• 방송공학회논문지
• /
• 제15권4호
• /
• pp.555-562
• /
• 2010

DTV 방송이 개시된 이후로 방송망의 비디오, 오디오 및 채널 정보들을 제외한 나머지 대역폭에 부가 정보를 전송하여 데이터 방송 등과 같은 서비스를 제공하고자 하는 노력이 있었다. 최근에는 이러한 대역폭에 장시간 동안 VOD 콘텐츠를 전송하여 수신기에 저장시키는 방법으로 콘텐츠를 제공하는 Push-VOD 서비스가 주목을 받고 있으며, ATSC에서도 NRT(Non-Real-Time)[1]라는 이름으로 해당 전송 방법을 규격화하는 작업을 진행하고 있다. 그러나 이러한 방식으로 콘텐츠를 전송할 때 DTV 수신환경이나 수신기의 문제 등으로 인해 한 번의 전송만으로는 콘텐츠가 에러없이 전송되지 않을 확률이 높다. 따라서 이를 극복하기 위해서는 방송망의 단방향적 특성상 콘텐츠를 여러 번 반복 전송하여 전송 신뢰도를 높여야 한다. 본 논문에서는 단방향 전송환경인 방송망으로 제한된 시간 내에 여러 콘텐츠를 수신기로 전송하고자 할 때, 마르코프 연쇄 모델링과 동적 계획 기법을 이용하여 전송된 콘텐츠들의 에러를 최소화하는 콘텐츠들의 최적 반복 전송 횟수를 구하는 방법을 제안한다.

• The Journal of the Acoustical Society of Korea
• /
• 제23권1E호
• /
• pp.3-9
• /
• 2004

An important inverse problem in the field of acoustics is that of reconstructing the strengths of a number of sources given a model of transmission paths from the sources to a number of sensors at which measurements are made. In dealing with this kind of the acoustical inverse problem, strengths of the discretised source distribution can be simply deduced from the measured pressure field data and the inversion of corresponding matrix of frequency response functions. However, deducing :he solution of such problems is not straightforward due to the practical difficulty caused by their inherent ill-conditioned behaviour. Therefore, in order to overcome this difficulty associated with the ill-conditioning, the problem is replaced by a nearby well-conditioned problem whose solution approximates the required solution. In this paper a microphone array are identified for which the inverse problem is optimally conditioned, which can be robust to contaminating errors. This involves sampling both source and field in a manner which results in the discrete pressures and source strengths constituting a discrete Fourier transform pair.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.689-696
• /
• 1996

A comparison is made of the heat loss from a hollow cylinder, computed using an one-dimensional analytic method and a two-dimensional separation of variables scheme. For a two-dimensional analysis, the temperature of the inner surface as a boundary condition can be varied along the length of the cylinder by varing the temperature variation factor, b. Comparisons of the heat loss from the hollow cylinder using these two methods are given as a function of non-dimensional cylinder length, the ratio of the outer radius to the inner radius, temperature variation factor and Biot number. The result shows that the value of the heat loss from the hollow cylinder obtained using the one-dimensional analytic method becomes close to the value given by the two-dimensional separation of variables scheme as the value of Biot number and the non-dimensional hollow cylinder length increase and as the ratio of the outer radius to the inner radius decreases.

• 대한수학회논문집
• /
• 제38권2호
• /
• pp.431-450
• /
• 2023

The basic goal of quantization for probability distribution is to reduce the number of values, which is typically uncountable, describing a probability distribution to some finite set and thus to make an approximation of a continuous probability distribution by a discrete distribution. It has broad application in signal processing and data compression. In this paper, first we define the uniform distributions on different curves such as a line segment, a circle, and the boundary of an equilateral triangle. Then, we give the exact formulas to determine the optimal sets of n-means and the nth quantization errors for different values of n with respect to the uniform distributions defined on the curves. In each case, we further calculate the quantization dimension and show that it is equal to the dimension of the object; and the quantization coefficient exists as a finite positive number. This supports the well-known result of Bucklew and Wise [2], which says that for a Borel probability measure P with non-vanishing absolutely continuous part the quantization coefficient exists as a finite positive number.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1464-1478
• /
• 2021

Selective Production of Exotic Species is an innovative plant for advanced nuclear physic studies. A radioactive beam, generated by using an UCx target-ion source system, is ionized, selected and accelerated for experimental objects. Very high vacuum conditions and appropriate safety systems to storage exhaust gases are required to avoid radiological risk for operators and people. In this paper, Failure Mode, Effects, and Criticality Analysis of a preliminary design of high activity gas recovery system is performed by using a modified Fuzzy Risk Priority Number to rank the most critical components in terms of failures and human errors. Comparisons between fuzzy approach and classic application allow to show that Fuzzy Risk Priority Number is able to enhance the focus of risk assessments and to improve the safety of complex and innovative systems such as those under consideration.

• 대한산업공학회지
• /
• 제30권2호
• /
• pp.84-92
• /
• 2004

A process control procedure is proposed when 100% inspection is performed in a process with excellent capability. Only the incomplete measurement data is assumed to be available, i.e. the specific measurement value of the quality characteristic is not available for each item but it can be determined to be smaller or larger than any prescribed value. In the suggested model, a signal limit is introduced to determine whether the process under study is in control or not. If the quality characteristic of an incoming item exceeds the upper signal or the lower signal limit, the process is determined to be stopped or not by comparing the number of consecutively accepted items with a predetermined threshold number. The procedure is designed based on the type I and II errors. The performance of the model is evaluated by the expected number of items produced under the in-control and out-of-control states until the process is stopped.

• 천문학회지
• /
• 제34권4호
• /
• pp.321-323
• /
• 2001

Compressible, magnetohydrodynamic (MHD) turbulence in two dimension is studied through high-resolution, numerical simulations with the isothermal equation of state. First, hydrodynamic turbulence with Mach number $(M)_{rms}\;\~$1 is generated by enforcing a random force. Next, initial, uniform magnetic field of various strengths with Alfvenic Mach number Ma $\gg$ 1 is added. Then, the simulations are followed until MHD turbulence is fully developed. Such turbulence is expected to exist in a variety of astrophysical environments including clusters of galaxies. Although no dissipation is included explicitly in our simulations, truncation errors produce dissipation which induces numerical resistivity. It mimics a hyper-resistivity in our second-order accurate code. After saturation, the resulting flows are categorized as SF (strong field), WF (weak field), and VWF (very weak field) classes respectively, depending on the average magnetic field strength described with Alfvenic Mach number, $(Ma)_{rms}{\ge}1$, $(Ma)_{rms}{\~}1$, and $(Ma)_{rms}{\gg}1$. The characteristics of each class are discussed.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.421-427
• /
• 2008

UV disinfection is widely used in water treatment facilities and wastewater treatment plant because of its effectiveness to removal of pathogen and Giardia which is resistant to traditional chemical disinfection. As a design and performance tool of UV disinfection system, 3 dimensional UV intensity models were composed and simulated to compare each other and to find affecting factors in this study. Reflection, refraction and absorption are important parameters in UV intensity model and MPSS and MSSS model can reflect these parameters while LSI model can not. Absorption is the most important parameters among the reflection, refraction, absorption and shadowing so, this should not be neglect. Based on this simulation, shadowing effect is negligible when the number of installed lamp is a few but, this effect can not be neglectable when the number of installed lamp is quite a few. The errors according to shadowing effect is increased as the number of lamp installed increased.

• Genomics & Informatics
• /
• 제12권4호
• /
• pp.136-144
• /
• 2014

Besides single-nucleotide variants in the human genome, large-scale genomic variants, such as copy number variations (CNVs), are being increasingly discovered as a genetic source of human diversity and the pathogenic factors of diseases. Recent experimental findings have shed light on the links between different genome architectures and CNV mutagenesis. In this review, we summarize various genomic features and discuss their contributions to CNV formation. Genomic repeats, including both low-copy and high-copy repeats, play important roles in CNV instability, which was initially known as DNA recombination events. Furthermore, it has been found that human genomic repeats can also induce DNA replication errors and consequently result in CNV mutations. Some recent studies showed that DNA replication timing, which reflects the high-order information of genomic organization, is involved in human CNV mutations. Our review highlights that genome architecture, from DNA sequence to high-order genomic organization, is an important molecular factor in CNV mutagenesis and human genomic instability.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.34-41
• /
• 2013

We develop a novel immersed boundary (IB) method based on implicit direct forcing scheme for incompressible flows. The proposed IB method is based on an iterative procedure for calculating the direct forcing coupled with the momentum equations in order to satisfy no-slip boundary conditions on IB surfaces. We perform simulations of two-dimensional flows over a circular cylinder for low and moderate Reynolds numbers. The present method shows that the errors for estimated velocities on IB surfaces are significantly reduced even for low Reynolds number with a fairly large time step while the previous methods based on direct forcing failed to provide no-slip boundary conditions on IB surfaces.