• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.54-60
• /
• 2007

This paper proposes a built-in-self-repair (BISR) structure using 2-dimensional spare memory to effectively self-repair faults of an embedded memory. In case of multiple faults in the same row (column) of an embedded memory, the previous method using 1-D spare column (row) memory needs the same number of spare memory columns (rows) as the number of faults to self-repair them. while the new method using 2-D spare memory needs only one spare row (column) to self-repair them. Also, the virtual divided memory is adopted to be able to self-repair using not a full spare column memory but the only partial spare column memory corresponding to the faults. A self-repair circuit with $64\times1-bit$ core memory and $2\times8$ 2-D spare memory is designed. And the circuit includes a built-in-self-test block using the 13N March algorithm. The circuit has been implemented using the $0.25{\mu}m$ MagnaChip CMOS process and has $1.1\times0.7mm^2$ chip area with 10,658 transistors.

• Asian Journal of Turfgrass Science
• /
• v.1 no.1
• /
• pp.7-17
• /
• 1987

The experiment with two levels of nitrogen (0. and 300kg / ha / year) and two levels of clipping height (1.5cm and 4cm) was conducted on the field during the period 3 June to 23 October 1985. Clonal lines of korean lawngrass ( Zoysia japonica Steud.) and manilagrass ( Zoysia matrella ( L.) Merr.)of Daejon origin were established in June, as individual clone in rows 30cm apart with a 40cm spacing between clones, actually 4 clones each plot. The results obtained were as follows : 1. When no nitrogen was applied to korean lawngrass, leaf blade which appeared during the August / early September period remained green for a period of about 10 weeks and even leaves emerged in late September lived for 42 days. However, leaf longevity did not exceed 8 weeks as nitrogen was applied. In contrast the leaf longevity of manilagrass which emerged during the mid - August / early September period was 11 weeks and, under the nitrogen applied, 9 weeks, indicating that the life - saen of individual leaf of manilagrass may be longer than that of korean lawngrass. Meanwhile, clipping height had no effect on the leaf longevity in both grasses. 2. During the July / August period, tiller number, green leaf number and DM weight of korean lawngrass were increased significantly with fertilizer nitrogen, but were not with two levels of clipping height. This trend was reversed after late September : no effect of nitrogen was appeared. Instead, lax clipping increased tiller number, green leaf number and DM weight. Green leaves stimulated by lax clipping resulted in the occurrance of more dead leaves in late October. 3. The increase of tiller number, green leaf number, and DM weight of korean lawngrass due to nitrogen application appeared to be of significance in early September. Unlike korean lawngrass, however, this significant increase was maintained to late October when new green leaves still emerge. Clipping height had little effect on the growth of manilagrass by early September, but since then, lax clipping stimulated leaf appearance, possibly resulting in a remained green color of manilagrass turf. 4. Among the stolons outgrown until early September, the primary stolon was not influenced by nitrogen and clipping treatments to produce only 2 - 3 stolons. However, 1st branch stolon as affected by nitrogen increased significantly, so most of stolons which occurred consisted of 1st branch stolon. 5. Until early September, stolon length obtained at nil nitrogen level was chiefly caused by lengthening the primary stolons. By applying nitrogen the primary stolons of korean lawngrass was longer than 1st branch stolons when severe clipping was involved and in turn, shorter than 1st branch stolons when lax clipping was concerned. In manilagrass, 1st branch stolons were much longer than the primary stolons when turf was clipped severely but in conditions of lax clipping, there was little difference in length between primary and 1st branch stolons. 6. Stolon nodes of both korean lawngrass and manilagrass were positively influenced by nitrogen, but no particular increases by imposing clipping height treatment was marked in manilagrass. Although the stolon of korean lawngrass was grown until late october, the growth stimulated by nitrogen was not so remarkable as to exceed that a by nil N. 7. The thickness of korean lawngrass and manilagrass was greatest in late September, but that of manilagrass did not differ significantly from that in late October. 8. The response of stolon length of korean lawngrass to lax clippings was not so great in late October as to that to severe clippings. On the other hand, the positive effect of lax clippings to stolon length in m anilagrass was confirmed even in late October.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.739-751
• /
• 2015

This study investigated the table settings used in Bul-chun-wi sacrificial rituals in Sangju, Gyeongpook Province. This study took place from May 2014 to April 2015 and incorporated field research and literature review. The subjects of the study were Sojae jongga (family head), Wolgan jongga, Ubook jongga and Ipjae jongga. There were four rows in the table setting of the Wolgan, whereas there were five rows in the other jonggas. In row 5, there were fruits, seeds and confections. In row 4, there were vegetables. In row 3, there was tang (stew); in row 2, juk (steamed meats or fishes) and pyun (rice cake); and in row 1, meh (boiled rice), geng (soup) and myun (noodles). The common food setting was arranged in the order of meh, geng, myun, ganjang (Korean soy sauce), poh (dried meat/fish), chimchae (water kimchi), dates, chestnuts, pears, persimmons, walnuts, bracken, bellflowers, croaker, pyun, and ssam (rice wrapped in lettuce leaves). Ubook jongga had the most number of stews at seven. Sojae and Ipjae jongga each had five stews, and Wolgan jongga had three. The smaller Wolgan jongga had gehjuk (boiled chicken), uhjuk (steamed fish) and yookjuk (boiled meat) arranged in a neat pile on one dish used for rituals, whereas Ubook jongga had gehjuk, uhjuk and yookjuk arranged separately. Sojae and Ipjae jongga had gehjuk arranged separately while yookjuk and uhjuk were arranged as dojuk (gehjuk, uhjuk, yookjuk). The uhjuk was arranged separately. In Wolgan jongga, po was arranged on the right while in the other jonggas, it was arranged to the left. For raw meat Ubook jongga, raw mackerel; Ipjae jongga, raw croaker, and Sojae jongga Yukhoe (beef tartare) were set. However, pork, chicken and croaker were cooked. Other ritual food were used in seasoning and boiling. In the geng Wolgan and Ipjae jongga used miyeokguk (seawood soup), whereas Sojae and Ubook jongga used tangguk (meat soup with vegetables). For the ritual food, most jongga ordered yoogwa, yakgwa and bonpyun as one part, rice cakes (steamed rice cake, glutinous rice cake, jeungpyun, gyungdan), and jehju (alcohol). The other ritual food was prepared on the day by jongga.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.226-234
• /
• 1984

In order ti find out the optimum seeding time(OST) and optimum seed rate(OSR) of Italian ryegrass on seed production, this studies with tetraploid cv. Tetrone were carried out on the experimental field of Livestock Experiment Station. Treatments included seed rates of 1, 2, 3 and 4 kg per 10a and combined with seeding time on 20, 30 Aug, 9, 19 and 29, September 1983. Seeds were sown in rows 50 cm apart and were spaced in a continuous line with width of 15 cm within the rows. The results are summarized as follows: 1. Autumn tillers could be classified into three groups from winter-killing point of view, namely winter-killing completely, damaged growing point only and living tillers. 2. The young inflorescence-bearing stem in Italian ryegrass which were sown earlier than 9. September were more susceptible to winter killing. Tiller buds in those stems which originated from an axillary buds at the stem base within senescent leaf-sheaths emerged lately in spring, and consequently heading was delayed, culm length shortened and seed yield reduced. 3. Tiller buds which originated from damaged growing point only and living tillers in moderate shoots emerged early in spring and those tillers became mainly spike-bearing culm. 4. The emergence-time of tillers influenced on culm-, spike- length and ripenness more than seeding time and seed rate. 5. Seed yield was mostly affected by the number of spikes per unit area. 6. For the safety of over-wintering and enough spikes on seed production, OST and OSR at Suweon were the last part of September and 2-3 kg per 10a, respectively. Especially OSR was 2 kg per 10a for early and 3 kg per 10a for late OST.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.313-324
• /
• 2010

With growing interest in biodiversity in rice paddies, efficient sampling methods for quantitative evaluation of aquatic macroinvertebrates are needed because of their important role in rice paddies' food webs. For this reason, we sought a proper sampling method through comparing data collected by using aquatic net, quadrat, and core in rice paddies located in Chuncheon-si, Kangwon-do, Hongseong-gun, and Chungcheongnam-do. Because the frame of the net was rectangular and had a flat bottom, the area, sampledwith the aquatic net, was calculated by multiplying the net width by the sweeping length, All samples were taken from the space between the rows of rice plants. Twenty four taxa of macro invertebrates were collected in Chuncheon and 28 taxa in Hongseong. In Chuncheon, the number of taxa was similar among three sampling methods (17-18 taxa), but the number of individuals was different (aquatic net, $1,317/m^2$; quadrat, $1,368/m^2$; core, $1,810/m^2$. In Hongseong, the number of taxa sampled by aquatic net was the highest (aquatic net, 25 taxa; quadrat, 21 taxa; core, 16 taxa), but the core was the highest in the number of individuals (aquatic net, $1,586/m^2$; quadrat, $2,595/m^2$; core, $3,704/m^2$. The efficiency of samplers differed among taxa. Most of aquatic insect taxa were more abundant in the aquatic net, while those living on or in the paddy substratum such as Oligochaeta and Chironomidae were collected more in the quadrat sampler. To collect quantitative data for aquatic insects as well as to produce inventory of rare taxa, we suggest, based on samplers used in this study, to take quantitative samples of 6 replications from each of the edge and inner zones of a rice paddy by using an aquatic net, and to take qualitative samples both from sides of levees and the inner zone of rice paddy by using an aquatic net.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1041-1043
• /
• 1993

Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)＋dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

• Parasites, Hosts and Diseases
• /
• v.46 no.4
• /
• pp.285-288
• /
• 2008

To examine the infection status of freshwater fish with Gnathostoma spp. larvae in Myanmar, we purchased 15 snakeheads, Channa striatus, from a local market in a suburban area of Naypyidaw, the new capital city. Two larval gnathostomes were collected using an artificial digestion technique, and observed by a light microscope and a scanning electron microscope. The size of an intact larva was 2.65 mm long and 0.32 mm wide. The characteristic morphology of the larvae included the presence of a long esophagus (0.80 mm long), 2 pairs of cervical sacs (0.43 mm long), and a characteristic head bulb with 4 rows of hooklets. The number of hooklets in the 1st, 2nd, 3rd, and 4th row was 45, 48, 50, and 52, respectively. Based on these morphological characters, the larvae were identified as the advanced 3rd-stage larvae of Gnathostoma spinigerum. This is the first report of detection of G. spinigerum 3rd-stage larvae in the central part of Myanmar. Our study suggests that intake of raw meat of snakehead fish in Myanmar may result in human gnathostomiasis.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.107-114
• /
• 2016

Purpose - Loading can decrease the productivity due to the possibility of carrying out with the opposite order of storage in container terminal. When the container is to be taken out, it is needed to move the container stacked upon the container to be carried out to other place temporarily. It is called as rehandling. Remarshalling, with the loading plan, is the arranging the containers before the ship arrives in order to avoid the rehandling during the carrying out. The present study tried to find out the factors affecting the efficiency when building the remarshalling plan with the utilization of neighboring storage space as a outer slot, and analyzed the efficiency of several remarshalling algorithms with the combination of those factors. Research design, data and methodology - The present study used, when the remarshalling plan is prepared for utilizing the outer slot, the simulation methods in order to compare the efficiency of the remarshalling algorithms which made with the factors affecting the efficiency. The factors affecting the efficiency are the method of making the child node, method of arrangement, and possibility of application of FIX. In order to analyze the affecting factors on the efficiency, several algorithms are prepared with the combination of production of the child node and the arrangement method with the availability of FIX application. With this algorithm, the effect of the factors on the efficiency after building up of remarshalling plan with the target on the bay with 10 rows, 8 columns, and 10 indices. Results - The method of rearrangement and making of a child node as the factor affecting the efficiency of remarshalling utilization of the outer bay were studied. It is efficient to combine the method of making a child node with MCS in order to reduce the number of moving the containers. For reducing the time in carrying out, it was found that all arrangement methods should be combined with RCS for the efficiency. The result of experiment shows the application of FIX with good result in case of succession ratio. In addition, when FIX was not applied, all of the most combinations resulted in short time in remarshalling. As a result, it can be concluded that the algorithm with proper combination of making the child node and the arrangement can increase the job efficiency based on the importance. Conclusion - The present study suggested and analyzed the algorithms with the combination of the arrangement method, the making of child node, and FIX. It is needed to develop the algorithm to judge the possibility whether the best remarshalling plan can be built or not within the bay in order to find a better method between the two cases such as within the bay and outer the bay. As a method for extending the study on the factors affecting the efficiency, it is possible to find out the way to build the remarshalling plan within the permitted time under any storage situation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.362-362
• /
• 2017

Dissemination of IPB3S rice variety combined with cultivation technology named IPB Prima was aimed to introduce IPB research product particularly for IPB rice variety with high-yield character that is IPB3S. The rice variety IPB3S and IPB Prima cultivation technology was expected to be one of solution to improve rice productivity and accelerate to food self-sufficiency in Indonesia. Research sctivity was consist of three main research unit i.e. (1) Dissemination of IPB3S rice variety and IPB Prima production technology; (2) The development of Information and management web-based system (IMS) for planning and monitoring IPB3S and IPB Prima application distribution; and (3) The development of High-capacity grain drying system in Fluidized-bed drying ang in-store drying system. The objective of main research i.e. to introduce IPB high-yield rice variety, to accelerate rice productivity to support self-sufficiency, to develop integrated system model through fluidized and in-store drying, and to develop web-based management-information system in result analyzing IPB3S and IPB Prima distribution and technology application. The dissemination activities was arranged in two location. The first location was in Banyuwangi, East Java with total area 10.87 ha, consist of 8.91 ha planting area for IPB3S and 1.96 ha planting area for Ciherang. The second location is in Tegal, Middle Java with total planting area in 5 ha. The experiment was arranged in different treatment of varieties and cultivation method. The experiment consist of (1) rice variety Ciherang with conventional cultivation technology (P0); (2) rice variety Ciherang with IPB Prima cultivation technology (P1); (3) rice variety IPB3S with conventional cultivation technology (P2); (4) rice variety IPB3S with IPB Prima cultivation technology (P3). Planting distance for twin rows system is $50cm{\times}25cm{\times}12.5cm$. Planting distance for single row system is $25cm{\times}25cm$. The research result elucidated that productivity result in two location has different grades in similar trend. Experiment in Tegal resulted P0 result is $6.18ton\;ha^{-1}$, P1 result is $6.30ton\;ha^{-1}$, P2 result is $6.82ton\;ha^{-1}$, P3 result is $7.31ton\;ha^{-1}$. Experiment in Banyuwangi resulted optimum production of IPB3S variety productivity number are $7.29ton\;ha^{-1}$, while Ciherang are $6.73ton\;ha^{-1}$.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.61-61
• /
• 2017

Dissemination of IPB3S rice variety combined with cultivation technology named IPB Prima was aimed to introduce IPB research product particularly for IPB rice variety with high-yield character that is IPB3S. The rice variety IPB3S and IPB Prima cultivation technology was expected to be one of solution to improve rice productivity and accelerate to food self-sufficiency in Indonesia. Research sctivity was consist of three main research unit i.e. (1) Dissemination of IPB3S rice variety and IPB Prima production technology; (2) The development of Information and management web-based system (IMS) for planning and monitoring IPB3S and IPB Prima application distribution; and (3) The development of High-capacity grain drying system in Fluidized-bed drying ang in-store drying system. The objective of main research i.e. to introduce IPB high-yield rice variety, to accelerate rice productivity to support self-sufficiency, to develop integrated system model through fluidized and in-store drying, and to develop web-based management-information system in result analyzing IPB3S and IPB Prima distribution and technology application. The dissemination activities was arranged in two location. The first location was in Banyuwangi, East Java with total area 10.87 ha, consist of 8.91 ha planting area for IPB3S and 1.96 ha planting area for Ciherang. The second location is in Tegal, Middle Java with total planting area in 5 ha. The experiment was arranged in different treatment of varieties and cultivation method. The experiment consist of (1) rice variety Ciherang with conventional cultivation technology (P0); (2) rice variety Ciherang with IPB Prima cultivation technology (P1); (3) rice variety IPB3S with conventional cultivation technology (P2); (4) rice variety IPB3S with IPB Prima cultivation technology (P3). Planting distance for twin rows system is $50cm{\times}25cm{\times}12.5cm$. Planting distance for single row system is $25cm{\times}25{\times}cm$. The research result elucidated that productivity result in two location has different grades in similar trend. Experiment in Tegal resulted P0 result is $6.18ton\;ha^{-1}$, P1 result is $630ton\;ha^{-1}$, P2 result is $6.82ton\;ha^{-1}$, P3 result is $7.31ton\;ha^{-1}$. Experiment in Banyuwangi resulted optimum production of IPB3S variety productivity number are 7.29 ton ha-1, while Ciherang are $6.73ton\;ha^{-1}$.