• 항공우주시스템공학회지
• /
• 제12권5호
• /
• pp.40-47
• /
• 2018

초음속 수축-확대 사각 노즐 내 강한 유동 박리를 동반한 초음속 유동에 적합한 난류 모델과 압축성 보정 모델을 평가하였다. 난류 모델로는 Yang과 Shih의 Low-Re $k-{\varepsilon}$ 모델, Menter의 $k-{\omega}$ SST모델, Wilcox의 $k-{\omega}$ 모델을 평가하였다. 압축성 효과를 보다 정확하게 예측하기 위하여 각각의 난류 모델에 Sarkar와 Wilcox의 압축성 보정 모델을 적용하였다. 각 난류 모델과 압축성 보정 모델의 결과는 실험 데이터와 비교하여 분석을 하였다. 난류 모델에 따라 충격파의 위치와 압력 회복률이 다르게 나타났으나 압축성 보정을 통해 더욱 개선된 결과를 얻었다.

• 한국전산유체공학회지
• /
• 제7권2호
• /
• pp.25-32
• /
• 2002

The velocity and temperature profiles in the cabin of the automobile affect greatly the comfortableness of passengers. In this paper, the three dimensional flow and temperature analysis in the cabin of real automobile have been peformed. The three dimensional Navier-Stokes equation solver was validated by comparing with the other numerical data of a 1/5 scale model. The temperature field of cavity was also analyzed for the validation of energy equation solver. After the code validation, the numerical analysis of real field of flow and temperature of an automobile was peformed and the present result provides the insight of flow and temperature field of the inside of cabin.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.69-73
• /
• 2003

The atmospheric pressure plasma is regarded as an effective method for surface treatments because it can reduce the period of process and doesn't need expensive vacuum apparatus. The performance of non-transferred plasma torches is significantly depended on jet flow characteristics out of the nozzle. In order to produce the high performance of a torch, the maximum discharge velocity near an annular gap in the torch should be maintained. Also, the compulsory swirl is being produced to gain the shape that can concentrate the plasma at the center of gas flow. In this work, the distribution of gas flow that goes out to atmosphere through a plenum chamber and nozzle is analyzed to evaluate the performance of atmospheric pressure plasma torch which can present the optimum design of the torch. Numerical analysis is carried out with various angles of an inlet flow velocity. Especially, three-dimensional model of the torch is investigated to estimate swirl effect. We also investigate the stabilization of plasma distribution. For analyzing the swirl in the plenum chamber and the flow distribution, FVM (finite volume method) and SIMPLE algorithm are used for solving the governing equations. The standard k-model is used for simulating the turbulence.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.847-852
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feed-water heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare wall thinning range according to change entrance nozzle diameter and position with reference numerical analysis model's wall thinning range, various numerical analysis models applied. In case of changing diameter, four different diameter is applied. And a side of nozzle position, two different position-vertical type and parallel type-is applied. And then this paper describes operation of numerical analysis which is composed similar condition with real feed water heater. In conclusion, this study shows effective design for shall wall thinning by changing nozzle diameter and position.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.678-681
• /
• 2010

본 연구에서는 비정상 노즐 구동 압력비 변화가 유동장의 천이형태 및 횡력 특성에 어떠한 영향을 미치는지 조사하기 위하여 수치해석적 연구를 수행하였다. 비정상, 축대칭, 압축성 N-S 방정식을 유한 체적법으로 이산화 하였으며, SST $k-{\omega}$ 난류모델을 적용하였다. 엔진 정지 및 시동과정을 모사하기 위하여, NPR은 2~10의 범위에서 계산 하였다. 본 연구의 결과로 박리 유동과 히스테리시스 현상은 구동 압력비에 크게 의존하며, 또한 압력비 변동 시간이 횡력 특성에 지대한 영향을 미칠 수 있음을 알았다.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.831-840
• /
• 1999

In this work, an aerothermodynamic calculation model for cooled axial flow turbine blades with trailing edge ejection is suggested and a mean line performance analysis of a turbine stage with nozzle cooling is carried out. A unique model regarding the interaction between coolant and main gas is proposed, while existing correlations are adopted to predict viscous loss and blade outflow angle. The interactions considered are the heat transfer from main gas to coolant and the temperature and pressure losses by the mixing of two streams due to the trailing edge coolant ejection. For a stator blade without ejection, trailing edge loss calculated by the trailing edge analysis is compared with that calculated by loss correlation. The effect of heat transfer effectiveness of coolant passage on the mixing loss is analyzed. For a model turbine stage with nozzle cooling, parametric analyses are carried out to investigate the effect of main design variables(coolant mass flow ratio, temperature and ejection area) on the stage performance.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.679-681
• /
• 2017

듀얼 벨 노즐에 확장-굴절 노즐 개념을 적용한 기초 전산수치해석 연구를 수행하였다. CEA 코드를 이용하여 노즐 내부 유동의 화학조성을 계산한 8 화학종 동결유동 해석을 진행하였고, 난류 모델은 $k-{\omega}$ SST 모델을 선정하였다. 듀얼 벨 노즐에 확장-굴절 노즐 개념을 적용함에 따라 변화된 천이고도 및 성능 계산을 수행하였다. 해석 결과 확장-굴절 노즐 개념을 적용함에 따라 과대팽창 조건이 형성되었고, 그에 따라 천이고도가 상승하였다.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4013-4026
• /
• 1996

A numerical simulation has been carried out for the jet impinging on a flat plate and a semi-circular concave surface. In this computation finite volume method was employed to solve the full Navier-Stokes equation based on a non-orthogonal coordinate with non staggered variable arrangement. The standard k-.epsilon. turbulent model and low Reynolds number k-.epsilon. model(Launder-Sharmar model) with Yap's correction were adapted. The accuracy of the numerical calculations were compared with various experimental data reported in the literature and showed good predictions of centerline velocity decay, wall pressure distribution and skin friction. For the jet impingement on a semi-circular concave surface, potential core length was calculated for two different nozzle(round edged nozzle and rectangular edged nozzle) to consider effects of the nozzle shape. The result showed that round edged nozzle had longer potential core length than rectangular edged nozzle for the same condition. Heat transfer rate along the concave surface with constant heat flux was calculated for various nozzle exit to surface distance(H/B) in the condition of same jet velocity. The maximum local Nusselt number at the stagnation point occurred at H/B = 8 where the centerline turbulent intensity had maximum value. The predicted Nusselt number showed good agreement with the experimental data at the stagnation point. However heat transfer predictions along the downstream were underestimated. This results suggest that the improved turbulence modeling is required.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.18-28
• /
• 2016

듀얼 벨 노즐을 평가하기 위한 기초연구로써 전산수치해석을 진행하였다. 추후 진행할 설계 변수 연구를 위해 듀얼 벨 노즐을 설계하고 입구 조건과 난류 모델, 최적 격자수를 선정하였다. 듀얼 벨 노즐은 KSLV-II 1단 노즐을 기반으로 설계하였다. 입구 조건은 설계 값과의 비교를 통해 비반응 8화학종의 동결유동 모델로 결정하였다. 난류 모델은 SST $k-{\omega}$ 모델이 가장 적합하였다. 격자 민감도 해석을 통해 약 15만개의 최적 격자수를 선정하였다. 본 연구에서 결정한 내용들을 바탕으로 향후 한국형발사체에 듀얼 벨 노즐을 적용한 해석을 진행하여 성능 이득을 연구하고자 한다.

• 한국연소학회지
• /
• 제15권2호
• /
• pp.12-18
• /
• 2010

A numerical analysis was performed to predict the thermo-fluid dynamic characteristics of hydrazine monopropellant reaction in the thruster combustor and nozzle. A 1-D porous model was introduced to simulate catalytic reaction by iridium in the combustor while 2-D axisymmetric analysis was applied to predict the nozzle flow. The chemical species and temperature variations were predicted by changing the injection pressure and mass flow rate and their results were validated by comparison with limited experimental data. The thrust variation with injection pressure could be estimated using the current 1-D combustor modeling.