• 제목/요약/키워드: Normal condition

검색결과 3,212건 처리시간 0.03초

습식연미 도정특성에 관한 연구 (Studies on wet polishing characteristic of rice)

  • 이병영;손종록;윤인화;김영배
    • Applied Biological Chemistry
    • /
    • 제35권6호
    • /
    • pp.475-478
    • /
    • 1992
  • 습식연미 도정조건 및 습식연미 도정쌀의 특성을 구명하기 위하여 일반도정시 강층 제거량별 및 가습량별로 습식연미 도정시험을 실시하였던 바 도정 적정 습식연미 도정조건은 일반도정으로 강층을 95% 제거한 후 5% 가습 연미하는 것이 가장 좋았다. 그리고 습식연미 도정쌀이 일반도정쌀 보다 현백률은 0.75% 낮았으며, 수분함량은 같았으나 백도는 3.5%나 높았고, 윤기가 매우 좋았다. 그리고 쌀을 수세하여 용출된 고형물 및 취반용액 중 용출고형물은 각각 0.30 및 2%, 정도 낮았다. 또한 습식연미 도정쌀의 저장성도 일반도정쌀 보다 좋았다.

  • PDF

국내 현장타설말뚝의 주면 접촉부에 대한 일정강성도 전단시험 (CNS Shear Tests for Granite-Concrete Interlace of drilled shaft)

  • 조천환;이명환;김성회;이혁진;유한규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.147-152
    • /
    • 2003
  • The purpose of this paper is to develope an understanding of fundamental mechanism of shear behaviour between granite and concrete interfaces. The interface of pile socketed in rock can be modeled in laboratory tests by resolving the axisymmetric pile situation into the two dimensional situation under CNS(constant normal stiffness) direct shear condition. In this paper, the granite core samples were used to simulate the interface condition of piles socketed In granite. The samples were prepared in the laboratory to simulate field condition, roughness(angle, height), stress boundary condition, and then tested by CNS direct shear tests. This paper gives some points about shearing behaviour of socket piles into domestic granite through the analysis of CNS tests results.

  • PDF

THE STRONG MORI PROPERTY IN RINGS WITH ZERO DIVISORS

  • ZHOU, DECHUAN;WANG, FANGGUI
    • 대한수학회보
    • /
    • 제52권4호
    • /
    • pp.1285-1295
    • /
    • 2015
  • An SM domain is an integral domain which satisfies the ascending chain condition on w-ideals. Then an SM domain also satisfies the descending chain condition on those chains of v-ideals whose intersection is not zero. In this paper, a study is begun to extend these properties to commutative rings with zero divisors. A $Q_0$-SM ring is defined to be a ring which satisfies the ascending chain condition on semiregular w-ideals and satisfies the descending chain condition on those chains of semiregular v-ideals whose intersection is semiregular. In this paper, some properties of $Q_0$-SM rings are discussed and examples are provided to show the difference between $Q_0$-SM rings and SM rings and the difference between $Q_0$-SM rings and $Q_0$-Mori rings.

EXCHANGE RINGS SATISFYING STABLE RANGE CONDITIONS

  • Chen, Huanyin;Chen, Miaosen
    • 대한수학회보
    • /
    • 제39권2호
    • /
    • pp.317-326
    • /
    • 2002
  • In this paper, we establish necessary and sufficient conditions for an exchange ring R to satisfy the n-stable range condition. It is shown that an exchange ring R satisfies the n-stable range condition if and only if for any regular a $\in$ R$^n$, there exists a unimodular u $\in$$^n$ R such that au $\in$ R is a group member, and if and only if whenever a$\simeq$$_n$b with a $\in$ R, b $\in$ M$_n$(R), there exist u $\in$ R$^n$, v $\in$$^n$ R such that a = ubv with uv = 1. As an application, we observe that exchange rings satisfying the n-stable range condition can be characterized by Drazin inverses. These also give nontrivial generalizations of [7, Theorem 10], [13, Theorem 10], [15, Theorem] and [16, Theorem. 2A].

신경회로망을 이용한 극저온 절삭특성의 예측 (The Prediction of the Cutting Characteristics in Cryogenic Cutting Using Neural Network)

  • 김칠수;오석영;오선세
    • 한국정밀공학회지
    • /
    • 제13권10호
    • /
    • pp.62-70
    • /
    • 1996
  • We experimented on cutting characteristics-cutting force, behavior of cutting temperature, surface roughness. chip thickness under low temperature, which generated by liquid nitrogen(77K). The work-pieces were freezed to-195 .deg. C and liquid nitrogen was also sprinkled on cutting area in order to decrease an experimental error of machining in low temperature. The workpiece was became to -195 .deg. C in5 minutes. In cooled condition surface roughness of workpiece was better than normal condition. In addition, we investigated the possibility that surface roughness of workpiece and cutting force can be predicted analyzing cutting conditions by the trained neural network.

  • PDF

입원노인과 일반노인의 삶의 질의 비교 (Comparison of the Quality of Life of the Elderly inpatient with that of the normal elderly people)

  • 민경진;김정자;차춘근
    • 보건교육건강증진학회지
    • /
    • 제17권2호
    • /
    • pp.183-205
    • /
    • 2000
  • This research was designed to compare the health condition and the quality of life of the elderly inpatients with those of the normal elderly people. The subjects of study were 482 elderly inpatients and 304 normal elderly people. The research was conducted in July and August using the instrument WHOQOL. The results of the research are as follows: For the level of health, it was recognized that male was healthier than female, having higher the education, living in the city rather than in the rural, keeping the normal life than being in the hospital. There were little difference in the past medical histories of the elderly inpatients and the normal elderly people. As to the diseases currently under the treatment, there were some difference between the elderly inpatients and the normal elderly people but the tendency was similar in the kinds and the frequencies. As to the recognition for the quality of life between the elderly inpatients and the normal elderly people based on the records reflected on each of the domains of WHOQOL, the normal elderly people more positively recognized in the overall quality of life and the following domains: physical, psychological, level of independence, and spirituality/religion/personal beliefs. The normal elderly people more positively recognized especially in the level of independence domain (mobility, activities of daily living, dependence on medication or treatments, working capacity). In the social relationships domain only the sexual activity was significant and the normal elderly people more positively recognized. The elderly inpatients showed the correlation of over 0.5 in the overall quality of life and the following domains: environment, social relationships, physical, psychological, level of independence. It was over 0.6 in the physical domain and the domains of psychological and level of independence. and the psychological domains of level of independence and social relationships. For the points of overall quality of life, it had no correlation with hospitalization but the health condition, residential district, occupation, and taste exerted a significant effect. As a result of separate analyses of the elderly inpatients and the normal elderly people, the health condition and the age only were the common variable which would exercise a significant effect. Besides, the primary factors which would exercise the quality of life were the occupation and taste for the elderly inpatients, and the residential district and source of income for the normal elderly people. In conclusion, it is first and foremost important to improve the standard of health for the overall quality of life for the elderly people, regardless of hospitalization. Therefore, a plan must be urgently drawn up for revitalization of the health promoting projects for the elderly people and the public health projects for the elderly people, and the investment must be increased for settlement of health problems of the elderly people.

  • PDF

Study on flow characteristics in LBE-cooled main coolant pump under positive rotating condition

  • Lu, Yonggang;Wang, Zhengwei;Zhu, Rongsheng;Wang, Xiuli;Long, Yun
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2720-2727
    • /
    • 2022
  • The Generation IV Lead-cooled fast reactor (LFR) take the liquid lead or lead-bismuth eutectic alloy (LBE) as the coolant of the primary cooling circuit. Combined with the natural characteristics of lead alloy and the design features of LFR, the system is the simplest and the number of equipment is the least, which reflects the inherent safety characteristics of LFR. The nuclear main coolant pump (MCP) is the only power component and the only rotating component in the primary circuit of the reactor, so the various operating characteristics of the MCP are directly related to the safety of the nuclear reactor. In this paper, various working conditions that may occur in the normal rotation (positive rotating) of the MCP and the corresponding internal flow characteristics are analyzed and studied, including the normal pump condition, the positive-flow braking condition and the negative-flow braking condition. Since the corrosiveness of LBE is proportional to the fluid velocity, the distribution of flow velocity in the pump channel will be the focus of this study. It is found that under the normal pump condition and positive-flow braking conditions, the high velocity region of the impeller domain appears at the inlet and outlet of the blade. At the same radius, the pressure surface is lower than the back surface, and with the increase of flow rate, the flow separation phenomenon is obvious, and the turbulent kinetic energy distribution in impeller and diffuser domain shows obvious near-wall property. Under the negative-flow braking condition, there is obvious flow separation in the impeller channel.

단자(Terminal) 압착 조건에 따른 파형의 고찰 및 분석 (A study and analysis of waveforms with press conditions of terminal)

  • 신영록;양윤석;김철한;사공건
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 영호남학술대회 논문집
    • /
    • pp.65-69
    • /
    • 2000
  • The crimping connection is a permanent connection that maintains mechanical and electrical property for a long time by crimping two conductors. In this paper, we have done a basic study to make a decision the normal or abnormal condition depending on crimping. By using PZT piezo-sensor, we have compared and analyzed crimping waveforms of abnormal conditions(core ommiting, cover biting) at the normal crimping height. And hence the normal or abnormal condition of crimping connections in real time could be determined by comparison of crimping waveforms in the cases of normal crimping, core omitting and cover biting.

  • PDF

A New Method for Coronal Force-Free Field Computation That Exactly Implements the Boundary Normal Current Density Condition

  • 이시백;전홍달;이중기;최광선
    • 천문학회보
    • /
    • 제44권2호
    • /
    • pp.71.3-71.3
    • /
    • 2019
  • Previously we developed a method of coronal force-free field construction using vector potentials. In this method, the boundary normal component of the vector potential should be adjusted at every iteration step to implement the boundary normal current density, which is provided by observations. The method was a variational method in the sense that the excessive kinetic energy is removed from the system at every iteration step. The boundary condition imposing the normal current density, however, is not compatible with the variational procedure seeking for the minimum energy state, which is employed by most force-free field solvers currently being used. To resolve this problem, we have developed a totally new method of force-free field construction. Our new method uses a unique magnetic field description using two scalar functions. Our procedure is non-variational and can impose the boundary normal current density exactly. We have tested the new force-free solver for standard Low & Lou fields and Titov-Demoulin flux ropes. Our code excels others in both examples, especially in Titov-Demoulin flux ropes, for which most codes available now yield poor results. Application to a real active region will also be presented.

  • PDF

화강암 절단면과 콘크리트 부착면에 대한 일정강성도 전단시험 (Shear Tests Under Constant Normal Stiffness for Granite-concrete Interface)

  • 조천환;이명환;유한규
    • 한국지반공학회논문집
    • /
    • 제20권1호
    • /
    • pp.5-12
    • /
    • 2004
  • 본 연구는 암반에 근입된 현장타설말뚝의 화강암과 콘크리트의 부착면에서의 전단거동을 이해하려는 데 있다. 암반에 근입된 현장타설말뚝의 전단거동을 실내에서 실험하기 위해서는 현장에서의 전단거동을 모델링 해야 한다. 따라서, 말뚝의 축방향 대칭성을 고려해 암반에 근입된 전단면을 2차원으로 모델링함으로써 일정수직강성도(conctant normal stiffness; CNS) 조건의 전단시험을 실시할 수 있다. 본 논문에서는 국내 화강암을 대상으로 거칠기, 암의 강도, 응력경계조건 등을 고려하여 암-콘크리트 접촉부에 대한 일정수직강성도 전단시험을 수행하였다. 실험결과 각 변수(요철부의 경사각 및 높이, 수직강성도)에 따른 전단특성(첨두전단강도, 전단응력, 수직응력)은 물론 팽창현상(dilation) 등을 관찰할 수 있었다. 시험결과에 따르면 첨두 전단강도는 요철부의 경사각이 증가할수록, 그리고 수직강성도가 증가할 수록 증가하는 것으로 나타났으며, 팽창량은 요철부의 각도가 클수록 수직강성도가 작을수록 크게 나타났다.