• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.6
• /
• pp.612-616
• /
• 1990

The addition of water into oil phase containing hydrophobic emulsifier while stirring forms W/O emulsions. When dispersed phase increase up to a certain extent, phase inversion into O/W emulsions occurs and just before phase inversion O/W/O emulsions exist in a mixed state with W/O emulsions. Thus this experiment was carried out to examine O/W/O emulsions formation in W/O emulsions. The viscosity of sample emulsions(water phase： $H_2O$, oil phase : TGCR-containing olive oil) was measured at the shear rate of 1.92 to 384 per second and at temperature of 25$\pm$0.1$^{\circ}C$, and the development of O/W/O emulsions evaluated from the difference between theoretical and measured values by substituting measured value for Mooney's equation. The formation of O/W/O emulsions tended to be high in sample emulsions just before phase inversion and increase with decreasing TGCR concentrations. This result suggests that high viscosity observed right before phase inversion may also be caused by the formation of O/W/O emulsions.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1611-1616
• /
• 2010

The purpose of this research was to determine the effect of surfactant micelles on lipid oxidation in W/O/W multiple emulsions. The content of ferric irons and hydroperoxide in the continuous phase in W/O/W multiple emulsions was measured as a function of Brij micelle. The concentration of ferric iron and hydroperoxide in the continuous phase increased with increased storage time (1~6 days). Lipid oxidation rates, as determined by the formation of lipid hydroperoxides, TBARs and headspace hexanal, in the W/O/W multiple emulsions containing ferric iron decreased when 3% surfactant micelles were exceeded. These results indicate that excess surfactant micelles could alter the physical location and prooxidant activity of iron in W/O/W multiple emulsions.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.221-230
• /
• 1984

In this study an investigation was made to determine optimum ratio between $SO_3$, MgO and $K_2O$ that maximizes $C_2S$ formation in Clinkering reaction Using response surface analysis method. It was proved that 1) Residual $K_2O$ int he clinker should be converted to $K_2SO_4$ because $K_2SO_4$ has less effect on the burnability than $K_2O$, 2) Optimum ratio if $SO_3$/K2O is 1.5, 3) Optimun balance between $CaSO_4$ and MgO is to be adjusted to such a level that w/o SO3=0.7(w/o MgO-2).4) In case of lack of $K_2O$ free CaO was minimized when $K_2SO_4$=2.3w/o and MgO=1.5w/o but if remaining $K_2O$ was 2w/o free CaI was minimized in the level that $K_2SO_4$=2.3w/o and MgO =1.5 w/o but if remaining $K_2O$ was 2 w/o free CaO was minimized in the level that $K_2SO_4$=4.5w/o and MgO =3.0 w/o.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.20 no.1
• /
• pp.64-81
• /
• 1994

O/W emulsions with mixed nonionic surfactants(polyoxyethylene(20)sorbitan monostearate/sorbitan sesquioleate), liquid paraffin, water prepared by direct inversion emulisification method and continuous inversion emulsification Method. The one-step, two-step and three-step phase inversion emulsification method were used in experiments. Effect of added water on droplet size of final O/W emulsions which is prepared by phase inversion emulsification method were investigated. In direct inversion emulsification method(two-step emulsification method), fine and homogeneous droplets of OIW emulsions were formed after phase inversion steps i.e. ,W/O - (W/O) If double emulsion - O/W emulsion. In continuous inversion emulsification method(three-step emulsification method), fine and homogeneous O/W emulsion were formed after phase inversion steps i.e., W/O - pseudomicroemulsion - O/W. By latter method, more Fine and homogenuous droplets were formed than former method. 10-10, 8 HLB region of mixed non-ionic surfactants could produce most fine droplets. This HLB region had maximum values of solubilization water and This HLB value of mixed nonionic surfactants produced fine and homogenuous droplets.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.303-313
• /
• 2015

Titrated extract of Centella asiatica (TECA), which is poorly soluble in water is well known for wound healing and anti wrinkle agent. This study was conducted to find the optimum condition for the preparation of water in oil in water ($W_1/O/W_2$) emulsion containing TECA. Solubility of TECA were measured by UV spectrophotometer. 2.55 g of TECA was dissolved in solution composed of dipropylene glycol (40.0 g), ethanol (20.0 g), and water (10.0 g). Factors affecting stability of the emulsions ($W_1/O$, $W_1/O/W_2$) was investigated. The optimum conditions for the preparation of $W_1/O$ emulsion was composed of dipropylene glycol : ethanol : water : TECA in a weight ratio of 40.0 : 20.0 : 10.0 : 2.5 for water phase and squalane : cetyl PEG/PPG-10/1 dimethicone : cetearyl alcohol in a weight ratio of 22.5 : 4.0 : 2.5 for oil phase. The optimum conditions for the preparation of $W_1/O/W_2$ multiple emulsion was composed of water : $W_1/O$ emulsion : polysorbate 80 : carbomer : triethanolamine in a weight ratio of 55.8 : 40.0 : 4.0 : 0.1 : 0.1.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.117-125
• /
• 1996

The variation of the interfacial and the electrical properties of SiO$_{2}$TiW layers as a function of anneal temperature was extensively investigated. During the deposition of SiO$_{2}$ on TiW chemical bonds such as SiO$_{2}$, TiW, WO$_{3}$, WO$_{2}$ TiO$_{2}$ Ti$_{2}$O$_{5}$ has been created at the SiO$_{2}$/TiW interface. At the anneal temperature of 300$^{\circ}C$, WO$_{3}$ and TiO$_{2}$ bonds started to break due to the reduction phenomena of W and Ti and simultaneously the metallic W and Ti bonds started to create. Above 500$^{\circ}C$, a part of Si-O bonds was broken and consequently Ti/W silicide was formed. Form the current-voltage characteristics of Al/Sico$_{2}$(220$\AA$)/TiW antifuse structure, it was found that the breakdown voltage of antifuse device wzas decreased with increasing annealing temperature for SiO$_{2}$(220$\AA$)/TiW layer. When r, the insulating property of antifuse device of the deterioration of intermetallic SiO$_{2}$ film, caused by the influw of Ti and W.W.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.753-759
• /
• 1999

The microstructure and electrical properties of ZNR that W $O_3$ is added in the range 0.5~4.0mol%, were investigated. The major part of W $O_3$ were segregated at the nodal point and W-rich phase was formed. Three crystalline phases, such as W-rich phase (W $O_3$), Bi-rich phase (B $i_2$W $O_{6}$ ), and spinel phase (Z $n_{2.33}$S $b_{0.67}$ $O_4$) were confirmed to be co-existed at the nodal point The average grain size increased in the range 15.5~29.9$\mu\textrm{m}$ with increasing W $O_3$ additive content. Consequently. W $O_3$ acted as a promotion additive of grain growth. As the W $O_3$ additive content increases. the varistor voltage and the nonlinear exponent decreased in the range 186.82~35.87V/mm and 20.90~3.34, respectively, and the leakage current increased in the range of 22.39~83.01 uh. With increasing W $O_3$ additive content, the barrier height and the density of interface states decreased in the range 1.93~0.43eV and (4.38~1.22)$\times$10$^{12}$ $\textrm{cm}^2$, respectively. W $O_3$ acted as an acceptor additive due to the donor concentration increasing in the range (1.06~0.38)$\times$10$^{18}$ /㎤with increasing W $O_3$ additive content.t.t.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.1-5
• /
• 1999

The bioavailabilities of baicalin in water, oil, w/o and o/w emulsion were evaluated in rats. The dissolution rate of baicalin in o/w emulsion was smaller than those of w/o form in dilute hydrochloric acid solution (pH 1.2) and in PBS (pH 6.8). The absorption rate of baicalin from w/o emulsion was smaller than that of o/w emulsion in the different parts of rat intestine of the rats. Following oral administration in rats, the $C_{max}$ of baicalin from water phase, oil phase, o/w wand w/o emulsion were 2.11, 0.61, 1.57, and $1.35\;{\mu}g/ml$, respectively. The relative bioavailability of w/o emusion was 129 % when it was compared with water phase. This result suggests that the improvement of bioavailability for baicalin in w/o emulsion might be practically available.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.24-38
• /
• 1997

Using the all-trans-retinol which is double-capsulated with matrix, we investigated its stability and the change of the epidermal thickness. The proprietary MDC comprise two steps of capsulation of retinol, i.e., primary microcapsulation with collagen and then secondary capsulation with gellan gum. We compared the activity of all-trans-retinol in various forms such as (1) simply in O/W, (2) in W/O emulsion, (3) in primary capsulted form in O/W emulsion, or (4) in MDC in O/W emulsion. After storage at 45$^{\circ}C$ for 4 weeks, retinol in MDC in O/W emulsion retained 92% of the activity compared to the standard material upon HPLC analysis, whereas the primary capsule gave 70%, the O/W emulsion form 47% and the W/O emulsion 78%. The retinol in MDC in O/W induced the siginificant increase in epidermal thickness compared to the vehicle.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.1-3
• /
• 1987

The crystal structure of $K_5Na_2[SbW_6O_{24}]{\cdot}12H_2O$ has been determined. Final R = 0.081 for 890 observed independent reflections collected by diffractometry. Crystal data as follows; trigonal, space group R3m, a = 9.794(1) ${\AA},\;{\alpha}$ = 84.72$(1)^{\circ}$, Z = 1. The heteropolyanion has a structure with point symmetry $D_{3d}$ (3m), of the ideal Anderson-type heteropolyanion. The Sb-W and W-W distances are 3.259(2) and 3.259(3) ${\AA}$. Three types of W-O ($W-O_t,\;W-O_b\;and\;W-O_c$) distances are 1.73(2), 1.95(4) and 2.20(3) ${\AA}$. The Sb-O distance is 1.97(3) ${\AA}$.