• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.7
• /
• pp.833-841
• /
• 2007

The aim of this paper is to analyze the conjugate problems of heat conduction in solid walls coupled with laminar free convection flow adjacent to a vertical flat plate under boundary layer approximation. Using the similarity transformations the governing boundary layer equations for momentum and energy are reduced to a system of partial differential equations and then solved numerically using Finite Difference Method(FDM) known as the Keller-box scheme. Computed solutions to the governing equations are obtained for a wide range of non-dimensional parameters that are present in this problem, namely the coupling parameter P. the Prandtl number Pr and the heat generation parameter Q. The variations of the local heat transfer rate as well as the interface temperature and the friction along the plate and typical velocity and temperature profiles in the boundary layer are shown graphically. Numerical solutions have been consider for the Prandtl number Pr=0.70

• Journal of Mechanical Science and Technology
• /
• v.15 no.10
• /
• pp.1451-1460
• /
• 2001

The critical condition of the onset of buoyancy-driven convective motion of uniformly heated horizontal fluid layer was analysed by the propagation theory which transforms the disturbance quantities similarly. The dimensionless critical time, $\tau$$\sub$c/, is obtained as a function of the Rayleigh number and the Prandtl number. Based on the stability criteria and the boundary-layer instability model, a new heat transfer correlation which can cover whole range of Rayleigh number was derived. Our theoretical results predict the experimental results quite reasonably.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.421-431
• /
• 2005

This paper introduces a new approach for saving build time of hybrid rapid prototyping by decomposing a part into minimum number of layers. In the hybrid rapid prototyping, a part of a complicated shape is realized by adding layers of a simpler shape, each of which is obtained by machining a sheet of constant thickness from its top and bottom surfaces. Thus it is desired to decompose a given part into the minimum number of layers while guaranteeing each layer to be fabricated from the given sheets using a 3-axis milling machine. To satisfy these requirements, a concave edge-based algorithm is proposed to decompose a part into layers by considering the tool accessibility, the total number of layers, and the allowable sheet thickness.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.57-65
• /
• 2018

Artificial neural network is inspired by the biological neural network. For simplicity, in computer science, it is represented as a set of layers. Many research has been made in evaluating the number of neurons in the hidden layer but still, none was accurate. Several methods are used until now which do not provide the exact formula for calculating the number of thehidden layer as well as the number of neurons in each hidden layer. In this paper model selection approach was presented. Proposed model is based on geographical analysis of decision boundary. Proposed model selection method is useful when we know the distribution of the training data set. To evaluate the performance of the proposed method we compare it to the traditional architecture on IRIS classification problem. According to the experimental result on Iris data proposed method is turned out to be a powerful one.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.967-987
• /
• 2020

A numerical analysis is carried out for the marine propellers in open water conditions to investigate the effect of the wall treatments in model and full scale. The standard wall function to apply the low of the wall and the two layer zonal model to calculate the whole boundary layer for a transition phenomenon are used with one turbulence model. To determine an appropriate distance of the first grid point from the wall when using the wall function, a formula based on Reynolds number is suggested, which can estimate the maximum y+ satisfying the logarithmic law. In the model scale, it is confirmed that a transition calculation is required for a model scale propeller with low Reynolds number that the transient region appears widely. While in the full scale, the wall function calculation is recommended for efficient calculations due to the turbulence dominant flow for large Reynolds number.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.41-54
• /
• 2002

In this study, we have analyzed the effects of the membrane layer and the bragg reflector layers on the resonance characteristics through comparing the characteristics of the membrane type FBAR (Film Bulk Acoustic Wave Resonator) and the one type bragg reflector layers with those of the ideal FBAR with top and bottom electrode contacting air by using equivalent circuit technique. It is assumed that ZnO is used for piezoelectric film, $SiO_2$ are used for membrane layer and low acoustic impedance layer, W are used for the high acoustic reflector layer and Al is used for the electrode. Each layer is considered to have a acoustic propagation loss. ABCD parameters are picked out and input impedance is calculated by converting 1-port equivalent circuit to simplified equivalent circuit that ABCD parameters are picked out possible. From the variation of resonance frequency due to the change of thickness of electrode layers, reflector layers and membrane layer it is confirmed that membrane layer and the reflector layer just under the electrode have the greatest effect on the variation of resonance frequency. From the variation of resonance properties, K and electrical Q with the number of layers, K is not much affected by the number of layers but electrical Q increases with the number of layers when the number of layers is less than seven. The electrical Q is saturated when the number of layers is large than six. The electrical Q is dependent of mechanical Q of reflector layers and membrane layer. Both ladder filter and SCF (Stacked Crystal Filters) show higher insertion loss and out-of-band rejection with the increase of the number of resonators. The insertion loss decreases with the increase of the number of reflector layers but the bandwidth is not much affected by the number of reflector layers. Ladder Filter and SCF with membrane layer show the spurious response due to spurious resonance properties. Ladder filter shows better skirt-selectivity characteristics in bandwidth but SCF shows better characteristics in insertion loss.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.683-686
• /
• 2002

The hydrodynamic instability of the three-dimensional boundary-layer over a rotating disk has been numerically investigated for three cases flows using linear stability theory (i.e. Rossby number, Ro = -1, 0, and 1). Detailed numerical values of the disturbance wave number, wave frequency, azimuth angle, radius (Reynolds number, Re) and other characteristics have been calculated for $K{\acute{a}}rm{\acute{a}}n$, Ekman and $B{\"{o}}ewadt$ boundary-layer flows. Neutral curves for these flows are presented. Presented are the neutral stability results concerning the two instability modes (Type I and Type II) by using a two-point boundary value problem code COLUEW that was based upon the adaptive orthogonal collocation method using B-spline. The prediction from the present results on both instability modes among the three cases agrees with the previously known numerical and experimental data well.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.364-373
• /
• 2012

In this paper, we propose combined relay selection and cooperative beamforming schemes for physical layer security. Generally, high operational complexity is required for cooperative beamforming withmultiple relays because of the required information exchange and synchronization among the relays. On the other hand, while it is desirable to reduce the number of relays participating in cooperative beamforming because of the associated complexity problem, doing so may degrade the coding gain of cooperative beamforming. Hence, we propose combined relay selection and cooperative beamforming schemes, where only two of the available relays are selected for beamforming and data transmission. The proposed schemes introduce a selection gain which partially compensates for the decrease in coding gain due to limiting the number of participating relays to two. Both the cases where full and only partial channel state information are available for relay selection and cooperative beamforming are considered. Analytical and simulation results for the proposed schemes show improved secrecy capacities compared to existing physical layer security schemes employing cooperative relays.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1720-1730
• /
• 1995

Finite-difference analysis was conducted to study the natural convection of a stably stratified salt-water solution in an annulus due to lateral heating. The main purpose of this study is to examine in detail the multi-layered flow structure. Calculation was thus made for R $a_{\eta}$=2*10$^{5}$ and 6.5*10$^{5}$ . Formation of layered flow structure, merging process of layers, the corresponding temperature and concentration distributions, Nusselt number variations with time are examined. Numerical results show that in each layer, the temperature profile looks 'S`-shaped and the concentration profile is uniform due to the convective mixing. The formation of the roll and the layer is governed by natural convection due to the temperature gradient and the merging process of the layer by diffusion of the concentration.ation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.53-61
• /
• 2013

The present study elucidated the growth properties of Sasa borealis communities distributed in the lower layer of deciduous broadleaf forests in temperate zones and analyzed the correlation between the growth properties of S. borealis and positional environmental factors. The higher the culm height of S. borealis was, the higher the values of the leaf number, leaf area, and foliage layer thickness became. This might be because as the culm height of S. borealis increased, the acquisition of light sources became easier so that the biomass of leaves increased simultaneously for smooth anabolism. S. borealis seem to change their growth mode for smooth acquisition of light resources. The culm density of S. borealis and the leaf number, leaf area and foliage layer thickness of S. borealis did not show any clear correlation. The values of the culm height, leaf number, leaf area, and foliage layer thickness of S. borealis as the above altitude of the location of S. borealis increased. It seems like that growth conditions such as temperatures and winds are deteriorated as the above altitude of the location of S. borealis increased so that S. borealis becomes smaller. No clear correlations were shown between the physiochemical properties of soil and S. borealis' growth properties. It seems like that the growth of S. borealis complexly intertwined with diverse environmental factors and that due to the physiological integration of S. borealis, certain physiochemical properties do not unilaterally affect S. borealis' growth properties.