• Journal of Trauma and Injury
• /
• v.27 no.3
• /
• pp.57-62
• /
• 2014

Purpose: A hamate body coronal fracture is well known as a very rare fracture in the carpal bones and is also hard to diagnose in initial stage due to the bone's architecture. We report our experience in treatment of such a fracture, and we present a review of the relevant literatures. Methods: Four patients who experienced hamate body coronal fractures from October 2006 to October 2013 were enrolled in this study. One patient also had an associated Capitate fracture, and two patients had associated dislocations of the $4^{th}$ metacarpal joint. We performed open reduction and mini-screw fixation on the four patients. In addition, a K-wire was fixed for the two patients with dislocations. Results: The average follow-up period was 24.5 months after surgery, and bone union was observed at the $8^{th}$ week after surgery. We confirmed that bone union had been completed for all the patients, and functional tests showed that joint motion was in the normal range without complications. Conclusion: When a patient has consistent pain on the ulnar side of the wrist, a hamate fracture should be suspected. Computer tomography is better than a simple X-ray scan for confirming the diagnosis of a hamate body coronal fracture. An open reduction and mini-screw fixation led to a good result.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.233-242
• /
• 2018

The purpose of this study is to evaluate the effect of resin cement color on the color of commercially available zirconia crown. The zirconia and resin cements used for the experiment were $NuSmile^{(R)}$ ZR Zirconia LT Shade (LT), $RelyX^{TM}$ U200 TR, A2, and A3O (TR, A2, A3O). The disks of zirconia and resin cements with diameters of 5 mm and thicknesses of 1 mm were prepared. Five disks were made for each specimen. The CIE $L^*a^*b^*$ values of zirconia, resin cements and the combinations thereof were measured on black and white backgrounds, respectively, using a spectrophotometer. The color effect of resin cement on the color of the zirconia crown was evaluated by calculating translucency parameter (TP), contrast ratio (CR), and color differences (${\Delta}E{^*}_{ab}$) based on the measured CIE $L^*a^*b^*$ values. The statistical significances were verified by one-way ANOVA and the Tukey-multiple comparisons tests. As a result, the TP and CR values were decreased (p<0.05) and increased, respectively, in the combination of zirconia and resin cement disks compared to zirconia disk per se. When using the black background, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of the zirconia and three resin cement disks were imperceptible level. The A3O showed the lowest ${\Delta}E{^*}_{ab}$ value among three resin cements. When using the white background, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and TR resin cement (LT/TR) disks showed acceptable level. However, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and A2 resin cement (LT/A2) disks showed unacceptable level. Meanwhile, the ${\Delta}E{^*}_{ab}$ values between zirconia and the combination of zirconia and A3O resin cement (LT/A3O) disks showed perceptible but acceptable level. Within the limits of this study, the colors of resin cements did not cause unacceptable color changes of zirconia except the combination of LT/A2 on the white background. The resin cement that gave the least color changes to zirconia was A3O. This means that the resin cement A3O is recommended to use for minimizing color changes when cementing commercially available zirconia crown to tooth.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.4
• /
• pp.235-243
• /
• 2012

This paper studies characteristics and causes of sound, and many others by distinguishing passivity and activity of the cases of a dog vocalizing human's words. As a result of the previous cases of vocalization of human's words, the dog was able to understand characteristics of a host's voice and imitate the sound using his own vocal organs. This is the case of passive vocalization accompanied by temporary voice imitation without a function of communication. On the contrary, as a consequence of the recently reported case in which a dog vocalizes such words as "Um-ma" and "Nu-na-ya," it shows the vocalization pattern clearly distinguished from the prior cases. The given dog repeatedly vocalizes pertaining words in an active manner according to circumstances and plays a role of fundamental communication and interaction with its host. The reason why the dog can vocalize the man's words actively is determined to be that the dog has a high level of intelligence and intimacy with its host, that people react actively to its pertaining pronunciation, and so forth. The following results can be used for the study that investigates animals' sound with vocalization possibility and language learning feasibility.

• Mycobiology
• /
• v.45 no.4
• /
• pp.255-262
• /
• 2017

A total of 121 species of lichens belonging to the genus Arthothelium have been described to date, most of which have been found in tropical regions. Here, we describe the discovery of a novel Arthothelium species for the first time in South Korea. Until now, Arthothelium ruanum was the only Arthothelium species reported in South Korea. Among the 113 specimens collected in this study, we identified A. ruanum and a putative new species, Arthothelium punctatum (J. S. Park & J.-S. Hur, sp. nov.). The diagnostic characters of A. punctatum are as follows: apothecia punctate, shortly elongate to branched, small, 0.1-0.2 mm wide, hypothecium hyaline to pale brown and obovate to broadly ellipsoid, muriform ascospores, $29.5-44.6{\times}12.2-18.2{\mu}m$. The new species was found in Mt. Seokbyeong at an altitude of 790 m on smooth bark. Upon phylogenic analysis, the putative new species, A. punctatum, was separated from other Arthothelium species although the specimens analyzed were clustered with Arthoniaceae in phylogenetic trees based on both the mitochondrial small subunit (mtSSU) sequence and combined mtSSU and nuclear ribosomal large subunit sequences. Our data clearly indicate that this species is a new species belonging to the family Arthoniaceae. To elucidate the taxonomic characteristics of the new species, we provide morphological descriptions and a distribution map.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1764-1773
• /
• 2018

A-PET is a quad-head PET scanner developed for use in small-animal imaging. The dimensions of its volumetric field of view (FOV) are $46.1{\times}46.1{\times}46.1mm^3$ and the gap between the detector modules has been minimized in order to provide a highly sensitive system. However, such a small FOV together with the quad-head geometry causes image quality degradation. The main factor related to image degradation for the quad-head PET is the mispositioning of events caused by the penetration effect in the detector. In this paper, we propose a precise method for modelling the system at the high spatial resolution of the A-PET using a LOR (line of response) based ML-EM (maximum likelihood expectation maximization) that allows for penetration effects. The proposed system model provides the detection probability of every possible ray-path via crystal sampling methods. For the ray-path sampling, the sub-LORs are defined by connecting the sampling points of the crystal pair. We incorporate the detection probability of each sub-LOR into the model by calculating the penetration effect. For comparison, we used a standard LOR-based model and a Monte Carlo-based modeling approach, and evaluated the reconstructed images using both the National Electrical Manufacturers Association NU 4-2008 standards and the Geant4 Application for Tomographic Emission simulation toolkit (GATE). An average full width at half maximum (FWHM) at different locations of 1.77 mm and 1.79 mm are obtained using the proposed system model and standard LOR system model, which does not include penetration effects, respectively. The standard deviation of the uniform region in the NEMA image quality phantom is 2.14% for the proposed method and 14.3% for the LOR system model, indicating that the proposed model out-performs the standard LOR-based model.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.20-25
• /
• 1992

To understand the fundamental features of reservoir environment and its future aspects, a simple predictive model for water quality was attempted with the aid of data easily obtained, Based on the data from 12 reservoirs in Korea, application of the simple predictive model was successfully made by means of statistical methods and simple physical submodels. Significant information on th effects of retention time on primary production in a reservoir, longitudinal change in water quality affected by certain non-dimensional parameters were also obtained. The chlorophyll-a concentration can be predicted by the equation as ; chlorophyll-a=($395{\time}limiting$ nutrient concentration) - 1.090.

• Journal of the Korean Society for information Management
• /
• v.5 no.1
• /
• pp.31-52
• /
• 1988

The information policy in Japan have bccir growing rapldlr 111 recent vttars. \'arioi~s level of govc~riimerital organrzatlons, ir~bt~tution arid agrircics have undt~rtak~~rr iriforrnatiori polrcy 111 order to i r l - crease information flow toward tlie society in Japan. At tlie same trme, computerized library systems also h a w uridergoirc rapid expansion. NACSIS(National Ceriter for- Science Informat~on System) wl~icl~ was cstablisl~ed bv Mirristr> of Etlr~c~arion, Sc~ence arid Culture haw witnessed dramatic adv;rnces i r i promoting for corrstructiori of database so as to provide their 11rf'3r.mat1orr nu nationwide scale. T l r i h articlr inrroduccs tlie actr\rtle> and ~mplcmeritat~o~~ of it format in^^ pol~cy wl~i(~li taktas a place hy goverrirnrlit of Japar~ aid arraly~c,.; thi~ ~ I . O I . P S I of deciiioii maltiiig iri polit~cal procedures. So far as b:ast-A\~ari riatioris art, ~ . n r i v t ~ r ~ ~ , e.;pc,ciall\. Kr,rc.an a~rd Japair !rave ,imilar cultural and liistorical backjir. ourii1, ard could t)t. tliif most a p p r o p r i a t ~ ~ caac stlldh for political ~nq~lerncritat~orr. Thus the topic of this artrclc will be useful to r t ~ a l l ~ t . Ore, trail ur~d c r r o r prorex, iri iiiior.matior~ pnlic\ulcorner.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.2
• /
• pp.180-188
• /
• 2018

Objective: The aim of this study was to investigate the effect of single nucleotide polymorphisms (SNPs) of the melanogenesis associated transcription factor (MITF) and dopachrome tautomerase (DCT) genes on plumage coloration in Asian native duck breeds. MITF encodes a protein for microphthalmia-associated transcription factor, which regulates the development and function of melanocytes for pigmentation of skin, hair, and eyes. Among the tyrosinase-related family genes, DCT is a pigment cell-specific gene that plays important roles in the melanin synthesis pathway and the expression of skin, feather, and retina color. Methods: Five Asian duck varieties (black Korean native, white Korean native, commercial Peking, Nageswari, and Bangladeshi Deshi white ducks) were investigated to examine the polymorphisms associated with plumage colors. Among previously identified SNPs, three synonymous SNPs and one indel of MITF and nine SNPs in exon regions of DCT were genotyped. The allele frequencies for SNPs of the black and white plumage color populations were estimated and Fisher's exact test was conducted to assess the association between the allele frequencies of these two populations. Results: Two synonymous SNPs (c.114T>G and c.147T>C) and a 14-bp indel (GCTGCAAAC AGATG) in intron 7 of MITF were significantly associated with the black- and white-colored breeds (p<0.001). One non-synonymous SNP [c.938A>G (p.His313Arg)] in DCT, was highly significantly associated (p<0.001) and a synonymous SNP (c.753A>G) was significantly associated (p<0.05) with black and white color plumage in the studied duck populations. Conclusion: The results of this study provide a basis for further investigations of the associations between polymorphisms and plumage color phenotypes in Asian duck breeds.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.226-233
• /
• 1999

An experimental study has been performed on natural convection heat transfer with a rapid crust formation in the molten metal pool of a low Prandtl number fluid. Two types of steady state tests, a low and high geometric aspect ratio cases in the molten metal pool, were performed. The crust thickness by solidification was measured 88 a function of boundary surface temperatures. The experimental results on the relationship between the Nusselt number and Rayleigh number In the molten metal pool with a crust formation were compared with existing correlations. The experimental study has shown that the bottom surface temperature of the molten metal layer, in all experiments. is the major influential parameter in the crust formation, duo to the natural convection flow. The Nusselt number of the case without a crust formation in the molten metal pool is greater than that of the case with the crust formation at the same Rayleigh number. The present experimental results on the relationship between the Nusselt number and Rayleigh number In the molten metal pool match well with Globe and Dropkin's correlation. From the experimental results, a now correlation between the Nusslet number and Rayleigh number in the molten metal pool with the crust formation was developed as $Nu=0.0923(Ra)^{0.302}$ ($2{\times}10^4< Ra<2{\times}10^7$).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.1
• /
• pp.11-23
• /
• 2010

A sacrificial member with aluminum foam of excellent energy absorption capacity was proposed for the protection of significant structures. Parametric studies of explicit finite element analyses were performed to investigate the pressure mitigation of close-range air-blasts. The scaled distance of the blast had a range of Z=0.48~0.95 and an empirical blast load function was utilized. The analytical parameters of the aluminum foam were density, thickness and the existence of a cover sheet. Analytical results showed that the transmitted pressure can be controlled to have a similar level of yield values of the foam by using a foam with low density and higher thickness. As the blast load increased, the sacrificial member needed to have higher density and thickness. A cover sheet of the foam clearly showed its effect on the wider distribution of blast pressure. It is necessary to determine the design parameters of sacrificial foams considering different energy dissipation capacities according to the scaled distance.