of the alloy without HEBM but had little effect on the alloy with HEBM. The relationship between the microstructural factors and the hardness of the sintered and annealed alloys is discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1534-1535
• /
• 2005

Highly luminescent efficiency phosphors have been successfully produced by surface modification and microwave irradiation treatment. The SEM image and XRD analysis reveal that the surface morphology of the white-light phosphors can be notably modified by microwave irradiation and exhibit with better crystalline property. The VUV PL spectra show that the microwave irradiation treatment can effectively enhance the luminescent efficiency by a factor of 1.5 times for intensity compared to that without microwave treatment. A further improvement in all visible emission can be made by modifying surface composition through MgO coating on the phosphor powder. These results demonstrate that such a simple approach can provide for improving luminescent efficiency of phosphors for the optoelectronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.622-622
• /
• 2013

Piezoelectric energy harvesting (PEH) device refers to a power device for acquiring mechanical energy from the environment surrounding us which would otherwise be wasted and for converting it into usable electrical energy. While much work has been done on developing ZnO nanogenerator (NG) with nanowire arrays, there are some issues of not only scaling up its output power but also optimizing structure for operating feasibly in various conditions. Efficiency of NG is highly dependent on fixed orientation. But in many cases, it is not easy to predict where the pressure and vibration may come from. Furthermore, the direction of the applied mechanical stress is usually non-stationary and can be random in various practical applications. Therefore an omnidirectional PEH is needed.In this work, we investigate an omnidirectional PEH device consisting ZnO nanowires. We deposited spiral patterned ZnO seed layer on Kapton film. We deposited thin Cr layer on the ZnO seed layer using DC-sputter to form a passivation layer to retard un-expected growth of ZnO nanowires. We grew ZnO nanowires along the spiral arms using hydrothermal method. ZnO nanowires have been selectively grown from the ZnO sidewall without Cr layer and have the average length of$5{\mu}m$ and the average diameter of 40nm. We reduced the defect in the as-grown ZnO nanowires by O2 plasma using asher and by thermal treatment using RTA. Consequently, each nanowire has different directions to each other. This isotropic design can lead to the omnidirectional power generation. The morphology of NG is characterized with FESEM. Maximum output power of the device is measured by using a picoammeter and a nanovoltmeter.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.193-193
• /
• 2012

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is the most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. Single-chamber PECVD system for a-Si:H solar cell manufacturing has the advantage of lower initial investment and maintenance cost for the equipment. However, in single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of single-chamber PECVD system. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. In order to remove the deposited B inside of the plasma chamber during p-layer deposition, a high RF power was applied right after p-layer deposition with SiH4 gas off, which is then followed by i-layer, n-layer, and Ag top-electrode deposition without vacuum break. In addition to the p-i interface control, various interface control techniques such as FTO-glass pre-annealing in O2 environment to further reduce sheet resistance of FTO-glass, thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, and hydrogen plasma treatment prior to n-layer deposition, etc. were developed. The best initial solar cell efficiency using single-chamber PECVD system of 10.5% for test cell area of 0.2 $cm^2$ could be achieved by adopting various interface control methods.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.582-588
• /
• 2002

Ti 기판에 TiO$_2$ 중간층을 플라즈마 용사법으로 증착 후 IrO$_2$-RuO$_2$ 박막을 졸-겔과 dip coating법으로 제조하였다. 코팅 층의 접착력을 향상시키기 위하여 유기화합물과 glass brit을 첨가하였다. Taguchi법의 망대특성과 Lls(2$^1$$\times$3$^{7}$ )의 직교배열표를 이용하여 IrO$_2$-RuO$_2$ 박막의 최적조건인 인자와 수준 조합의 최적화를 전류밀도를 측정 분산분석하였다. 최적의 코팅조건은 각각 ethyl cellulose의 점도는 100cp, 건조온도 및 시간은 17$0^{\circ}C$ 20분, 열처리온도 및 시간은 75$0^{\circ}C$ 10분, 전도성 분말과 glass frit의 무게비는 99:5, 최종열처리시간은 120분, 주입산소량은 5sccm이었다. 분산분석결과, 유의수준이 $\alpha$=0.1인 통계적으로 90%신뢰공정이었다.