• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.82-87
• /
• 1999

The basic remote sleeve repair-welding technology by the pulsed Nd:YAG laser for increasing the lifetime of the steam generator tube in a nuclear power plant has been developed. The relationship between the connection width and welding parameters have been investigated for the fundamental research to apply the sleeve-repair-welding technique to the nuclear industry. The Inconel 600 tube and Inconel 690 sleeve used for high temperature and high pressure service were welded as round lap welding by Nd:YAG laser. It was observed that the tensile shear strength, 340MPa of the welded specimen is equivalent to about 60% of that of the base metal (Inconel 600), 550MPa. The difference between the hardness of the base metal and that of the laser welds was about 10%. Ductile fracture was partly occurred in the weld but the cracking has not been observed. In spite of absence of the crack, the strength of welds was not sufficient in terms of the tensile shear strength.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.490-499
• /
• 1989

본 연구에서의 CO$_{2}$ 프로세스는 1차 루프인 원자로에서 유도되는 나트륨 과 2차 루프인 CO$_{2}$ 가스터빈 사이클로 구성하였고, CO$_{2}$ 임계점 부근에서 압축을 행하였다. 또한 최적의 사이클을 결정하기 위해 h-s 선도와 이에 대한 열역 학적, 칼로리로 유도하였다. 그리고 최적화를 위해 출력을 각각 300,600, 1000MWe로 선택하였고, 터빈 입구압은 150-350bar의 범위로 선택하였으며 이들로부터 열효율에 영향을 주는 각 설계변수의 특성을 연구 분석하였다.

• 한국재료학회지
• /
• 제8권8호
• /
• pp.726-732
• /
• 1998

가압 경수로형 원전에 사용되는 Alloy 600 증기발생기 전열관재료의 입계응력부식균열 거동에 미치는 냉간변형의 영향을 1차 냉각수 모사조건에서 정속인장시험방법으로 조사하였다. 인장 냉간변형은 응력부식균열을 크게 가속화 시키지는 않았으며 변형량이 25%이상인 경우에는 응력부식균열이 발생하지 않았다. 이 현상은 냉간 변형량 및 형태에 따른 미소변형 및 응력의 불균질성에 영향을 받는 것으로 사려되며 응력의 크기는 직접적인 영향을 주지 않는 것으로 보인다. 국부적인 큰 응력구배가 존재하는 경우 균열의생성 및 성장이 현저히 가속화되었는데 이는 원전 1차측 응력부식균열 기구가 응력구배에 의존하는 과정과 연관되어 있다는 증거이다. Hump 시편을 이용한 정속인장시험방법은 짧은 실험기간내에 원전 1차측 응력부식균열 특성을 평가할 수 있는 방법이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1008-1010
• /
• 2005

In the examination of steam generator(SG) tube in nuclear power plant, eddy current testing probes play an important role in detecting the defects. Bobbin probe and MRPC probe is usually used for the inspection of SG tube. Bobbin probe is good at high speed inspection, but ability of detection of circumferential defect is very weak. On the contrary MRPC probe, which moves for inspection in the direction of axial and circumferential simultaneously, has very slow inspection speed, but it has excellent detection capability for small cracks, which is hardly detected by bobbin probe. In this paper, for the accurate analysis of experimental ECT signals, construction of MRPC probe signals database according to the variation of defect size is the main purpose. Using 3-D finite element method, ECT signals are analyzed, and signals analysis add according to frequency ingredient. The results, which are analysis and characteristics ion of electromagnetism simulation signals, is databased.

• Nuclear Engineering and Technology
• /
• 제32권5호
• /
• pp.433-445
• /
• 2000

The interfacial area concentration (IAC) is one of the most important parameters in the two-fluid model for two-phase flow analysis. The IAC can be measured by a local conductivity probe method that uses the difference of conductivity between water and air/steam. The number of sensors in the conductivity probe may be differently chosen by considering the flow regime of two-phase flow. The four sensor conductivity probe method predicts the IAC without any assumptions of the bubble shape. The local IAC can be obtained by measuring the three dimensional velocity vector elements at the measuring point, and the directional cosines of the sensors. The five sensor conductivity probe method proposed in this study is based on the four sensor probe method. With the five sensor probe, the local IAC for a given referred measuring area of the probe can be predicted more exactly than the four sensor probe. In this paper, the mathematical approach of the five sensor probe method for measuring the IAC is described, and a numerical simulation is carried out for ideal cap bubbles of which the sizes and locations are determined by a random number generator.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.690-703
• /
• 2010

Sampling based uncertainty analysis was carried out to quantify uncertainty in predictions of best estimate code RELAP5/MOD3.2 for a thermal hydraulic test (10% hot leg break LOCA) performed in the Large Scale Test Facility (LSTF) as a part of an IAEA coordinated research project. The nodalisation of the test facility was qualified for both steady state and transient level by systematically applying the procedures led by uncertainty methodology based on accuracy extrapolation (UMAE); uncertainty analysis was carried out using the Latin hypercube sampling (LHS) method to evaluate uncertainty for ten input parameters. Sixteen output parameters were selected for uncertainty evaluation and uncertainty band between $5^{th}$ and $95^{th}$ percentile of the output parameters were evaluated. It was observed that the uncertainty band for the primary pressure during two phase blowdown is larger than that of the remaining period. Similarly, a larger uncertainty band is observed relating to accumulator injection flow during reflood phase. Importance analysis was also carried out and standard rank regression coefficients were computed to quantify the effect of each individual input parameter on output parameters. It was observed that the break discharge coefficient is the most important uncertain parameter relating to the prediction of all the primary side parameters and that the steam generator (SG) relief pressure setting is the most important parameter in predicting the SG secondary pressure.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3225-3234
• /
• 2022

Alloy 690 tubing has been shown to be highly resistant to primary water stress corrosion cracking (PWSCC). Nevertheless, predicting the failure by PWSCC in Alloy 690 SG tubes is indispensable. In this work, a Bayesian-based statistical approach is proposed to predict the occurrence of failure by PWSCC in Alloy 690 SG tubing. The prior distributions of the model parameters are developed based on the prior knowledge or information regarding the parameters. Since Alloy 690 is a replacement for Alloy 600, the parameter distributions of Alloy 600 tubing are used to gain prior information about the parameters of Alloy 690 tubing. In addition to estimating the model parameters, analysis of tubing reliability is also performed. Since no PWSCC has been observed in Alloy 690 tubing, only right-censored free-failure life of the tubing are available. Apparently the inference is sensitive to the choice of prior distribution when only right-censored data exist. Thus, one must be careful in choosing the prior distributions for the model parameters. It is found that the use of non-informative prior distribution yields unsatisfactory results, and strongly informative prior distribution will greatly influence the inference, especially when it is considerably optimistic relative to the observed data.

• 한국유체기계학회 논문집
• /
• 제16권4호
• /
• pp.35-43
• /
• 2013

Most of the nuclear power plants(NPPs) adopts pressure difference type flow meters such as venturi and orifice meters for the measurement of feedwater flow rates to calculate reactor thermal power. However, corrosion products in the feedwater deposits on the flow meter by fouling as operating time goes. These effects lead to severe errors in the flow indication and then determination of reactor thermal power. The averaging BDFT, which has developed by Yun et al., has a potentiality to minimize this problem thanks to its inherent measurement principle. Therefore, it is expected that the averaging BDFT can replace the venturi meter for the feedwater pipe of steam generator of NPPs. The present work compares the amplification factor, K, based on CFD calculation against the K obtained from experiments in order to confirm whether a commercial CFD code can be applicable to the evaluation of characteristic for the averaging BDFT. In addition to this, the simulations to take into account of fouling effect are also carried out by rough wall option. The results show that the averaging BDFT is a promising flow meter for the accurate measurement of flow rates in the fouling condition of the NPPs.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.187-194
• /
• 2011

Korea Nuclear Fuel is developing the X-GEN fuel which shows high performance and robust reliability for the worldwide supply. However, the simplified code systems such as CESEC-III which were developed in 1970s are still used in the current Non-LOCA safety analysis of OPR1000 and APR1400 plants. Therefore, it is essential to secure an advanced safety analysis methodology to make the best use of the merits of X-GEN fuel. To accomplish this purpose, the $\b{i}$ntegrated $\b{s}$afety $\b{a}$nalysis $\b{m}$ethodology (iSAM), is developed by selecting the best-estimate thermal-hydraulic code RETRAN. iSAM possesses remarkable advantages, such as generality, integrity, and designer-friendly features. That is, iSAM can be applied to both OPR1000 and APR1400 plants and uses only one computer code, RETRAN, in the whole scope of the non-LOCA safety analyses. Also the iSAM adopts the unique and automatic initialization and run tool, $\b{a}$utomatic $\b{s}$teady-$\b{s}$tate $\b{i}$nitialization and $\b{s}$afety analysis too l (ASSIST), to enable unhandy designers to use the new design code RETRAN without difficulty. In this paper, a brief overview of the iSAM is given, and the results of applying the iSAM to typical non-LOCA transients being checked during the reload design are reported. The typical non-LOCA transients selected are the single control element assembly withdrawal (SCEAW) accident, the asymmetric steam generator transients (ASGT), the locked rotor (LR) accident, and bank CEA withdrawal (BCEAW) event. Comparison to current licensing results shows a close resemblance; thus, it reveals that the iSAM can be applied to the non-LOCA safety analysis of OPR1000 and APR1400 plants.

• Journal of Radiation Protection and Research
• /
• 제35권2호
• /
• pp.57-62
• /
• 2010

원전 계획예방정비기간 증기발생기 수실작업, 가압기 전열관교체 또는 압력관피더 제거작업 지역 등은 높은 방사선량률을 보이는 지역으로, 짧은 시간 동안의 작업으로 작업종사자는 높은 피폭을 받을 가능성이 있다. 특히, 방사성물질과 접촉하는 손 부위는 높은 피폭이 일어날 수 있다. 이런 점을 고려하여 국내 가압경수로원전과 가압중수로원전의 계획 예방정비기간 중 증기발생기 수실 노즐댐 설치와 제거작업, 원자로 냉각재펌프 보수작업, 원자로헤드 보수 및 검사작업 등과 같은 고피폭 접촉작업에서 방사선작업종사자의 말단선량을 측정하기위한 현장시험을 실시하였다. 여기에 참여한 작업종사자는 가슴과 등 부위에 일상적인 절차에 따른 복수선량계를 패용한 것 이외에 손목에 개인선량계를 추가로 패용하였고, 손가락 부위에는 말단선량계 (Extremity dosimeter)를 패용하였다. 그 결과, 손가락이 받는 등가선량은 각각 손목이 받는 등가선량 및 가슴 또는 등 부위가 받는 등가선량과 일정한 비율로 평가됨을 확인하였다.