• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.495-503
• /
• 2012

It is necessary to perform the precise analysis of unsteady flow for effective design of the side-weir detention basin installed in the river. Generally, the HEC-RAS program, which is a 1D unsteady numerical model, is mostly used to simulate the unsteady flow for rivers. However, it is difficult to have confidence of unsteady flow results simulated by HEC-RAS due to the lack of experimental data and field monitoring data for the channel with a side-weir detention basin. Therefore, the purpose of this study is to validate or verify the simulation results calculated by HEC-RAS through the experiments for the open channel with a side-weir detention basin using specially-designed unsteady discharge-supply system. The experimental cases included unsteady flows in the straight channel with and without a side-weir detention basin. Especially, for the case with a detention basin, the experiment was performed to consider only the free flow condition over the side-weir. The study results showed that values of water level and discharge obtained from HEC-RAS coincided reasonably with experimental results with the maximum error of 3% for water level and 1% for discharge in the case of the flow without the side-weir detention basin and 4% for water level and 2% for discharge with the side-weir detention basin.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.34-42
• /
• 2011

It's been reported that the global warming effect has invoked the ever increasing typhoon intensity and long-term sea level rise which jointly cause severe wave overtopping over breakwaters or shore dykes. A simple measure to cope with this undesirable change may be just to increase the crest height of the dykes and breakwaters. This is surely effective to prevent wave overtopping, but it also decreases the seaward visibility of coastal waterfront. In this paper, a dynamic deformable rubber membrane parapet which not only reduces wave overtopping in storm period but also secures seascapes in normal days is presented. Several optimal configurations of the parapet are proposed. Through numerical analyses using a nonlinear finite element model and hydraulic experiments, the air controlled expansion and contraction of the parapets, their behavior against wave overtopping and structural stability are investigated.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.7-17
• /
• 2011

We have developed an inversion code for three-dimensional (3D) resistivity tomography including the anisotropy effect. The algorithm is based on the finite element approximations for the forward modelling and Active Constraint Balancing method is adopted to enhance the resolving power of the smoothness constraint least-squares inversion. Using numerical experiments, we have shown that anisotropic inversion is viable to get an accurate image of the subsurface when the subsurface shows strong electrical anisotropy. Moreover, anisotropy can be used as additional information in the interpretation of subsurface. This algorithm was also applied to the field dataset acquired in the abandoned old mine area, where a high-rise apartment block has been built up over a mining tunnel. The main purpose of the investigation was to evaluate the safety analysis of the building due to old mining activities. Strong electrical anisotropy has been observed and it was proven to be caused by geological setting of the site. To handle the anisotropy problem, field data were inverted by a 3D anisotropic tomography algorithm and we could obtain 3D subsurface images, which matches well with geology mapping observations. The inversion results have been used to provide the subsurface model for the safety analysis in rock engineering and we could assure the residents that the apartment has no problem in its safety after the completion of investigation works.

• Journal of Nutrition and Health
• /
• v.30 no.1
• /
• pp.100-108
• /
• 1997

Our current food hygiene law mandates nutrition label (NL) for the special nutrition foods, health support foods, instant foods, and foods with certain nutrient emphasized note, only. Currently more processed foods are bearing nutrition labels though the format is quite inconsistant. This study examined the status on current nutrition labeling practices for the processed foods that are retailed in the supermarket. The obtained information was assessed in the aspects of numerical data presentation on nutrients content, descriptive terms, health claim, and the format. The results are summarized as follows. 1) Foods with NL are limited to the food category specified by current hygiene law while voluntary nutition labeling is few. 2) Descriptive terms such as free, low, and sufficient are not substantiated with quantitative data. The efficacy of microelements which has not been clalified yet are overemphasized but major nutrients are ignored. 3) The regulations for the descriptive terms are set on the base of the nutrient content per 100g or 100ml under current nutrition labeling act. It would mislead consumers thus the definition for these descriptor be better set on the unit of the amount of food customary eaten at one time. For this the standard serving size should be set officially. 4) Quantitative nutrition information given on food products is difficult to compare because of the lack in formality. The title of NL, load and kinds of nutritents, order of nutrients listed, the unit of expression, RDA comparision, and reference RDA are inconsistant among the foods similar in dietary property. Uniform format is needed to give NL the credibility and usefulness. Proividing nutrition information to the consumers with NL is a worldwide practice though its efficacy has been controversial. Under newly legistered health promotion law in Korean nutrition education is esxpected to take part in to improve national nutrition condition and NL would education is expected to take part in to improve national nutrition condition and NL would be a potent tool for public nutritions education. It appears to be the time to mandate NL to all the processed foods in the market. The result of present study would initiate further consumer experiments related to NL. Various interest groups such as food and nutrition professions, public health organizations, government regulatory agencies, food producers and marketers, and consumer groups need to particepate and communicate for the legislation of NL and the development of NL format.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.645-653
• /
• 2014

P-value is the probability of observing a current sample and possibly other samples departing equally or more extremely from the null hypothesis toward postulated alternative hypothesis. When p-value is less than a certain level called ${\alpha}$(= 0:05), researchers claim that the alternative hypothesis is supported empirically. Unfortunately, some findings discovered in that way are not reproducible, partly because the p-value itself is a statistic vulnerable to random variation. Boos and Stefanski (2011) suggests calculating the upper limit of p-value in hypothesis testing, using a bootstrap predictive distribution. To determine the sample size of a replication study, this study proposes thought experiments by simulating boosted bootstrap samples of different sizes from given observations. The method is illustrated for the cases of two-group comparison and multiple linear regression. This study also addresses the reproducibility of the points in the given 95% confidence interval. Numerical examples show that the center point is covered by 95% confidence intervals generated from bootstrap resamples. However, end points are covered with a 50% chance. Hence this study draws the graph of the reproducibility rate for each parameter in the confidence interval.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.186-194
• /
• 2000

In this study, the oceanic responses to given atmospheric boundary conditions are investigated using a mesoscale ocean circulation model. The numerical experiments are divided into two parts: One is, so called, spin-up experiment and the other is reproduction experiment. The spin-up experiment simulates climatic state of ocean by integrating the ocean model with upper boundary conditions of the monthly mean atmospheric climate data. In the reproduction experiment, for the reproduction of major oceanic changes around Korean Peninsula during the period of 1980-1998 (19 years), the model has been integrated under the boundary condition of the 19year monthly mean atmosphere data. The spined-up state of ocean generated from the spin-up experiment is assigned to the initial boundary condition of the reproduction experiment. In the spin-up experiment, the model properly simulates the major features of circulation structure around Korean Peninsula; such as separation of East Korean Warm Current (EKWC), formation of the polar front, cold water band associated with the small scale eddies in the East Sea, the formation of front along west coast, and the seasonal variation of circulation pattern caused by changing upwind current in the West Sea. In the reproduction experiment, the model has shown the interannual sea surface temperature variations and a warming trend of about 0.5$^{\circ}$C during the period around Korean Peninsula, as in the case of the observation. Therefore, it is concluded that the model is capable of simulating not only the mean states but also the variabilities of ocean under the given atmosphere boundary conditions.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.429-438
• /
• 2017

Monte Carlo N-Particle (MCNP) modeling algorithm based on the Monte Carlo method was used to perform the simulation of neutron logging in order to increase the reliability and utilization of neutron logs applied in geological and resource engineering fields. To perform the simulation using MCNP, we used a realistic three-dimensional configuration of neutron sonde and formation. Validation of the modeling was confirmed by comparing the calibration curves of sonde manufacture with those calculated by MCNP modeling. After the validation, lithology effects, pore fluid effects, borehole diameter change, casing effect, and effects of borehole water level were investigated through modeling experiments. Numerical tests indicate that changes in neutron count ratio according to the lithology were quantitatively understood. In case of a borehole with a diameter of 3 inches, ratio of counting rates was higher than expected to be interpreted as borehole fluid has small effects on neutron logging. Effect of casing was also small in general, particular when porosity increases. Since modeling results above the groundwater level showed a tendency opposite to those below the groundwater level, neutron logs can be used to detect groundwater level. The modeling results simulated in this study for various borehole environments are expected to be used for data processing and interpretation of neutron log.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.213-218
• /
• 2009

Electrowinning process recovers uranium with actinide elements from spent fuels and is a key step in the Pyroprocessing because of proliferation resistance. An analysis of heat transfer of the Electrowinning cell was conducted to develop basic tool for designing engineering-scale Electrowinner. For the calculation of the heat transfer, ANSYS CFX commercial code was adapted. As a result of the calculation, the vertical Heating Zone length had great effect upon temperature of LiCl-KCl eutectic salt. To maintain constant temperature in the salt, the Heating Zone length should be three times longer than the height of the salt. However, the argon and salt temperatures were barely affected by the Cooling Zone length. The temperature under the Cell cover was mainly influenced by the number of the cooling plates. When the cooling plates were installed more than the number of 5, temperature under the cover was maintained below $250^{\circ}C$. These temperature properties had similar tendency toward the temperature of the Cell which was measured from experiments, Simulated heat transfer information from this study could be used to design engineering-scale Electrowinner.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.537-544
• /
• 2017

An experimental study was carried out to investigate the characteristics of the propagation distance of a flood wave considering the levee failure speed in a flat inundation area. The Ritter solution for one dimensional flow was considered to formulate the experimental results and a representative form with coefficients of k and m, which consider the three dimensional flow characteristics, was applied. The experiments showed that the propagation velocity of the wave front in the inundation area was influenced by the levee breach speed as well as the initial water level, which is a significant variable representing the flood wave behavior. In addition, coefficients k and m are not constants, but variables that vary with levee breach speed. An empirical formula was also suggested using the experimental results in the form of the relationships between k and m. In this study, a large-scale experiment for flood inundation was carried out to examine the behavior of flooding in the inundated area and the relationships between the levee breach speed and wave-front propagation velocity were suggested based on the experimental results. These research results are expected to be used as the baseline data to draw a flow inundation map, establish an emergency action plan, and verify the two-dimensional numerical model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.510-517
• /
• 2016

Supersonic jet technology using high pressures has been popularly utilized in diverse industrial and engineering areas related to working fluids. In this study, to consider the effects of a shock wave caused by supersonic jet flow from a high pressure pipe, the SST turbulent flow model provided in the ANSYS FLUENT v.16 was applied and the flow characteristics of the pressure ratio and Mach number were analyzed in accordance with the working fluids (air, oxygen, and hydrogen). Before carrying out CFD (Computational Fluid Dynamics) analysis, it was presumed that the inlet gas temperature was 300 K and pressure ratio was 5 : 1 as the boundary conditions. The density function was derived from the ideal gas law and the viscosity function was derived from Sutherland viscosity law. The pressure ratio along the ejection distance decreased more in the lower density working fluids. In the case of the higher density working fluids, however, the Mach number was lower. This shows that the density of the working fluids has a considerable effect on the shock wave. Therefore, the reliability of the analysis results were improved by experiments and CFD analysis showed that supersonic jet flow affects the shock wave by changing shape and diameter of the jet, pressure ratio, etc. according to working fluids.