• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.245-250
• /
• 2010

To support various bandwidth requirements for many kinds of devices such as PC, notebook, PDA, cellular phone, a transcoding proxy is usually necessary to provide not only adapting multimedia streams to the client by transcoding, but also caching them for later use. Due to huge size of streaming media, we proposed the 3 kinds of segmentation - PT-2, uniform, bitrate-based segmentation. And to reduce the CPU cost of transcoding video, we proposed the DQS service policy. In this paper, we simulate the combined our previous two researches that are bitrate-based segmentation and DQS(Degraded Quality Service) policy. Experimental results show that the combined policy outperforms companion schemes in terms of the byte-hit ratios and delay saving ratios.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.167-169
• /
• 2008

A 1.2KW Proton Exchange Membrane Fuel Cell(PEMFC) stack(Nexa Power Module) is installed to motor driven general scooter. The 24V, 650W BLDC motor is used for actuator and 2nd battery(24V, 4Ah) is used for stable starting of this motor. The operating information of Nexa Power Nodule is transmitted by RS-232 serial communication to notebook PC, and that data is analysed and displayed by the LabVIEW monitoring system.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.353-358
• /
• 2000

This paper presents the experimental investigation about miniature heat pipe for notebook PC. The focus of analysis is the operating temperature not to exceed $65^{\circ}C$ maximum allowable CPU surface temperature. Copper is used to heat pipe material and brass is wick material, and working fluid is selected to water. This cooling system is heat spreader method using a aluminum plate, since this method is most commonly used. According to the present study, heat for 3mm heat pipe, 8W, and for 4mm heat pipe, 10W, is found to power dissipation limit respectively, Soon after this investigation, sufficient long term life test should be followed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.214-219
• /
• 2003

Recently, the optical disk drive that is thin in thickness has been demanded by the popularization of notebook PC. The device that controls the thickness of a drive is the height of optical pickup. Therefore, researches about this are going on and an asymmetric actuator is the good choice fur this target. However, the actuator of this design has troubles that a subsidiary resonance is likely to be actuated by discord between the center of force and the mass of renter. In this paper, relation between the tracking coil and the subsidiary resonance is analyzed and dynamic characteristics of an actuator are improved by using experiments design and response surface method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.153-154
• /
• 2000

Large size poly-Si TFT-LCDs have been fabricated using p-channel thin film transistors for notebook PC application. We have designed and implemented the data sampling circuit and gate drivers that operate with low power consumption and high reliability. The gate driver has a redundant structure. We have realized the uniform and excellent display quality comparable to that of CMOS module. The reliability of panel is investigated and discussed by measuring the bias stability of transistors.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.93-99
• /
• 2002

The Cartesian loop chip which is one of key devices in narrow-band Walky-Talky transmitter using RZ-SSB modulation method was designed and implemented with 0.35 Um CMOS technology. The reduced size and low cost of transmitter were available by the use of direct-conversion and Cartesian loop chip, which improved the power efficiency and linearity of transmitting path. In addition, low power operation was possible through CMOS technology. The performance test results of transmitter showed -23 dBc improvement of IMD level and -30 dEc below suppression of SSB characteristic in the operation of Cartesian loop chip (closed-loop). At that time, the transmitting power was about 37 dBm (5 W). The main parameters to improve the transmitting characteristic and to compensate the distortion in feed back loop such as DC-offset, loop gain and phase value are interfaced with notebook PC to be controlled with S/W.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.391-392
• /
• 2007

In recent, portable information and communication terminals such as a notebook computer, an electronic pocketbook, a hand personal computer(PC) have been regards as the leading role in the coming next generation portable multimedia terminals which have hi-directional wireless data communication capability and can receive information and communication services such as electronic mail, database searching, and electronic shopping at anytime and anyplace. Therefore, in this paper, the circuit is simulated by 0.35um memory process used Current Limit for Boost DC-DC converter. Supply voltage $2.5V{\sim}3.3V$, output voltage 5V, Clock Frequency 1MHz, output current 200mA and line regulation decreased 12.46%.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.103-109
• /
• 2007

With the increase of track density, high rotational speed and the compatibility for various media in optical disk drives, the effective design to vibration reduction is very important for robust operation. Especially when a slim optical disk drive for a notebook PC is excited by a mass-unbalanced disk, internal vibration and its transmission to external case bring about severer problem than that of conventional one. In this paper a design process of a rubber mount in a slim optical disk drive for vibration reduction is presented. The characteristics of rubbery materials - hyper-elastic and visco-elastic - are measured with standard specimens. The static stiffness of a rubber mount was calculated by FEM and the dynamic stiffness is predicted with the static stiffness and the impedance test data of the standard specimen. The transmissibility tests are performed for the purpose of verification of the design process.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.464-466
• /
• 1993

In this paper, a peak detection algorithm having high reliability is proposed. The peak detection algorithm is implemented to a charger and power control system which is applicable to home appliances or notebook PC directly. The charger and power control system is controlled by a microprocessor, M50927 (Mitzubishi), to improve cost to performance ratio. The charger algorithm is designed to be operated under optimal charge node and various protections are added tn improve the reliability of the charger.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1637-1639
• /
• 2005

The measurement of magnetic field is performed about DC and AC magnetic field in test track of depot. The test point is cap, on the converter/inverter box, on the traction motor, on the APSE and on the line filter, the height of measurement is bottom and 50 cm height. In case of AC magnetic field, the selected specific frequency is measured on the converter/inverter box. The AC magnetic field is checked and analysis through RS-232C and notebook PC. The DC magnetic field is measured by using the Hall Probe, test result is saved and analysis by PXI system. On the line filter, the maximum value is 1.4 mT in case of DC magnetic field and 0.044 mT in case of AC magnetic field at 50 Hz.