• Computers and Concrete
• /
• 제17권3호
• /
• pp.305-322
• /
• 2016

The work is intended to demonstrate that the loss of bond between concrete and flexural steel which led in recent years a number of flat-slab structures to punching collapse under service loading conditions is also relevant to ultimate limit-state design. It is based on a comparative study of the results obtained from numerical experiments on flat slab-column sub-assemblages. The slabs were designed for punching either in compliance with the EC2 code requirements, which do not allow for such loss of bond, or in accordance with the compressive force-path method which considers the loss of bond between concrete and the flexural reinforcement in tension as the primary cause of punching. The numerical experiments are carried out through the use of a nonlinear finite element analysis package for which, although ample published evidence of its validity exists, additional proof of its suitability for the purposes of the present work is presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.529-531
• /
• 2009

To construct the wind map for mainland Korea, the well designed atmospheric numerical modeling system was used. Three nest domains were construced with spatial resolutions between $10{\times}10km$ up to the hightest resolution of $1{\times}1km$. Parameterization schemes like MRF(PBL), RRTM(radiation), Grell(cumulus) were chosen since wind data simulated is in better agreement with the observed wind data. High-resolution atmospheric numerical model was applied to simulate the motion of the atmosphere and to produce the wind map around the South Korea. The results of several simulations were improved compare to the past system, because of using the fine geographical data, such as terrain height and land-use data, and the meteorological data assimilation.

• Structural Engineering and Mechanics
• /
• 제2권3호
• /
• pp.295-309
• /
• 1994

The present paper concerns the mathematical study and the numerical treatment of the problem of semirigid connections in bolted steel column base plates by taking into account the possibility of appearance of separation phenomena on the contact surface under certain loading conditions. In order to obtain a convenient discrete form to simulate the structural behaviour of a steel column base plate, the continuous contact problem is first formulated as a variational inequality problem or, equivalently, as a quadratic programming problem. By applying an appropriate finite element scheme, the discrete problem is formulated as a quadratic optimization problem which expresses, from the standpoint of Mechanics, the principle of minimum potential energy of the semirigid connection at the state of equilibrium. For the numerical treatment of this problem, two effective and easy-to-use solution strategies based on quadratic optimization algorithms are proposed. This technique is illustrated by means of a numerical application.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.143-163
• /
• 2017

This paper presents a non-destructive testing method for estimating the structural response of cable-stayed footbridges. The approach combines field measurements with a numerical static analysis of the structure. When the experimental information concerning the structure deformations is coupled with the numerical data on the structural response, it is possible to calculate the static forces and the design tension resistance in selected structural elements, and as a result, assess the condition of the entire structure. The paper discusses the method assumptions and provides an example of the use of the procedure to assess the load-carrying capacity of a real steel footbridge. The proposed method can be employed to assess cable-stayed structures including those made of other materials, e.g., concrete, timber or composites.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.528-531
• /
• 2004

For a simple one-dimensional ignition problem a mathematical model is described to investigate the difficulties in numerical simulations. Some computation results are obtained and comparison is made with analytical solution. Discussions are made on topics such as 1) coordinate transformation, 2) gas-phase and solid-phase analysis; (divergence form of the governing system, a finite-volume discretization, implicit time integration, upwind split flux, spatial accuracy improvement are described. Mass, reagent mass, and energy conservations are solved.), and 3) method to determine quantities on the burning surface (matching). Results obtained for small values of the non-dimensional pressure show a steady-combustion and good agreement with the analytical solution. Numerical instability appeared for larger values of the pressure, discussion on the cause of the problem is made. This effort is a part of a study of flame spread phenomena on solid propellant surface.

• 환경영향평가
• /
• 제8권3호
• /
• pp.49-59
• /
• 1999

In this study, we individualize the clauses to sort out the troubled ones, draw up a interrelation model in order to visually organize the relations, and finally, suggest the desirable application idea. The interrelation model suggested in this study has been made based on the matrix method. On this matrix, we arranged the environmental factors on horizontal and vertical axis, and when we describe the relation of each factors, we set the horizontal axis as the base and divided the content into three grades : Fine, Medium, and Poor. In addition to that, we expressed those three grades into numerical value like 3 points for Level Fine, 2 points for Level Medium, and 1 point for Level Poor and then, we converted this numerical values into index numbers. We could classify the index numbers such as AS, PS, Q-index, P-index. AS is an index numerically shows the degree of giving environmental effect, PS is an index numerically shows the degree of receiving environmental effect, Q-index is an index shows the aggravate degree, and P-index shows the relation degree. The Q/P-index with large numbers has considerable effect on the environmental system, while the small numbered Q/P-index barely effect on the environmental system. Moreover, we classified the environmental factors into 5 levels(I~V) according to the relations between the Q-index and P-index. Level I is less affected by the environment and has more giving effect, while Level V is more sensitively affected by the environment and has more receiving effect, which we considered important. Therefore, we could come up with the result that if we consider the each level of factors when we evaluate the EIA, the result would be far more accurate and reliable since it contains mutual relation aspect of EIA. The suggested interrelation model in this thesis is presentable as one of those scoping system. We highly believe the need of scoping system in EIA and suggest the interrelation model as the alternative idea for scoping system.

• 터널과지하공간
• /
• 제26권6호
• /
• pp.484-492
• /
• 2016

본 연구에서는 ${\bigcirc}{\bigcirc}$광산의 지반 안정성 평가를 위한 수치해석적 연구를 수행하였으며 해석에 고려된 침하의 인자들은 다음과 같다. 첫 번째로 손상대에 의한 암반의 물성 열화, 두 번째로 현장계측자료에 의한 국내 평균 측압계수 적용, 세 번째는 해당 광산의 실제 채광이력 조사, 네 번째는 채광 후 채굴적 주변 암반의 붕락을 가정하여 붕락된 암반을 추가로 굴착하는 해석기법이다. ${\bigcirc}{\bigcirc}$광산에서 실제 침하가 발생한 단면(5+10)을 대상으로 이 기법들을 적용하고 그 적용성을 확인하였으며, 침하가 발생하지 않았으나 침하가 우려되는 단면(3+10)을 대상으로 이 기법들을 또한 적용하고 지반 안정성을 평가하였다. 5+10 단면에서 추가 붕락을 통해 지표 최대변위가 41 mm 증가하여 46 mm가 나타났으며 추가 붕락에 따라 최대변위 위치가 실제 침하범위로 변화하는 양상을 확인하였다. 3+10 단면의 해석결과는 추가 붕락으로 5 mm 증가하여 7 mm의 지표 최대 변위가 발생하고 파괴영역이 채굴적 천단부에서 지표로 이어지지 않아 침하 가능성이 낮게 판단되었다.

• Advances in Computational Design
• /
• 제3권4호
• /
• pp.367-384
• /
• 2018

The consideration of constructability issues at the design stage can lead to improved construction performance with smooth project delivery and savings in time and money. Empirical studies demonstrate the value obtained by integrating construction knowledge with the building design process, and its benefits for owners, contractors and designers. However, it is still a challenge to implement the concept into current design practice. There is a need for a decision support tool to aid designers in reviewing their design constructability, deploying current technological tools, such as BIM. Such tools are beneficial at the conceptual design stage when there is a room to improve the design significantly with less incurred cost. This research investigates how current process- and object-oriented models can be used to assess design constructability. It proposes a BIM-based model using embedded information within the design environment to conduct the assessment. The modelling framework is demonstrated in four key parts; namely, the conceptual design model, the constructability assessment model, the assessment process model and the decision-making phase. Each is associated with a set of components and functions that contribute towards the targeted constructability assessment outcomes. The proposed framework is the first to combine a numerical assessment system and a rule-based system, allowing for both quantitative and qualitative approaches. The modelling framework and its implementation through a prototype are described in this paper. It is believed that this framework is the first to enable users to transfer their construction knowledge and experience directly into a design platform linked to BIM models. The assessment criteria can be customised by the users who can reflect their own constructability preferences into various specialised profiles that can be added to the constructability assessment model. It also allows for the integration of the assessment process with the design phase, facilitating the optimisation of constructability performance from the early design stage.

• Geomechanics and Engineering
• /
• 제3권3호
• /
• pp.169-188
• /
• 2011

Response of buried flexible pipe-soil system is studied, through numerical analysis, with respect to deflection and buckling in a spatially varying soil media. In numerical modeling procedure, soil parameters are modeled as two-dimensional non-Gaussian homogeneous random field using Cholesky decomposition technique. Numerical analysis is performed using random field theory combined with finite difference numerical code FLAC 5.0 (2D). Monte Carlo simulations are performed to obtain the statistics, i.e., mean and variance of deflection and circumferential (buckling) stresses of buried flexible pipe-soil system in a spatially varying soil media. Results are compared and discussed in the light of available analytical solutions as well as conventional numerical procedures in which soil parameters are considered as uniformly constant. The statistical information obtained from Monte Carlo simulations is further utilized for the reliability analysis of buried flexible pipe-soil system with respect to deflection and buckling. The results of the reliability analysis clearly demonstrate the influence of extent of variation and spatial correlation structure of soil parameters on the performance assessment of buried flexible pipe-soil systems, which is not well captured in conventional procedures.

• Advances in Energy Research
• /
• 제5권3호
• /
• pp.255-275
• /
• 2017

The advantages of using natural circulation (NC) as a cooling system, has prompted the worldwide development to investigate this phenomenon more than before. The interesting application of the NC in low power experimental facilities and research reactors, highlights the obligation of study in these laminar flows. The inherent oscillations of NC between hot source and cold sink in low Grashof numbers necessitates stability analysis of cooling flow with experimental or numerical schemes. For this type of analysis, numerical methods could be implemented to desired mass, momentum and energy equations as an efficient instrument for predicting the behavior of the flow field. In this work, using the explicit, implicit and Crank-Nicolson methods, the fluid flow parameters in a natural circulation experimental test loop are obtained and the sensitivity of solving approaches are discussed. In this way, at first, the steady state and transient results from explicit are obtained and compared with experimental data. The implicit and crank-Nicolson scheme is investigated in next steps and in subsequent this research is focused on the numerical aspects of instability prediction for these schemes. In the following, the assessment of the flow behavior with coarse and fine mesh sizes and time-steps has been reported and the numerical schemes convergence are compared. For more detail research, the natural circulation of fluid was modeled by ANSYS-CFX software and results for the experimental loop are shown. Finally, the stability map for rectangular closed loop was obtained with employing the Nyquist criterion.