• The Journal of Korean Society for School & Community Health Education
• /
• v.2 no.2
• /
• pp.1-22
• /
• 2001

The purpose of this study was to evaluate the effect of moderate physical exercise program on a number of immune parameters in middle school boys($15.07{\pm}0.39$ yrs). 14 volunteers were included in this physical exercise program. They were randomly assigned to an experiment(7) and a control(7) group. Measurements were taken before program, after 4 weeks and 8 weeks of aerobic exercise for immune parameters such as number of circulating leukocytes, concentration of WEC subsets, lymphocyte subsets, immunoglobulins, complements, and number of blood adipose components. Aerobic exercise consisted of track running at a work intensity of 65% HRmax, $45{\sim}55$ min per day, 3 times per week, and for 8 weeks. The results are as follows; 1. There were no significant changes between and within groups in the number of circulating leukocytes and concentration of WEC subsets. 2. There were significant(p<.05) changes in concentration of B-cell between groups, and T-cell, helper T-cell, and B-cell within experimental group. 3. There were no significant changes between and within groups in concentration of complements. 4. There were significant(p<.05) changes in concentration of IgG between groups and within experimental group. 5. There were significant(p<.05) changes in concentration of TG between groups, and TG, HDL-C and LDL-C within experimental group. In conclusion, the moderate exercise training for 8 weeks can be beneficial on immune function and decrease the concentration of flood adipose components in adolescents.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.290-296
• /
• 2004

The effects of potassium, sodium, calcium, magnesium, and iron on cyanobacterial bloom potentials were investigated in Daechung Reservoir, Korea. Potassium showed the highest correlation with the cyanobacterial cell number (r=0.487, P<0.05) and phycocyanin concentration (r=0.499, P<0.05). However, it was not likely that the potassium had directly affected the bloom formation, because the variations of its concentration were not significantly large. In contrast, the Fe concentration fluctuated drastically and exhibited a negative correlation with the cyanobacterial cell number (r=- 0.388, P<0.1) and phycocyanin concentration (r=-0.446, P<0.05). Accordingly, the K:Fe atomic ratio would appear to reflect the extent of cyanobacterial bloom more precisely than K or Fe alone. The K:Fe ratio specifically correlated with cyanobacterial percentage, the cyanobacterial cell number and phycocyanin concentration (r=0.840, P<0.001; r=0.416, P<0.05; r=0.522, P<0.01, respectively). With the K:Fe atomic ratio of over 200, the chlorophyll-a concentration, cyanobacterial cell number, and phycocyanin concentration exceeded $10\mu$g $1^{-1}$20,000 cells $ml^{-1}$, and 20 pM, respectively, the general criteria of eutrophic water.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.2
• /
• pp.90-98
• /
• 2011

Objectives: The aim of this study was to evaluate the level of urinary mercury and analyze which factors would affect urinary mercury concentration among dental hygienists in dental clinics. Methods: This study conducted by questionnaire and detection of urinary mercury concentration of 268 dental hygienists working in dental clinics from July to August of 2009. Data collected from two hundred and thirty-five dental hygienists were analyzed by the geometric mean (GM). Analytical results of urine samples with less than 0.3 g creatinine/L and greater than 3g creatinine/L were excluded from statistical analysis. Results: Urinary mercury concentration of 235 dental hygienists showed the geometric distribution. The arithmetic and geometric means of urinary mercury concentration were $0.996{\mu}g/g$ creatinine and $0.755{\mu}g/g$ creatinine, respectively. From multiple regression analysis, the number of amalgam filling, the consumption frequency of raw fish and the number of amalgam handling in current workplace was revealed as increasing factors of urinary mercury concentration. Conclusions: The level of urinary mercury in dental hygienists was higher than in general Korean population. The number of amalgam filling, the consumption frequency of raw fish and the number of amalgam handling in current workplace was revealed as increasing factors of urinary mercury concentration. Therefore using resin materials instead of amalgam in dental clinics is highly desirable.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.447-457
• /
• 2014

The number concentrations, the mass concentrations and the elemental concentrations of $PM_{10}$ have measured at Gosan site in Jeju, Korea, from March 2010 to December 2010. And the correlation and the factor analysis for the number, the mass and the elemental concentrations of $PM_{10}$ are performed to identify their relationships and sources. The average $PM_{10}$ number concentration is observed $246\;particles/cm^3$($35.7{\sim}1,017\;particles/cm^3$) and the average $PM_{10}$ mass concentration is shown $50.1{\mu}g/m^3$($16.7{\sim}441.4{\mu}g/m^3$) during this experimental period. The number concentrations are significantly decreased with increasing particle size, hence the concentrations for the smaller particles less than $2.5{\mu}m$($PM_{2.5}$) are contributed 99.6% to the total $PM_{10}$ number concentrations. The highest concentration of the 20 elements in $PM_{10}$ determined in this study is shown by S with a mean value of $1,497ng/m^3$ and the lowest concentration of them is found by Cd with a mean value of $0.57ng/m^3$. The elements in $PM_{10}$ are evidently classified into two group based on their concentrations: In group 1, including S>Na>Al>Fe>Ca>Mg>K, the elemental mean concentrations are higher than several hundred $ng/m^3$, on the other hand, the concentrations are lower than several ten $ng/m^3$ in group 2, including Zn>Mn>Ni>Ti>Cr>Co>Cu>Mo>Sr>Ba>V>Cd. The size-separated number concentrations are shown positively correlated with the mass concentrations in overall size ranges, although their correlation coefficients, which are monotonously increased or decreased with size range, are not high. The concentrations of the elements in group 1 are shown highly correlated with the mass concentrations, but the concentrations in group 2 are shown hardly correlated with the mass concentrations. The elements originated from natural sources have been predominantly related to the mass concentrations while the elements from anthropogenic sources have mainly affected on the number concentrations of $PM_{10}$.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.581-589
• /
• 2003

Film absorption involves simultaneous heat and mass transfer in the gas-liquid system. While the non-absorbable gas does not participate directly In the absorption process. its pretence does affect the overall heat and mass transfer. An experimental study was performed to investigate the heat and mass transfer characteristics of LiBr-H$_2$O solution flow ing over 6-row horizontal tubes with the water vapor absorption in the pretence of non-absorbable gases. The volumetric concentration of non-absorbable gas, air, was varied from 0.17 to 10.0%. The combined effects of the solution flow rate and its concentration on the heat and mass transfer coefficients were also examined. The presence of 2％ volumetric concentration of air resulted in a 25% reduction in the Nusselt number and 41% reduction in the Sherwood number Optimum film Reynolds number was found to exist at which the heat and mass transfer reach their maximum value independent of air contents. Reduced Nusselt and Sherwood numbers. defined as the ratio of Nusselt and Sherwood numbers at given non-absorbable gas content to that with pure water vapor, were correlated to account for the reduction in the heat and mass transfer due to non-absorbable gases in a falling film absorption process.

• Atmosphere
• /
• v.22 no.1
• /
• pp.97-107
• /
• 2012

To investigate variation of aerosol number concentration at each different size with three-dimensional (3D) wind components in ocean area, aerosol particles and 3D wind components were measured in the Ieodo Ocean Research Station, which is located to 419 km southwest from Marado, the southernmost island of Korea, from 25 June to 8 July 2010. The Laser Particle Counter (LPC) and ultrasonic anemometer were used to measure the size of aerosol particles and 3D wind components (zonal (u), meridional (v), and vertical (w) wind) respectively. Surface weather chart, NCEP/NCAR reanalysis data and sounding data were used to analyze the synoptic condition. The distribution of aerosol number concentration had a large variation from bigger particles more than 1.0 ${\mu}m$ in diameter by wind direction during precipitation. In the number concentration of aerosol particles with respect to the weather conditions, particles larger than 1.0 ${\mu}m$ in size were decreased and sustained to the similar concentration at smaller particles during precipitation. The increase in aerosol number concentration was due to the sea-salt particles which was suspended by southwesterly and upward winds. In addition, the aerosol number concentration with vertical wind flow could be related with the occurrence and increasing mechanism of aerosol in marine boundary layer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.10-26
• /
• 2013

To understand the traffic emissions with high temporal and spatial resolutions on road, a mobile laboratory was developed. The objective of this study is to characterize on-road air pollution on Naebu express way surrounding the northern area of Seoul, Korea. We measured the number concentration of ultrafine particles larger than 5 nm and particle size distribution using a condensation particle counter and a fast mobility particle sizer, respectively on 3, 7, and 8 December 2009. The average ultrafine particle number concentration on the Naebu express way excluding tunnels was 126,000 particles/$cm^3$ and 4.2 times higher than that on internal road at Korea Institute of Science and Technology in Seoul, and more than twice higher than that measured on and at the arterial roads of Seoul in previous studies. The maximum ultrafine particle number concentration was observed at the tunnel sections. It was 232,000 particles/$cm^3$ and 1.8 times higher than average ultrafine particle number concentration for the other sections on Naebu express way. The ultrafine particle number concentration on the wider roads with higher traffic volume along the Han River was similar to that in the residential section, probably because of enhanced dilution effect in widely open environment. The size distribution of particles on the Naebu express way was highly fluctuated for a short duration. Ultrafine particles measured at the tunnel showed a bimodal size distribution with mode diameters of ~10 nm and ~50 nm. At the Han riverside section, ~10 nm particles appeared significantly compared with size distribution at the tunnel. This on-road measurement approach can be utilized to manage vehicle-related air pollution in urban area.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1062-1068
• /
• 2002

In our previous study, it was proven that the mean size and the total number concentration of carbon soot particles emitted from a $C_2$H$_4$ normal diffusion flame decreased when a DC corona was discharged to pin-pin electrodes. In this work the effect of AC corona discharge on soot emission was investigated and compared with that of DC corona discharge. For the pin-pin electrodes the size of soot particles and the number concentration decreased by the AC voltage. There were only slight changes in size distribution with frequencies, while the magnitude of applied voltage was constant. When the electric field was applied to plate-plate electrodes, the size and the number concentration also decreased with the applied AC voltages. For applied voltages above 2kV the effect of frequency increase on the soot emission was effective.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.489-498
• /
• 1998

Among the heat/mass exchange units composing an absorption system, the absorber, where the refrigerant vapor is absorbed into the liquid solution is the one least understood. In the present study, the effects of non-absorbable gas on the absorption process of aqueous lithium bromide solution falling film inside a vertical tube were experimentally investigated. In the range of film Reynolds number of 30 ~ 195, heat and mass transfer characteristics were investigated as a function of non-absorbable gas volumetric concentration, 0.2 ~ 20%. An increase of non-absorbable gas volumetric concentration degraded the mass transfer rate dramatically in the absorption process. The reduction of mass transfer rate was significant for the addition of small amount of non-absorbable gas to the pure vapor. At film Reynolds number of 130, an increase of non-absorbable gas concentration from 0.2 to 6.0% resulted in the decrease of mass transfer rate by 36% and 20% of non-absorbable gas by 59%. However the decrease of film Nusselt number with the increase of volumetric concentration of non absorbable gas was relatively smaller than the decrease of Sherwood number. Critical film Reynolds number was identified to exist for the maximum heat and mass transfer regardless of the volumetric concentration of non-absorbable gases.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.587-595
• /
• 2018

This research investigated the characteristics of NO and $NO_2$ concentration at roadside (Choryangdong) and residential (Sujeongdong) locations in Busan. The NO concentration at roadside and residential were 34.7 and 8.0 ppb, respectively, and $NO_2$ at roadside and residential were 31.6 and $18.0ppb\;{\mu}g/m^3$, respectively. The NO concentration was the highest in winter at roadside at 37.1 ppb, followed by 35.0 ppb and 34.0 ppb in summer and fall, respectively. $NO_2$ concentration was the highest in spring at roadside at 39.6 ppb, followed by 30.4 ppb and 28.3 ppb in fall and winter, respectively. Number of exceedances per year of 1 hr limit value (0.10 ppm) for $NO_2$ at roadside and residential were 3,585 and 3 hours, respectively. Number of exceedances per year of 24 hr limit value (0.06 ppm) for $NO_2$ at roadside and residential were 32 and 1 days, respectively. Number of exceedances per year of 1 hr limit value (0.1 ppm) for $O_3$ at roadside and residential were 1 and 14 days, respectively. These results indicated that understanding the relationship between roadside and residential could provide insight into establishing a strategy to control urban air quality.