• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3617-3627
• /
• 2023

This study presents a method to solidify spent ion-exchange resin (IER) in a metakaolin-based geopolymer and shows results of mechanical strength, immersion, leaching, irradiation, and thermal cycling tests for waste acceptance criteria (WAC) to repository. The geopolymer waste form with 20 wt% of simulated spent IER met the WAC in South Korea (ROK), and the leaching tests of various sized-waste forms up to 15.0 × 30.0 cm and waste loadings up to 20 wt% for 1-5 d and 1-90 d achieved a leachability index, L_i > 6. In a leaching test for 5 d, the cumulative fraction leached (CFL) for Cs, which leached the most, was linearly correlated with the square root of leaching time for all waste forms, and L_i increased as the size of the waste form increased. The CFL was also correlated with elapsed time in the 90 d leaching test. The correlations among CFL, time, and volume-to-surface area ratio of waste forms used to estimate the L_i of Cs of a 200-L sized geopolymer with 15 wt% IER showed the L_i values as 14.73 (5 d) and 17.71 (90 d), respectively, indicating that the large-sized geopolymer waste form met the WAC.

• 방사성폐기물학회지
• /
• 제21권4호
• /
• pp.451-463
• /
• 2023

With South Korea increasingly focusing on nuclear energy, the management of spent nuclear fuel has attracted considerable attention in South Korea. This study established a novel procedure for selecting safety-relevant radionuclides for long-term safety assessments of a deep geological repository in South Korea. Statistical evaluations were performed to identify the design basis reference spent nuclear fuels and evaluate the source term for up to one million years. Safety-relevant radionuclides were determined based on the half-life criteria, the projected activities for the design basis reference spent nuclear fuel, and the annual limit of ingestion set by the Nuclear Safety and Security Commission Notification No. 2019-10 without considering their chemical and hydrogeological properties. The proposed process was used to select 56 radionuclides, comprising 27 fission and activation products and 29 actinide nuclides. This study explains first the determination of the design basis reference spent nuclear fuels, followed by a comprehensive discussion on the selection criteria and methodology for safety-relevant radionuclides.

• 방사성폐기물학회지
• /
• 제1권1호
• /
• pp.41-46
• /
• 2003

심부 처분환경조건에서 붕규산유리고화체의 장기침출거동을 규명하기 위하여 3종의 모의붕규산유리고화체에 대한 장기침출실험이 1997년에 착수되었다. 5년간의 침출결과는 붕소가 본 붕규산유리고화체의 장기침출지표물질로 사용될 수 있음을 확인시켜 주었고, 비록 고화체들의 조성은 약간씩 다르지만, 초기 1년여 기간동안의 침출률을 제외한 장기침출률은 S/V에도 무관하게 0.03g/$m^2$-day 에 근접하는 경향을 보여주고 있다.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1100-1107
• /
• 2024

The nuclear waste attributes of near-term deployable SMRs were assessed using established nuclear waste metrics, which are the DU mass, SNF mass, volume, activity, decay heat, radiotoxicity, and decommissioning LLW volumes. Metrics normalized per unit electricity generation were compared to a reference large PWR. Three SMRs, VOYGR, Natrium, and Xe-100, were selected because they represent a range of reactor and fuel technologies and are active designs deployable by the decade's end. The SMR nuclear waste attributes show both some similarities to the PWR and some significant differences caused by reactor-specific design features. The DU mass is equivalent to or slightly higher than the PWR. Back-end waste attributes for SNF disposition vary, but the differences have a limited impact on long-term repository isolation. SMR designs can vary significantly in SNF volume (and thus heat generation density). However, these differences are amenable to design optimization for handling, storage, transportation, and disposal technologies. Nuclear waste attributes from decommissioning vary depending on design and decommissioning technology choices. Given the analysis results in this study and assuming appropriate waste management system and operational optimization, there appear to be no major challenges to managing SMR nuclear wastes compared to the reference PWR.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.17-36
• /
• 2010

In this study, we compare the mass release rates of radionuclides(1) from waste forms arising from the KIEP-21 pyroprocessing system with (2) those from the directly-disposed pressurized-water reactor spent fuel, to investigate the potential radiological and environmental impacts. In both cases, most actinides and their daughters have been observed to remain in the vicinity of waste packages as precipitates because of their low solubility. The effects of the waste-form alteration rate on the release of radionuclides from the engineered-barrier boundary have been found to be significant, especially for congruently released radionuclides. the total mass release rate of radionuclides from direct disposal concept is similar to those from the pyroprocessing disposal concept. While the mass release rates for most radionuclides would decrease to negligible levels due to radioactive decay while in the engineered barriers and the surrounding host rock in both cases even without assuming any dilution or dispersal mechanisms during their transport, significant mass release rates for three fission-product radionuclides, $^{129}I$, $^{79}Se$, and $^{36}Cl$, are observed at the 1,000-m location in the host rock. For these three radionuclides, we need to account for dilution/dispersal in the geosphere and the biosphere to confirm finally that the repository would achieve sufficient level of radiological safety. This can be done only after we have known where the repository site would by sited. the footprint of repository for the KIEP-21 system is about one tenth of those for the direct disposal.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.83-100
• /
• 1999

As disposal packaging concepts of spent fuels generated from the domestic NPP, two types, one is to package PWR and CANDU spent fuels in different containers and the other is to package them together, were proposed. The configuration of the containers and the layout of underground repository, such as the container spacing and the deposition tunnel spacing, were developed. The layout of underground repository satisfies the thermal constraint of the bentonite buffer surrounding disposal container, which should be lower than $100^{\circ}C$ in order to keep the physical and chemical properties of bentonite From the spent fuel packaging concepts and container emplacement methods, seven options were developed. With a typical pair-wise comparison methods, AHP, the most promising disposal concept was selected based on the technology Point of view.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.561-574
• /
• 2006

This study presents the results of an economic analysis for a comparison of the single layer and double layer alternatives with respect to a HLW-repository. According to a cost analysis undertaken in the Korean case, the single layer option was the most economical alternative. The disposal unit cost was estimated to be 222 EUR/kgU. In order to estimate such a disposal cost, an estimation process was sought after the cost objects, cost drivers and economic indicators were taken into consideration. The disposal cost of spent fuel differs greatly from general product costs in the cost structure. Product costs consist of direct material costs and direct labor and manufacturing overhead costs, whereas the disposal cost is comprised of construction costs, operating costs and closure costs. In addition, the closure cost is required after a certain period of time elapses following the building of a repository.

• 방사성폐기물학회지
• /
• 제2권2호
• /
• pp.105-112
• /
• 2004

고준위 방사성폐기물 처분장에서 적용하고 있는 다중 방벽의 한 부분인 처분 용기는 벤토나이트 완충재의 팽윤과 지압으로부터 폐기물을 역학적으로 안정하게 보호함과 동시에 일정 기간 방사성폐기물의 유출을 억제하는 역할을 한다. 처분용기의 건전성은 엄격한 재질 선정과 품질 보증을 통해 확보된다. 그러나 용기 제작 과정이나 수송 중 예상치 못한 사건으로 인해 불량 용기가 발생할 가능성이 있다. 본 논문에서는 이와 같은 경우 방사성폐기물로 인해 생태계에 미치는 환경 영향을 연간 개인 선량으로 평가하였다. 연구결과 일부 불량 처분 용기가 발생하더라도 현 평가에 사용한 입력 데이터 범위에서는, 국내 고준위 방사성폐기물 처분 개념이 방사선적 안전성을 확보할 수 있는 것으로 판명되었다.

• 방사성폐기물학회지
• /
• 제14권1호
• /
• pp.1-9
• /
• 2016

In this study, thermal-hydrological-chemical modeling for the alteration of a bentonite buffer is carried out using a simulation code TOUGHREACT. The modeling results show that the water saturation of bentonite steadily increases and finally the bentonite is fully saturated after 10 years. In addition, the temperature rapidly increases and stabilizes after 0.5 year, exhibiting a constant thermal gradient as a function of distance from the copper tube. The change of thermal-hydrological conditions mainly results in the alteration of anhydrite and calcite. Anhydrite and calcite are dissolved along with the inflow of groundwater. They then tend to precipitate in the vicinity of the copper tube due to its high temperature. This behavior induces a slight decrease in porosity and permeability of bentonite near the copper tube. Furthermore, this study finds that the diffusion coefficient can significantly affect the alteration of anhydrite and calcite, which causes changes in the hydrological properties of bentonite such as porosity and permeability. This study may facilitate the safety assessment of high-level radioactive waste repositories.

• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.78-89
• /
• 1994

콘크리트 구조물과 점토성 되메움재로 구성된 중저준위 방사성폐기물처분장 인공방벽으로 부터의 핵종유출률이 평가되었다. 네 종류의 유출경로가 고려되었으며, 각 유출경로가 방사성핵종의 총유출률에 미치는 영향이 분석되었다. 입력변수 간의 불확실도가 핵종유출률 분석에 미치는 영향을 정량화하기 위해 Latin Hypercube 표본추출 방법이 이용되었으며, 그 결과 얻어진 유출률 분포는 적합도검증을 통하여 결정되었다. 마지막으로 최대유출률의 범위가 통계적방법에 의해 95% 신뢰도수준으로 추정되었다.