• Korean Journal of Plant Taxonomy
• /
• v.41 no.4
• /
• pp.329-337
• /
• 2011

The Acer wilsonii complex including A. wilsonii, A. tutcheri, and A. confertifoilum is distributed in southern China. Morphological variation was examined to delimit the species and to determine whether recognition at the specific level was warranted. Univariate and bivariate statistical methods, based on data taken from herbarium specimens, were used to examine morphological variation between and within species. This study showed that A. tutcheri differed from A. wilsonii by its rather short inflorescence, small leaf blades, and three leaf lobes with distinctive serrate leaf lobes. In contrast, there was virtually no separation of taxa with respect to the paniculate-corymbose or short paniculate inflorescence between A. confertifolium and A. tutcheri, suggesting that A. confertifolium morphologically resembled A. tutcheri and is a rather smaller form of it. Circumscription of Acer wilsonii has been quite troublesome, because the important holotype and isotype specimens contained different species under the same number and were misleading with respect to the correct application of the name. Furthermore, lobation is very weak within ser. Sinensia, but diversified inflorescences usually occur in China. A three lobed leaves species, A. wilsonii, represents the reduction in lobation without any modification of panicle inflorescences and seems to be closely related to A. sinense. However, A. tutcheri, which shows a reduction in panicle inflorescence with four petals and sepals, may not be closely related to A. sinense. Three lobed taxa may not correctly reflect the true relationship within ser. Sinensia. The designated lectotype of A. wilsonii, line drawings of representative leaves of related species, a key, and distribution maps of these taxa are presented.

• Journal of Hydrogen and New Energy
• /
• v.33 no.1
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.5
• /
• pp.321-328
• /
• 2015

In recent years, there has been an increasing demand to apply the new IACS(International Association of Classification Societies) standards for ice and polar-classed ships. For ice-class vessel propulsion system, the ice impact torque design criterion is defined as a periodic harmonic function in relation to the number of the propeller blades. However, irregular or transient ice impact torque is assumed to occur likely in actual circumstances rather than these periodic loadings. In this paper, the reliability and torsional vibration characteristics of a comparatively large six-cylinder marine diesel engine for propulsion shafting system was examined and reviewed in accordance with current regulations. In this particular, the transient ice impact torque and excessive vibratory torque originating from diesel engine were interpreted and the resonant points identified through theoretical analysis. Several floating ice impacts were carried out to evaluate torque responses using the calculation method of classification rule requirement. The Newmark method was used for the transient response analysis of the whole system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.9
• /
• pp.890-899
• /
• 2010

An experimental study has been conducted to analyze the operating forces on a partially admitted turbine blade using a linear cascade apparatus. Axial-type blades were used and the blade chord was 200mm. The rectangular nozzle was applied and its size was $200mm{\times}200mm$. The experiment was done at $3{\times}10^5$ of Reynolds number based on the chord. The rotational force and axial force on the blade were measured at steady state by moving the blade to the rotational direction. The operating forces were measured at three different nozzle install angles of $58^{\circ}$, $65^{\circ}$ and $72^{\circ}$ for off-design performance test. In addition, three different solidities of 1.25, 1.38 and 1.67 were applied. From the results, the maximum rotational force was increased when the solidity was decreased and the nozzle install angle was decreased. The axial force was increased by decreasing the nozzle install angle. The reverse axial force was obtained in the partially admitted region when the nozzle install angle was increased to $72^{\circ}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.1-40
• /
• 1973

There is a general tendency to increase nitrogen level in rice production to insure an increased yield. On the other hand, percentage of ripened grains is getting decreased with such an increased fertilizer level. Decreasing of the percentage is one of the important yield limiting factors. Especially the newly developed rice variety, 'Tongil' is characterized by a relatively low percentage of ripened grains as compared with the other leading varieties. Therefore, these studies were aimed to finding out of some measures for the improvement of ripening in rice. The studies had been carried out in the field and in the phytotron during the period of three years from 1970 to 1972 at the Crop Experiment Station in Suwon. The results obtained from the experiments could be summarized as follows: 1. The spikelet of Tongil was longer in length, more narrow in width, thinner in thickness, smaller in the volume of grains and lighter in grain weight than those of Jinheung. The specific gravity of grain was closely correlated with grain weight and the relationship with thickness, width and length was getting smaller in Jinheung. On the other hand, Tongil showed a different pattern from Jinheung. The relationship of the specific gravity with grain weight was the greatest and followed by that with the width, thickness and length, in order. 2. The distribution of grain weight selected by specific gravity was different from one variety to another. Most of grains of Jinheung were distributed over the specific gravity of 1.12 with its peak at 1.18, but many of grains of Tongil were distributed below 1.12 with its peak at 1.16. The brown/rough rice ratio was sharply declined below the specific gravity of 1.06 in Jinheung, but that of Tongil was not declined from the 1.20 to the 0.96. Accordingly, it seemed to be unfair to make the specific gravity criterion for ripened grains at 1.06 in the Tongil variety. 3. The increasing tendency of grain weight after flowering was different depending on varieties. Generally speaking, rice varieties originated from cold area showed a slow grain weight increase while Tongil was rapid except at lower temperature in late ripening stage. 4. In the late-tillered culms or weak culms, the number of spikelets was small and the percentage of ripened grains was low. Tongil produced more late-tillered culms and had a longer flowering duration especially at lower temperature, resulting in a lower percentage of ripened grains. 5. The leaf blade of Tongil was short, broad and errect, having light receiving status for photosynthesis was better. The photosynthetic activity of Tongil per unit leaf area was higher than that of Jinheung at higher temperature, but lower at lower temperature. 6. Tongil was highly resistant to lodging because of short culm length, and thick lower-internodes. Before flowering, Tongil had a relatively higher amount of sugars, phosphate, silicate, calcium, manganese and magnesium. 7. The number of spikelets of Tongil was much more than that of Jinheung. The negative correlation was observed between the number of spikelets and percentage of ripened grains in Jinheung, but no correlation was found in Tongil grown at higher temperature. Therefore, grain yield was increased with increased number of spikelets in Tongil. Anthesis was not occurred below 21$^{\circ}C$ in Tongil, so sterile spikelets were increased at lower temperature during flowering stage. 8. The root distribution of Jinheung was deeper than that of Tongil. The root activity of Tongil evaluated by $\alpha$-naphthylamine oxidation method, was higher than that of Jinheung at higher temperature, but lower at lower temperature. It is seemed to be related with discoloration of leaf blades. 9. Tongil had a better light receiving status for photosynthesis and a better productive structure with balance between photosynthesis and respiration, so it is seemed that tongil has more ideal plant type for getting of a higher grain yield as compared with Jinheung. 10. Solar radiation during the 10 days before to 30 days after flowering seemed enough for ripening in suwon, but the air temperature dropped down below 22$^{\circ}C$ beyond August 25. Therefore, it was believed that air temperature is one of ripening limiting factors in this case. 11. The optimum temperature for ripening in Jinheung was relatively lower than that of Tongil requriing more than $25^{\circ}C$. Air temperature below 21$^{\circ}C$ was one of limiting factors for ripening in Tongil. 12. It seemed that Jinheung has relatively high photosensitivity and moderate thermosensitivity, while Tongil has a low photosensitivity, high thermosensitivity and longer basic vegetative phase. 13. Under a condition of higher nitrogen application at late growing stage, the grain yield of Jinheung was increased with improvement of percentage of ripened grains, while grain yield of Tongil decreased due to decreasing the number of spikelets although photosynthetic activity after flowering was. increased. 14. The grain yield of Jinheung was decreased slightly in the late transplanting culture since its photosynthetic activity was relatively high at lower temperature, but that of Tonil was decreased due to its inactive photosynthetic activity at lower temperature. The highest yield of Tongil was obtained in the early transplanting culture. 15. Tongil was adapted to a higher fertilizer and dense transplanting, and the percentage of ripened grains was improved by shortening of the flowering duration with increased number of seedlings per hill. 16. The percentage of vigorous tillers was increased with a denser transplanting and increasing in number of seedlings per hill. 17. The possibility to improve percentage of ripened grains was shown with phosphate application at lower temperature. The above mentioned results are again summarized below. The Japonica type leading varieties should be flowered before August 20 to insure a satisfactory ripening of grains. Nitrogen applied should not be more than 7.5kg/10a as the basal-dressing and the remained nitrogen should be applied at the later growing stage to increase their photosynthetic activity. The morphological and physiological characteristics of Tongil, a semi-dwarf, Indica $\times$ Japonica hybrid variety, are very different from those of other leading rice varieties, requring changes in seed selection by specific gravity method, in milling and in the cultural practices. Considering the peculiar distribution of grains selected by the method and the brown/rough rice ratio, the specific gravity criterion for seed selection should be changed from the currently employed 1.06 to about 0.96 for Tongil. In milling process, it would be advisable to bear in mind the specific traits of Tongil grain appearance. Tongil is a variety with many weak tillers and under lower temperature condition flowering is delayed. Such characteristics result in inactivation of roots and leaf blades which affects substantially lowering of the percentage of ripened grains due to increased unfertilized spikelets. In addition, Tongil is adapted well to higher nitrogen application. Therefore, it would be recommended to transplant Tongil variety earlier in season under the condition of higer nitrogen, phosphate and silicate. A dense planting-space with three vigorous seedlings per hill should be practiced in this case. In order to manifest fully the capability of Tongil, several aspects such as the varietal improvement, culural practices and milling process should be more intensively considered in the future.he future.

• Korean journal of applied entomology
• /
• v.9 no.1
• /
• pp.25-32
• /
• 1970

This experiment was conducted to find out the simultaneous control effect of granulated insecticides on the several major rice insect pests in Korea. The granulated insecticides used were Terracur P$5\%$ (one of the phosphoric insecticides), Lebaycid $5\%$, and Sang-gamma (gamma-BHC) $6\%$. Those insecticides were broadcasted by hand on the paddy field at the ratio of 3kg. in June and 4kg. in August per 10 a, and the date of insecticidal application was based on the maximum moth occurrence of the rice stem borer in 1969. The rice insect pests tested in this study were rice stem borer (Chilo suppressalis W.), green rice leafhopper (Nephotettix bipunctatus cincticeps U.), smiller brown planthopper (Laodelphax striatellus F.), and white back planthopper (Sogotella furcifera H.). For the study of residual effectiveness of the insecticides, the rice stem borer larvae just hatched from the eggs were installed on the sheath of rice plants collected from the paddy field after insecticidal treatment, and the mortality was made at 48 hours after installation. High mortality was observed in Terracur P and Sang-gamma treatments and low mortality in Lebaycid treatment. The duration of residual effects giving about 50% mortality was about 14 days in Sang-gamma and about 6 days in Terracur P treatments. The study on the effectiveness of the insecticides to the rice stem borer in the paddy field was made by the number of dead blades and white heads of the rice plants injured by the larvae, and the number of survival larvae in the straws after crop harvest. The order of insecticidal effectiveness to the rice stem borer was Terracur P=Sang-gamm>Lebaycid. The study on the effectiveness of the insecticides to the leafhoppers and planthoppers in the paddy field was made by the population density by sweeping (5 times) at the given day intervals after treatments. Terracur P was highly effective for the control of the green rice leafhoppers and Lebaycid was moderately effective, but Sang-gamma seemed not to be effective. The effectiveness of the insecticides tested to the planthoppers was not clear, and it seemed to related with the low insect population density. Study on the determination of proper timing of insecticidal application was not also made clear, and it seemed to be short in the range of day intervals in the insecticidal application. For the study on the control effects of the rice insect pests, rice yield per 100 hills per plot was observed. There was no statistically significant difference among the treatments in rice yields, but the order of yield (Terracur P>Sang-gamma>Lebaycid>Control) was paralleled with the tends of control effects above mentioned. In a view point of simultaneous control of the rice stem borers and green rice leafhoppers by the application of granulated insecticides, Terracur P and Lebaycid were more effective than Sang-gamma which have been used.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.12-23
• /
• 2009

To verify hybridity of Asplenium castaneo-viride, external morphology, spore morphology, anatomy and chromosomes of the species and of the two presumed parental species, A. incisum and A. ruprechtii, were examined. A. castaneo-viride usually had 1-pinnately divided frond. However, some individuals had almost simple fronds with pinnatisect basal parts similar to A. ruprechtii, while others had fronds similar to A. incisum in having oblanceolate blades and basal pinnae with triangular, 2-3 lobed apices. On the surface of the spores, sculpturing consisted of folds that were usually prominent; forming long wings, and irregular or incomplete reticulation. However, reticulation patterns varied among species. A. castaneo-viride showed a wide range of variation from sparse to dense patterns, whereas A. incisum showed only from sparse to intermediate patterns. A. ruprechtii showed from intermediate to dense patterns. The spore size of A. castaneo-viride was $54.63{\mu}m$, larger than other two species ($47.81{\mu}m$ in A. incisum and $44.22{\mu}m$ in A. ruprechtii). The level of undulation of epidermal cell wall was also different. A. incisum had the most shallowly undulated wall, and A. castaneo-viride had a pattern intermediate between the two presumed parental species. This same patterns was recognized in the density of stomata. The density of $45.91/mm^2$ in A. castaneo-viride was intermediate between the two presumed parental species ($67.00/mm^2$ in A. incisum, and $37.86/mm^2$ in A. ruprechtii). Chromosome number was constant (2x =2n = 72) as in A. incisum and A. ruprechtii. However, A. castaneo-viride showed a different ploidy level. The populations of Mt. Mai (Jeonbuk province) and Mt. Duryun (Jeonnam province) were diploid (2n = 72) which is a new record for this taxon, whereas the population of Mt. Buram (Seoul) was tetraploid (2n = 144). Conclusively, A. castaneo-viride was revealed to be a hybrid of A. ruprechtii and A. incisum based on evidence involving leaves, spores, epidermal cells, stomata and chromosome number.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.52-68
• /
• 1991

A new propeller series is developed using the newly developed blade section(KH18 section) which behaves better cavitation characteristics and higher lift-drag ratio at wide range of angle-of-attack. The pitch and camber distributions are disigned in order to have the same radial and chordwise loading distribution with the selected circumferentially averaged wake input. Since the geometries of the series propeller, such as chord length, thickness, skew and rate distribations, are selected by regression of the recent full scale propeller geometric data, the performance prediction of a propeller at preliminary design stage can be mure realistic. Number of blades of the series propellers is 4 and the expanded blade area ratios are 0.3, 0.45, 0.6 and 0.75. Mean pitch ratios are selected as 0.5, 0.65, 0.8, 0.75 and 1.1 for each expanded area ratio. The new propeller series is composed of 20 propellers and is named as KD(KRISO-DAEWOO) propeller series. Propeller open water tests are performed at the experimental towing tank, and the cavitation observation tests and fluctuating pressure measurements are carried out at the cavitation tunnel of KRISO. $B_{P}-\delta$ curves, which can be used to select the optimum propeller diameter at the preliminary design stage, are derived from a regression analysis of the propeller often water test results. The KD-cavitation chart is derived from the cavitation observation test results by choosing the local maximum lift coefficient and the local cavitation number as parameters. The caviy extent of a propeller can be predicted more accurately by using the KD-cavitation chart at a preliminary design stage, since it is derived from the results of the cavitation observation tests in the selected ship's wake, whereas the existing cavitation charts, such as the Burrill's cavitation chart, are derived from the test results in uniform flow.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.243-249
• /
• 2019

A barley(Hordeum vulgare L.) cultivar 'Youjin' with hooded spike type having good silage quality was developed at National Institute of Crop Science, RDA in 2016. 'Youjin' showed both high yielding and cold resistance through the preliminary and advanced yield trials(PYT, AYT) from 2012 to 2013. We conducted regional yield trials(RYT) of 'Youjin' in six locations around Korea for three years from 2014 to 2016. It had erect plant type, growth habit of II, the green leaf and hooded awn type. In the paddy field its heading date was April 24 and the maturing date was May 25. Plant height was 99 cm and the number of spikes per ㎡ was 696. It has high rate of leaf blades, resistance to BaYMV(Barley Yellow Mosiac Virus) and good winter hardiness. The average dry matter of Youjin was about 17.2 MT ha^-1 in the field. And feed quality of 'Youjin' was 10.6% of crude protein content, 24.8% of ADF(Acid Detergent Fiber), 43.5 % of NDF(Neutral Detergent Fiber), 69.1% of TDN(Total Digestible Nutrients). And also 'Youjin' had grade I of silage quality.