• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.975-990
• /
• 2011

In this study, to develop an assessment method for spatio-temporal riverbed changes, a 1-dimensional model (HEC-RAS) and a 2-dimensional model (CCHE2D) were built and applied. As for the analysis of a riverbed's long-term change in a real stream, three new assessment methods were developed, which are called the "Sediment section cumulative curve", "Sediment section moment", and "Sediment probability distribution function." These methods were used to assess the characteristics of riverbed changes using a consistent valuation standard and to understand changes in quantities intuitively. From the results of this study, sediment characteristics of cross sections can be detected effectively by applying the "Sediment section cumulative curve" method to determine whether there is any sedimentation or erosion in total emission. The amount of sedimentation or erosion occurring in the right or left banks, which divided by center column, could be presented as one criterion by applying the "Sediment section moment" method. This approach could be utilized as an indicator for sediment predictions. Spatio-temporal sediment variables can be presented quantitatively by determining the mean and uncertain boundaries through the "Sediment probability distribution function", and finally, the results can be illustrated for each cross section to provide intuitive recognition.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.439-439
• /
• 2011

최근 이상기후로 인해 세계의 기후, 날씨가 변화하는 추세이다. 이에 따라 한국, 프랑스, 미국 등 세계 각지에서 이상홍수 및 이상가뭄이 발생하고 이로 인한 재산 및 인명피해가 빈번한 현황이다. 따라서 전 세계적으로 기후변화를 고려하여 홍수피해를 저감하고자 많은 노력을 기울이고 있으며, 그러한 방법 중에서도 특히 설계 또는 계획수립 시에 많이 사용되는 방식으로 수치해석 및 수리실험 방법을 들 수 있다. 특히, 수치해석은 수리실험에 비해 비교적 짧은 시간과 경제적인 장점이 있으므로 많이 이용되는 방법 중의 하나이다. 따라서 본 연구에서는 수치해석을 통해 프랑스 남부에 위치한 니스 지역 Var강의 역사상 가장 큰 실강우에 대하여 다양한 방식의 수치해석을 수행하고 수위 관측지점의 수위자료와 비교분석하고자 한다. 본 연구에서는 대상지역을 프랑스 남부에 위치한 니스지역의 Var강으로 선정하였다. 이 지역은 지중해성 기후에 속해 건조하고 따뜻한 날씨였지만 최근 이상기후로 인해 잦은 강우와 홍수 등이 발생하고 있다. 가장 심한 피해가 발생했던 1994년 11월에 발생한 폭우로 인하여 최대 유량이 $3,500m^3/s$까지 관측 되었으며 이는 평균 유량인 $50~100m^3/s$의 35~70배에 달하는 유량이다. 이 홍수로 인해 Var강 유역의 많은 지역이 물에 잠기고 2개의 수중구조물이 파괴되는 등 많은 피해가 발생하였다. 본 연구에서 사용된 수치모형은 미 공병단의 HEC-HMS와 상용 프로그램인 MIKE11과 ISIS이다. MIKE11과 ISIS는 1차원 수리분석모형 프로그램으로써 흐름, 속도, 유량, 수질, 유사이동 등 개수로에서 여러 수리학적 현상을 분석할 수 있는 프로그램이다. 실제 수위자료와 수치모의를 통한 결과값의 비교를 위해 GIS를 통해 얻은 유출계수, 유로경사, 소유역 분할 등을 이용하고 역사상 가장 크게 발생한 1994년의 실강우 이용하여 HEC-HMS을 통해 수문곡선을 작성한 후 동일한 매개변수를 이용하고 검 보정을 통해 MIKE11과 ISIS를 이용하여 수치모의를 실시하였고 실제 수위자료와 프로그램 MIKE11와 ISIS의 결과값을 분석 및 비교하였다. Var강 유역에서 수치모의를 한 결과, 각 프로그램을 사용한 결과값은 실제 수위자료와 비슷한 경향을 보였으며 또한 동일한 매개변수를 이용하였을 때 각 프로그램을 사용한 결과값도 유사한 경향을 보였다. 검 보정을 실시 한 후 ISIS의 결과값이 실제 수위자료와 더 흡사한 것으로 나타났다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.21-35
• /
• 2002

Nowadays, in accordance with increasing expectations of multimedia stream service on the internet, a lot of distributed applications are being required and developed. But the models of the existing systems have the problems that cannot support the extensibility and the reusability, when the QoS relating functions are being developed as an integrated modules which are suited on the centralized controlled specific-purpose application services. To cope with these problems, it is suggested in this paper to a distributed QoS management system on CORBA, an object-oriented middleware compliance. This systems we suggested can provides not only for efficient control of resources, various service QoS, and QoS control functions as the existing functions, but also QoS control real-time negotiation and dynamic adaptation in addition. This system consists of QoS Control Management Module(QoS CMM) in client side and QoS Management Module(QoS MM) in server side, respectively. These distributed modules are interfacing with each other via CORBA on different systems for distributed QoS management while serving distributed streaming applications. In phase of design of our system, we use UML(Unified Modeling Language) for designing each component in modules, their method calls and various detailed functions for controlling QoS of stream services. For implementation of our system, we used OrbixWeb 3.1c following CORBA specification on Solaris 2.5/2.7, Java language, Java Media Framework API 2.0 beta2, Mini-SQL 1.0.16 and the multimedia equipments, such as SunVideoPlus/Sun Video capture board and Sun Camera. Finally, we showed a numerical data controlled by real-time negotiation and adaptation procedures based on QoS map information to GUIs on client and server dynamically, while our distributed QoS management system is executing a given streaming service.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.283-294
• /
• 2018

An accurate pedestrian-delay model is essential for the pedestrian-oriented evaluation of signalized intersection (SI). The crossing behaviors of pedestrians at signalized pedestrian crosswalks (SPCs) are various, and their arrival behaviors consist of two types, random and platoon. It is natural, hence, that the behaviors of pedestrian crossing and arrival should be considered in order to estimate accurate pedestrian delay. Despite this necessity, a simple pedestrian-delay model that cannot explain these behaviors of pedestrian movements is still recommended in Highway Capacity Manual (HCM). For these reasons, a pedestrian-delay model, suitable for various SPCs and SIs, is required to make pedestrian-oriented decisions on the design and operation of various SPCs and SIs. This paper proposes a novel pedestrian-delay model that is based on the behaviors of pedestrian crossing and arrival. The proposed model consists of two sub models: the one for SPC and the other for SI. The SPC delay model was developed based on the behaviors of pedestrian crossing during pedestrian green time. The SI delay model was designed based on the behaviors of pedestrian crossing and platoon arrival. The results of a numerical simulation showed that the proposed delay model can successfully overcome the under- and overestimation problems of the HCM model with explaining various behaviors of pedestrian crossing and arrival.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.67-80
• /
• 2014

Long-term stability and delayed failure of granite were evaluated through the laboratory test based on Wilkins method and Brazilian disc test (BDT) which yields tensile strength, mode I fracture toughness and subcritical crack growth parameters. Then, the long-term strength of granite was estimated by using analytical models and long-term stability of compressed air-energy storage (CAES) pilot cavern pressurized up to 5 ~ 6 MPa was evaluated using numerical code, FRACOD with the determined subcritical crack growth parameters. The results of test and analyses showed that the subcritical crack growth index, n was determined as 29.39 and the inner pressure of 5 ~ 6 MPa had an insignificant effect on the long-term stability of pilot cavern. It was also found that the measurement and analysis of acoustic emission events can describe the accumulation of damage due to subcritical crack growth quantitatively. That is, AE monitoring can provide the current status of rock under loading if we make an identical installation condition in the field with that of the laboratory test.

• Tunnel and Underground Space
• /
• v.25 no.2
• /
• pp.186-198
• /
• 2015

This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow. The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the ventilation evaluation on J coal mine is carried out and the effect of a length of the tunnel on the temperature to enhance the ventilation efficiency in the subsurface is numerically analyzed. The analysis shows that J coal mine needs $17,831m^3/min$ for in-flow ventilation rate but the total input air flowrate is $16,474m^3/min$, $1,357m^3/min$ of in-flow ventilation rate shortage. The temperatures were predicted on the two developed models of J mine, and VnetPC that is a numerical program for the flowrate prediction. The result of the simulation notices the temperature in the case of developing all 4 areas of -425ML as a first model is predicted 29.30 at the main gangway 9X of C section and in the case of developing 3 areas of -425ML excepting A area as a second model, it is predicted 27.45 Celsius degrees.

• The Journal of Engineering Geology
• /
• v.21 no.2
• /
• pp.147-156
• /
• 2011

We conducted laboratory experiments to determine the physical and mechanical properties, and the failure behaviors, of cements for use as grouting material in a $CO_2$-injection borehole. Samples with lour different ratios of water to cement mass (0.4, 1, 2, and 3) were tested. The analyzed properties (porosity, sonic velocity, modulus, and compressive and tensile strengths) varied systematically as a function of the ratio of water to cement (w/c), showing a sharp change between w/c ratios of 0.4 and 1. Triaxial compression tests revealed a clear boundary between brittle and ductile failure depending on the w/c ratio and confining pressure. The present results can be utilized as input parameters for numerical models to understand the initial deformation and failure behavior of grouting cements in a $CO_2$-injection borehole.

• Korean journal of food and cookery science
• /
• v.31 no.4
• /
• pp.395-404
• /
• 2015

The aims of this study were to determine the optimal mixing condition for two different amounts of Gynura procumbens powder and olive oil for the preparation of beef sausage. The experiments were designed according to the central composite design of response surface methodology, which showed 10 experimental points including two replicates of Gynura procumbens powder and olive oil. The physicochemical and mechanical characteristics as well as the sensory properties were measured, and these values were applied to the mathematical optimization models. The results of the physiochemical and mechanical analysis of each sample, including chewiness, cohesiveness, color a, color b, moisture content, salinity and heating loss showed significant differences. The sensory measurements were significantly different in color, flavor, tenderness, texture and overall quality. The optimum formulation, which was calculated using the numerical and graphical method, was determined to be 2.1 g Gynura procumbens powder and 7.06 g of olive oil.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.707-716
• /
• 2010

Germinated brown rice is a useful material that contains natural nutrients and biologically active substances. This study was conducted to develop a optimal composite recipe for functional germinated brown rice cookie with added spinach (spinacia oleracea L) powder and with high preference in all age groups. The experimental design utilized herein was based on the Central composite design methodology of response surface, which included 16 experimental points, including 2 replicates for spinach, sugar, and butter. The physical, mechanical, and sensory properties of the test were measured, and these values were applied to the mathematical models. A canonical form and perturbation plot showed the influence of each ingredient on the mixed final product. The results of spread ratio decreased significantly with increases in spinach powder, sugar, and butter(p<0.01). L value shows that lightness decreased significantly with an increase in sugar(p<0.05), but the a and b values were not significant. Sensory evaluation found significant values for color(p<0.05), flavor(p<0.05), texture(p<0.05) and overall quality(p<0.05) in the predicted model. The optimum formulation by the numerical and graphical methods was calculated as follows: spinach powder 3 g, sugar 35.5 g butter 54.4 g.

• Journal of Wetlands Research
• /
• v.13 no.2
• /
• pp.329-341
• /
• 2011

This study was conducted with the national river, Munsancheon, which is located in Paju-si, Gyeonggi-do. The sediment discharge of Munsancheon was directly measured to analyze the sediment characteristics, and the results were used in the numerical model to predict the long-term river bed variation. The flow-total sediment discharge relation was derived using the measured total sediment discharge, and the results were compared with the total sediment discharge that was calculated using the existing prediction formula to derive a proper sediment discharge prediction method. In the actual measurements, the total annual sediment discharge was 5,478 ton/year, and the specific sediment discharge was 29.23 ton/$km^2$/year. The Ackers & White formula resulted in the values very close to the actual measurements. With the actual sediment discharge, geographical and hydrologic data as the input variables, HEC-6 and GSTARS models were comparatively analyzed. The test results showed that the HEC-6 model is suitable for the reliable prediction of the long-term river bed variation. Accordingly, the model was used for the long-term river bed variation prediction in this study. In the case of Munsancheon, deposition was continued in the downstream area and erosion occurred in the upstream area on the whole. It was expected that the stream would be stabilized in the river bed condition of 20 years later. The river bed variation was within 1 m, which was at the significance level. In the downstream area that is influenced by tide, however, the accumulation was continuously increasing within the section 2,000-7,000 m from the outlet. It seems that this should be considered in establishing the river management plans.