• Geomechanics and Engineering
• /
• v.14 no.3
• /
• pp.293-299
• /
• 2018

This paper has the aim of estimating the applicability of a numerical approach to the Hyperstatic Reaction Method (HRM) for the analysis of segmental tunnel linings. For this purpose, a simplified three-dimensional (3D) numerical model, using the $FLAC^{3D}$ finite difference software, has been developed, which allows analysing in a rigorous way the effect of the lining segmentation on the overall behaviour of the lining. Comparisons between the results obtained with the HRM and those determined by means of the simplified 3D numerical model show that the proposed HRM method can be used to investigate the behaviour of a segmental tunnel lining.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.127-134
• /
• 2009

In this paper, an numerical approach is performed to investigate the effects of smear zone, occurred by penetrating vertical drains, on consolidation behavior of soft clay deposits. Such a numerical analysis is applied to the field condition to confirm its applicability. Parametric numerical analyses is carried out to study influencing factors such as permeability in smear zone, boundary of smear zone and discharge capacity of vertical drains on the consolidation of soil. As results of analyses, for the given conditions of soil, degree of consolidation is getting faster with increase of permeability of vertical drain. Degree of consolidation is delayed with decrease of permeability of smear zone. As the ratio of drain width to smear zone increases, the degree of consolidation decreases. Proposed values of influencing factors by previous researchers is found to be reliable from results of numerical analyses with Cam-clay model.

• Structural Engineering and Mechanics
• /
• v.7 no.2
• /
• pp.127-145
• /
• 1999

This paper deals with the development of an approach for evaluating the squash load and rigidity of unprotected concrete filled steel columns at elevated temperatures. The current approach of evaluating these properties is reviewed. It is shown that with a non-uniform temperature distribution, over the composite cross-section, the calculations for the squash load and rigidity are tedious in the current method. A simplified approach is proposed to evaluate the temperature distribution, squash load, and rigidity of composite columns. This approach is based on the model in Eurocode 4 and can conveniently be used to calculate the resistance to axial compression of a concrete filled steel column for any fire resistance time. The accuracy of the proposed approach is assessed by comparing the predicted strengths against the results of fire tests on concrete filled circular and square steel columns. The applicability of the proposed approach to a design situation is illustrated through a numerical example.

• Language and Information
• /
• v.14 no.2
• /
• pp.159-181
• /
• 2010

This paper presents a hybrid approach to the sentiment analysis of online texts. The sentiment of a text refers to the feelings that the author of a text has towards a certain topic. Many existing approaches employ either a pattern-based approach or a machine learning based approach. The former shows relatively high precision in classifying the sentiments, but suffers from the data sparseness problem, i.e. the lack of patterns. The latter approach shows relatively lower precision, but 100% recall. The approach presented in the current work adopts the merits of both approaches. It combines the pattern-based approach with the machine learning based approach, so that the relatively high precision and high recall can be maintained. Our experiment shows that the hybrid approach improves the F-measure score for more than 50% in comparison with the pattern-based approach and for around 1% comparing with the machine learning based approach. The numerical improvement from the machine learning based approach might not seem to be quite encouraging, but the fact that in the current approach not only the sentiment or the polarity information of sentences but also the additional information such as target of sentiments can be classified makes the current approach promising.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.83-92
• /
• 2007

There are many numerical methods to solve large-scale fluid-structure interaction(FSI) problems. However, these methods require very fine mesh to achieve the reasonable numerical accuracy and stability due to the concentrated and volatile hydrodynamic pressure caused by the liquid sloshing. Consequently, the numerical analysis targeting for the long-period time response with the desired numerical accuracy Is very highly time-consuming. The aim of this paper is to suggest a new method to analyze the hydroelastic behavior of the LNGC containment by using the global-local numerical approach. The reliability of the presented method is firstly examined, and then its efficiency is demonstrated by presenting that the long-period local responses of the LNGC containment are obtained with relatively short CPU time.

• Structural Engineering and Mechanics
• /
• v.32 no.2
• /
• pp.251-267
• /
• 2009

Reinforced concrete (RC) structures consist of two different materials: concrete and steel bar. The stress transfer behaviour between the two materials through bond plays an important role in the load-carrying capacity of RC structures, especially when they subject to lateral load such as blast and seismic load. Therefore, bond and slip between concrete and reinforcement bar will affect the response of RC structures under such loads. However, in most numerical analyses of blast-induced structural responses, the perfect bond between concrete and steel bar is often assumed. The main reason is that it is very difficult to model bond slip in the commercial finite element software, especially in hydrodynamic codes. In the present study, a one-dimensional slide line contact model in LS-DYNA for modeling sliding of rebar along a string of concrete nodes is creatively used to model the bond slip between concrete and steel bars in RC structures. In order to model the bond slip accurately, a new approach to define the parameters of the one-dimensional slide line model from common pullout test data is proposed. Reliability and accuracy of the proposed approach and the one-dimensional slide line in modelling the bond slip between concrete and steel bar are demonstrated through comparison of numerical results and experimental data. A case study is then carried out to investigate the bond slip effect on numerical analysis of blast-induced responses of a RC column. Parametric studies are also conducted to investigate the effect of bond shear modulus, maximum elastic slip strain, and damage curve exponential coefficient on blast-induced response of RC columns. Finally, recommendations are given for modelling the bond slip in numerical analysis of blast-induced responses of RC columns.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.122-128
• /
• 1997

A new approach, called "two-phase approach", has been proposed In this study. Using this approach to solve MONLP(multiobjective nonlinear programming problem), the solution process is divied into two phase. In the first phase, the min-operator is used to aggregate the membership degree of fuzzy goals and constraints. In the second phase, the $\gamma$-operator is used to test and find an efficient solution in the sense of nondominated. It has been shown that no matter what the solution of the problem is unique or not, an efficient solution can be always obtained at the second phase. The proposed approach can be applied to industrial safety problem with multiobjective problems. On the basis of proposed approach, an illustrative numerical example is presented.presented.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.36-42
• /
• 2011

This paper presents a nonlinear soil-structure interaction analysis approach, which can consider precisely characteristics of structures, complicated soil profiles and nonlinear characteristics of soil. Although many methods have been developed to deal with the soil-structure interaction effects in past years, most of them are nearly unpractical since it is difficult to model complicated characteristics of structure and soil precisely. The presented approach overcomes the difficulties by adopting an maligned mesh generation approach and multi-linear model. The applicability of the proposed approach is validated and the effects of complicated characteristics of structure and soil on soil-structure interaction are investigated through the numerical example by the proposed nonlinear soil-structure interaction analysis approach.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.151-163
• /
• 2006

Although various methods for effective modeling of pre-reinforced zones have been suggested for numerical analysis of large section tunnels, tunnel designers refer to empirical cases and literature reviews rather than engineering methods because ones who use commercial programs are unfamiliar with a macro-scale approach in general. Therefore, this paper suggests a simple micro-scale approach combined with the macro-scale approach to determine equivalent design parameters for effective numerical modeling of pre-reinforced zones in tunnel. This new approach is to determine the equivalent stiffness of pre-reinforced zones with combination of ground, bulb, and steel in series or/and parallel. For verification, 3-D numerical results from the suggested approach are compared with those of a realistic model. The comparison suggests that two cases make best approximation to a realistic solution: One is related to the series-parallel stiffness system (hereafter SPSS) in which bulb and steel are coupled in parallel and then connected to the ground in series, and the other is the series stiffness system (hereafter SSS) in which only bulb and steel are coupled in series. The SPSS is recommended for stiffness calculation of pre-reinforced zones because the SSS is inconvenient and time-consuming. The SPSS provides slightly bigger vertical displacement at tunnel crown in weathered rock than other cases and give almost identical results to a realistic model for horizontal displacement at tunnel spring line and ground surface settlement. Displacement trends on weathered rock and weathered soil are similar. The SPSS which is suggested in this paper represents the behavior mechanism of pre-reinforced area effectively.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.3-10
• /
• 1990

Hull form can be described numerically by two approaches, one is to describe a hull form with a set of curves("curve approach"), and the other is to describe it with surfaces directly("surface approach"). This paper describes the numerical definition scheme of hull form using curve approach method which defines the hull form by a set of curves consisting of 2-dimensional transverse section curves and 3-dimensional longitudinal curves. A set of curves in the hull form definition scheme is described by the modified cubic spline which modified the general parametric cubic spline in order to ensure a very smooth curvature distribution within the curve segment even though a curve segment has large tangent angle at its end points. Illustrative examples are given showing the application of the method to represent the hull form of SWATH ship and oceanographic research vessel. Also, examples for hull form transformation are shown by using this method connected with transformation technique.