• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.69-80
• /
• 2015

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$. It was considered that protruding holes with a triangular opening in the absorber plate would invoke turbulence in the air flow to enhance the convection heat transfer. Six different hole configurations were investigated and compared with each other, while the hole opening height was considered as a design variable. Three-dimensional transient analyses were performed with a commercial software package on the airflow and heat transfer in the model. The numerical results were analyzed and compared from the view point of the outlet air temperature and its time response to derive the optimal hole pattern and hole opening height.

• 한국터널지하공간학회 논문집
• /
• 제12권1호
• /
• pp.95-103
• /
• 2010

본 논문은 새로운 연약지반 보강 굴착기술인 PNT 대한 연구로써 공법의 메카니즘 이론을 제시하였으며 선 네일의 설치 보강효과를 확인하기 위하여 2차원 수치해석을 수행하였다. 연구결과 PNT공법의 적용시 선 네일에 의한 연약지반에서의 변위가 크게 감소함을 확인하였다. 또한 PNT공법의 설계적용을 위하여 네일의 설치간격, 설치각도 및 설치 너비 등에 대한 다각적으로 분석하였다.

• Earthquakes and Structures
• /
• 제25권6호
• /
• pp.443-454
• /
• 2023

Steel shear walls are used to strengthen steel and concrete structures. One such system is Partial Attached Steel Shear Walls (PASSW), which are only connected to frame beams. This system offers both structural and architectural advantages. This study first calibrated the numerical model of RC frames with and without PASSW using an experimental sample. The seismic performance of the RC frame was evaluated by 30 non-linear static analyses, which considered stiffness, ductility, lateral strength, and energy dissipation, to investigate the effect of PASSW width and column axial load. Based on numerical results and a curve fitting technique, a lateral stiffness equation was developed for frames equipped with PASSW. The effect of the shear wall location on the concrete frame was evaluated through eight analyses. Nonlinear dynamic analysis was performed to investigate the effect of the shear wall on maximum frame displacement using three earthquake records. The results revealed that if PASSW is designed with appropriate stiffness, it can increase the energy dissipation and ductility of the frame by 2 and 1.2 times, respectively. The stiffness and strength of the frame are greatly influenced by PASSW, while axial force has the most significant negative impact on energy dissipation. Furthermore, the location of PASSW does not affect the frame's behavior, and it is possible to have large openings in the frame bay.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.511-511
• /
• 2001

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.245-246
• /
• 1999

• 산업기술연구
• /
• 제25권B호
• /
• pp.55-62
• /
• 2005

This paper is the results of experimental and numerical works on analyzing the geotechnical engineering behavior and characteristics of excavated clay slope formed by the method of excavated replacement which is one of treatments in soft soil ground. For the centrifuge model tests, models of excavated clay slope were prepared by remolding the marine clayey soil sampled from the field. Tests were performed with changing the slope to investigate the behavior of them. On the other hand, numerical analyses were carried out to analyze the change of safety factor against instability of slope with time. Changes of pore water pressure, shear strength and displacement were also investigated. As results of centrifuge model tests with slopes of 1:1.5 and 1:3 using the confining body of simulating the effect of excavation, for the case of 1:1.5, slope failure occurred right after remove the confining body whereas relatively small displacements within the range of 3.2mm, implying to maintain the stability of slope, were observed for the case of 1:3 slope. From the results of numerical analyses using the software of PLAXIS to investigate the stability of slope after excavation, the minimum safety factor against slope failure was 1.28 for the case of 1:3 slope. The further researches in the future are required with considerations of build up of static pore water pressures during acceleration of centrifuge, depth of excavation influencing the behavior of the slope and permeability of the slope since excavation of the slope was not simulated well resulted from the limitations of apparatus at the stage of excavation during the centrifuge tests.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.778-784
• /
• 2015

얕은기초의 지지력과 침하에 미치는 크기효과를 파악하기 위해 평판과 다양한 크기의 기초를 가정하여 유한요소해석을 수행하고 이론식에 의한 결과와 비교해 보았다. 해석에서 고려한 평판에 대하여 유한요소해석결과 얻은 극한지지력은 이론식에 의한 극한지지력에 비해 큰 차이를 보이지 않았다. 수치해석결과에 따르면 모래지반에 놓인 띠기초의 극한지지력은 이론식에 의한 극한지지력보다 크기효과의 영향을 크게 받았으며 점토지반에 놓인 띠기초의 경우 크기효과의 영향은 없었다. 정사각형기초에 대해서는 대체로 기초지반의 종류에 관계없이 크기효과의 영향이 없었다. 수치해석결과에 따르면 기초의 침하량은 기초지반 종류에 관계없이 이론식과는 달리 크기효과의 영향을 받아 대체로 그 크기가 기초폭에 비례하였다.

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3374-3383
• /
• 2011

본 연구는 유한한 크기의 선저경사각을 갖는 2차원 쐐기형 구조물의 슬래밍 충격 현상을 수치 해석하였다. 비압축성 유체를 가정하였으며, 구조물의 입수 속도는 일정하게 유지하였다. 자유수면의 대 변형 및 동적 거동의 해석을 위해서 Geo-reconstruct(or PLIC-VOF) scheme을 사용하였다. 선저경사각이 $10^{\circ}$, $20^{\circ}$ 및 $30^{\circ}$인 경우에 대해서 해석을 수행하였으며, 각각의 선저경사각에 대하여 입수면의 격자 크기 및 입수 속도를 변화시켜 슬래밍 충격력 수치 해석 결과에 미치는 영향을 조사하였다. 수치해석 결과는 Dobrovol'skaya(1969)의 상사해(similarity solution), Wagner 방법에 기초한 점근해(asymptotic solution) 및 경계요소법(Zhao et al.(1993))에 의한 해석 결과와 비교하였다.

• 한국지반공학회논문집
• /
• 제23권6호
• /
• pp.85-95
• /
• 2007

본 연구에서는 버티칼 드레인으로 개량된 점성토 지반의 잔류침하 예측법을 제안하기 위하여 모델지반에 대해 탄-점성 압밀이론을 이용한 일련의 수치해석을 행하였다. 그리고 수치해석을 통하여 정규압밀영역에 대해 유효반경비, 압밀압력의 영향과 버티칼 드레인에 의한 3차원압밀에 있어서의 잔류침하를 감소시키기 위한 과압밀영역에서의 과압밀비의 영향을 조사하였다. 또한, 모델지반의 수치해석결과에 기초하여 버티칼 드레인 타설지반의 잔류침하 예측법과 잔류침하를 허용치 이내로 제어하기 위해 필요한 과압밀비의 결정법을 제안하였다.

• Geomechanics and Engineering
• /
• 제17권2호
• /
• pp.119-131
• /
• 2019

Time dependent creep settlements are one of the most important causes of material deteriorations for the huge water structures such as concrete faced rockfill dams (CFRDs). For this reason, performing creep analyses of CFRDs is vital important for monitoring and evaluating of the future and safety of such dams. In this study, it is observed how changes viscoplastic behaviour of a CFR dam depending the time. Ilısu dam that is the longest concrete faced rockfill dam (1775 m) in the world is selected for the three dimensional (3D) analyses. 3D finite difference model of Ilısu dam is modelled using FLAC3D software based on the finite difference method. Two different special creep material models are considered in the numerical analyses. Wipp-creep viscoplastic material model and burger-creep viscoplastic material model were rarely used for the creep analyses of CFRDs in the last are taken into account for the concrete slab and rockfill materials-foundation, respectively. Moreover, interface elements are defined between the concrete slab-rockfill materials and rockfill materials-foundation to provide interaction condition for 3D model. Firstly, dam and foundation are collapsed under its self-weight and static behaviour of the dam is evaluated for the empty reservoir conditions. Then, reservoir water is modelled considering maximum water level of the dam and time-dependent creep analyses are performed for maximum reservoir condition. In this paper, maximum principal stresses, vertical-horizontal displacements and pore pressures that may occur on the dam body surface during 30 years (from 2017 to 2047) are evaluated in detail. According to numerical analyses, empty and maximum reservoir conditions of Ilısu dam are compared with each other in detail. 4 various nodal points are selected under the concrete slab to better seen viscoplastic behaviour changes of the dam and viscoplastic behaviour differences of these points during 30 years are graphically presented. It is clearly seen that horizontal-vertical displacements and principal stresses for maximum reservoir condition are more than the empty reservoir condition of the dam and significant pore pressures are observed during 30 years for maximum reservoir condition. In addition, horizontal-vertical displacements, principal stresses and pore pressures for 4 nodal points obviously increased until a certain time and changes decreased after this time.