• 제목/요약/키워드: O/W microemulsions

검색결과 21건 처리시간 0.016초

경피제제로서 수종의 플루비프로펜 Vehicle과 O/W 마이크로에멀젼의 평가 (Evaluation or various vehicles and O/W Microemulsions of Flurbiprofen as Transdermal Delivery System)

  • 이계원;지웅길
    • Journal of Pharmaceutical Investigation
    • /
    • 제28권3호
    • /
    • pp.141-149
    • /
    • 1998
  • In order to reduce systemic side effects following administration, flurbiprofen was formulated as O/W microemulsion consisting of the surfactant, oil phase and aqueous phase. Particle size distribution, apparent viscosity, solubility and skin permeation of flurbiprofen in various vehicles and microemulsion were evaluated. The domain of O/W microemulsion s phase diagram had difference between oil types and the area of O/W microemulsion was wide distributed by adding to PG and cosurfactant than that of water alone. As increasing 10, 15 and 20% of Brij 97 content and 1, 2.5, 5% of oil content, the solubility of flurbiprofen in O/W microemulsions and various vehicles was $400{\sim}1,000$ and $10{\sim}500$ times higher than that of control. Also, apparent viscosity of soybean oil microemulsions was higher than that of IPM microemulsions and that of vehicle were increased as increasing vehicle content. Since skin permeation of flurbiprofen decreased as increasing viscosity, in each vehicle, it was not affected 2% ${\beta}-CD$ and decreased as increasing PG content and to 2, 5 and 10% of $HP-{\beta}-CD$. In O/W microemulsion, 5% soybean oil. 20% Brij 97 and 75% water(A-1) with high viscosity showed low skin penetration.

  • PDF

Skin compatible Microemulsions obtained by a new PIT -Nano- Technology Approach

  • Jorg Schreiber;Ulrich Kux;Anja Eitrich;Wittern, Klaus-Peter;Yvonne Cierpisz
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
    • /
    • pp.392-404
    • /
    • 2003
  • A new technology to achieve o/w microemulsions allows the formulation of transparent products with low surfactant content. The PIT Nanotechnology approach gives cosmetic/pharmaceutical o/w microemulsions in one step with a broad variety of surfactants, cosurfactants and oil phases.

  • PDF

이소플라본을 함유한 마이크로에멀젼의 물성 연구 (A Study on the Characteristics of Microemulsion Containing Isoflavone)

  • 정노희;문영진;이향우;김홍수
    • 한국응용과학기술학회지
    • /
    • 제19권1호
    • /
    • pp.56-62
    • /
    • 2002
  • Microemulsion is stable to aggregation, sedimentation, fusion and has $3nm{\sim}200nm$ of particle size which is transparent and semitransparent. The isoflavone as a derivatives of Flavone is colorless crystalline compounds. It has similar basic structure to steroid materials which is hormone that acts to skin physiological phenomenon. On this study, we tried to search and demonstrate system content rate of dermal translocation system for cosmetics using O/W type microemulsion containing isoflavone. We manufactured O/W microemulsions by phase inversion emulsification method. It's was found that POE(20) monostearate with HLB value 14 caused microemulsion to be formed, which had $4nm{\sim}18nm$ of average diameter and $3nm{\sim}33nm$ of particle size distribution. Apparent viscosities of the microemulsions have increased in proportion to add surfactant dose.

Enhanced Biodegradation of Lindane Using Oil-in-Water Bio-Microemulsion Stabilized by Biosurfactant Produced by a New Yeast Strain, Pseudozyma VITJzN01

  • Abdul Salam, Jaseetha;Das, Nilanjana
    • Journal of Microbiology and Biotechnology
    • /
    • 제23권11호
    • /
    • pp.1598-1609
    • /
    • 2013
  • Organochlorine pesticide residues continue to remain as a major environmental threat worldwide. Lindane is an organochlorine pesticide widely used as an acaricide in medicine and agriculture. In the present study, a new lindane-degrading yeast strain, Pseudozyma VITJzN01, was identified as a copious producer of glycolipid biosurfactant. The glycolipid structure and type were elucidated by FTIR, NMR spectroscopy, and GC-MS analysis. The surface activity and stability of the glycolipid was analyzed. The glycolipids, characterized as mannosylerythritol lipids (MELs), exhibited excellent surface active properties and the surface tension of water was reduced to 29 mN/m. The glycolipid was stable over a wide range of pH, temperature, and salinity, showing a very low CMC of 25 mg/l. Bio-microemulsion of olive oil-in-water (O/W) was prepared using the purified biosurfactant without addition of any synthetic cosurfactants, for lindane solubilization and enhanced degradation assay in liquid and soil slurry. The O/W bio-microemulsions enhanced the solubility of lindane up to 40-folds. Degradation of lindane (700 mg/l) by VITJzN01 in liquid medium amended with bio-microemulsions was found to be enhanced by 36% in 2 days, compared with degradation in 12 days in the absence of bio-microemulsions. Lindane-spiked soil slurry incubated with bio-microemulsions also showed 20-40% enhanced degradation compared with the treatment with glycolipids or yeast alone. This is the first report on lindane degradation by Pseudozyma sp., and application of bio-microemulsions for enhanced lindane degradation. MEL-stabilized bio-microemulsions can serve as a potential tool for enhanced remediation of diverse lindane-contaminated environments.

Budesonide Microemulsions for Enhancing Solubility and Dissolution Rate

  • Piao, Hong-Mei;Cho, Hyun-Jong;Oh, Eui-Chaul;Chung, Suk-Jae;Shim, Chang-Koo;Kim, Dae-Duk
    • Journal of Pharmaceutical Investigation
    • /
    • 제39권6호
    • /
    • pp.417-422
    • /
    • 2009
  • Budesonide belongs to Class II in the Biopharmaceutics Classification System (BCS) for its high permeability and poor aqueous solubility. The purpose of this study was to improve the solubility and dissolution rate of budesonide using an o/w microemulsion system in order to develop a nasal formulation. Based on the results of the solubility study and pseudo ternary phase diagrams, microemulsions of about 80 nm in mean diameter were formulated using isopropyl myristate and Labrasol$^{(R)}$ as an oil phase and a surfactant, respectively. Solubility of budesonide in the microemulsions increased up to 6.50 mg/mL, which is high enough for a nasal formulation. In vitro release profiles of budesonide significantly increased from the microemulsions compared to that of the budesonide powder. These results suggest that the microemulsions of budesonide could further be developed into a clinically useful nasal formulation.

희석 방법에 따른 나노에멀젼 형성 연구 (Study of Nano-emulsion Formation by Different Dilution Method)

  • 조완구;한상길
    • 대한화장품학회지
    • /
    • 제38권3호
    • /
    • pp.201-207
    • /
    • 2012
  • Oil-in-ethanol (O/E) 마이크로에멀젼을 물에 희석하여 얻은 O/W 나노에멀젼의 성질에 대하여 다른 희석 과정의 영향을 연구하였다. 물/에탄올/비이온성계면활성제/실리콘 오일 계를 모델 계로 선택하였다. 희석과정은 물(또는 마이크로에멀젼)을 마이크로에멀젼(또는 물)에 단계별로 첨가하는 방법으로 구성되었다. O/E 마이크로에멀젼을 물에 첨가하여 혼합하면 30 nm 정도의 입경을 가진 나노에멀젼을 얻을 수 있었다. 반면에 물을 O/E 마이크로에멀젼에 첨가하면 400 nm의 입경을 가진 에멀젼을 얻을 수 있다. 희석 방법이 얻어지는 에멀젼의 성질에 중요한 역할을 하였다. 시간에 따른 나노에멀젼의 입자 변화는 관찰되지 않았으나 입자가 큰 에멀젼은 시간에 따라 입경이 증가하였으며 불안정화 기작은 오스트왈드 라이퍼닝으로 추정되었다.

AOT W/O 마이크로에멀젼을 이용한 할로겐화은 나노입자 제조에서 연속상 오일의 영향 (Effect of Continuous Oil Phase on Preparation of Silver Halide Nanoparticles using AOT-Based W/O Microemulsions)

  • 정길용;임종주
    • Korean Chemical Engineering Research
    • /
    • 제45권4호
    • /
    • pp.364-371
    • /
    • 2007
  • 본 연구에서는 연속상의 종류가 AOT 계면활성제 시스템의 water-in-oil(W/O) 마이크로에멀젼을 이용한 할로겐화은 나노입자 제조에 미치는 영향에 관하여 살펴보았다. 이를 위하여 계면활성제, 연속상 오일, 무기염 수용액으로 이루어진 삼성분 시스템에 대하여 탄화수소의 연속상 종류를 변화하면서 상평형 실험을 수행한 결과, 탄화수소의 사슬 길이가 증가함에 따라 계면활성제 시스템의 친수성이 증가하여 단일상으로 존재하는 W/O 마이크로에멀젼 영역은 증가하였다. 상평형 실험결과에 의하여 결정된 단일상의 영역 내에서 W/O 마이크로에멀젼을 이용하여 할로겐화은 나노입자를 제조한 결과, 10 nm 전후의 구형에 가까운 비교적 균일한 입자가 형성되었다. 사용한 연속상 탄화수소의 사슬 길이가 증가할수록 마이크로에멀젼의 film rigidity를 감소시킴에 따라 마이크로에멀젼 사이의 교환 속도가 빨라져서 생성된 할로겐화은 나노입자의 크기는 작아지고 반면에 개수는 증가하였다. 또한 동일한 시스템에서 무기염 수용액의 조성을 증가시킴에 따라 생성된 나노입자의 크기는 증가함을 알 수 있었다.

마이크로에멀젼을 이용한 탈니플루메이트의 가용화 (Solubilization of Talniflumate in Microemulsion Systems)

  • 이계원;조영호;김학형;김석영;김도균;김은혜
    • Journal of Pharmaceutical Investigation
    • /
    • 제38권3호
    • /
    • pp.171-176
    • /
    • 2008
  • Talniflumate is a nonsteroidal anti-inflammatory drug (NSAID), which has been used treat of rheumatoid diseases, is insoluble in water, therefore it has low bioavailability after oral administration. The purposes of this study were to prepare O/W or W/O microemulsions for solubilization of poorly water soluble drug, talniflumate and to formulate into other dosage form. For this purpose, we made O/W or W/O microemulsion with oil(soybean oil, IPM), surfactant (Cremophor $EL^{(R)}$, Tween 80) and water or propylene glycol and evaluated solubility of talniflumate. The microemulsion systems were very stable and showed transmittance above 95% without flocculation or aggregation. Especially, the solubility of talniflumate in the formulation B-1 containing 18% of isopropyl myristate and 71% of tween 80 was 10 times higher than that of other O/W microemulsions. The addition of propylene glycol and N-methylglutamine to the fomulation B-1 showed excellent capacity on the solubilization of talniflumate and the percentage was almost 2.0%. These results suggest that the microemulsion system may be promising for the solubility improvement of talniflumate.

4급 암모늄염을 함유한 마이크로에멀젼의 제조 및 안정성 (Preparation and Stability of Microemulsion Containing Quaternary Ammonium Salt)

  • 이장원;정노희
    • 한국응용과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.44-50
    • /
    • 2003
  • We studied on the preparation and evaluation of O/W type microemulsion containing "wax, liquid paraffine and quaternary ammonium salt". And also it was obtained to stability of microemulsions by mono ethylene glycol(MEG) addition. The microemulsions were generally prepared at 96${\sim}$97$^{\circ}C$ by the phase inversion method. We used polyoxyethylene(20) sorbitan monooleate(POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C.) as the emulsifiers at microemulsion preparation. From the results, we could get best condition for microemulsion preparation, in case of oil phase, montanic ester wax ; 1.1wt%, paraffine wax ; 1.1wt%, liquid paraffine ; 3.1wt%, propylene glycol ; 0.6wt% and ethylene glycol monobutyl ether ; 0.6wt%, when the ratio(wt%) of D.D.A.C. and POE(20)SMO were 2 : 3. And also we could obtained that the distributed particle size of the final microemulsions were about 8${\pm}$1.5nm and the mean particle size was 7${\pm}$0.5nm. We got following results from final microemulsions that the percent of transmittance; 96${\sim}$98% at 700nm. And the microemulsion blended with MEG of 5${\sim}$15wt% showed smaller particle size and more stable distribution than non-containing MEG.

마이크로에멀젼을 이용한 은 나노입자의 합성 (Synthesis of Silver Nanoparticles by Microemulsion)

  • 윤인영;박흥조;곽광수;정노희
    • 한국응용과학기술학회지
    • /
    • 제20권2호
    • /
    • pp.118-124
    • /
    • 2003
  • Silver nanoparticles was synthesized by the method of W/O microemulsions with AOT (bis(2-ethylhexyl) sodium sulfosuccinate). The nucleation particle growth and aggregation was controlled by the droplet exchange process. The intermicellar exchange reaction is varied by changing the AOT and the $H_2O$ concentration. The synthesized W/O microemulsions was found to give the nanoparticles, which was confirmed by SEM, TEM, particle-size-analyzer, and UV-spectrometer. The most stable particles was obtained at 0.056 mole AOT solution, and the particle size distribution was found in the range from 27 to 31 nm. The mean particle size was reduced by adding Tween 20 significantly, and distribution was found from 14 to 16 nm. And, It's size was reduced by cosurfactants as toluene and benzyl alcohol. In case of toluene and benzyl alcohol, the range of particle size was found 7${\sim}$11 nm and 8${\sim}$12 nm.