• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.8-15
• /
• 2012

A code developed using the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method is applied to simulate three-dimensional internal waves. The material interface is regarded as a moving contact discontinuity and is captured on the basis of mass conservation without any additional treatment across the interface. Inviscid fluxes are estimated using the flux-difference splitting scheme for incompressible fluids of different density. The hybrid Cartesian/immersed boundary method is used to enforce the boundary condition for a moving three-dimensional body. Immersed boundary nodes are identified within an instantaneous fluid domain on the basis of edges crossing a boundary. The dependent variables are reconstructed at the immersed boundary nodes along local normal lines to provide the boundary condition for a discretized flow problem. The internal waves are simulated, which are generated by an pitching ellipsoid near an material interface. The effects of density ratio and location of the ellipsoid on internal waves are compared.

• Toxicological Research
• /
• v.20 no.1
• /
• pp.49-53
• /
• 2004

The genetic basis of hypertension is complex, and has been considered to be associated with the dopamine D2 receptor gene (DD2R). Because association studies using the candidate gene approach may provide important clues regarding the pathogenesis of hypertension and establish basis for further study, we performed the association study on the relationship between genetic polymorphisms in the DD2R gene and hypertension in Koreans. Eighty nine patients with hypertension and 86 age-matched subjects with normal blood pressure were enrolled. Genomic DNA was extracted from peripheral blood leukocytes. PCR-RFLP analysis was performed to detect the three polymorphic Taq I sites in the DD2R gene. There were no significant differences in genotype, allele and haplotype distributions of any polymorphisms in the DD2R gene between two groups, respectively (P>0.05), although significant linkage disequilibriums among these polymorphic sites were detected by pair-wise analysis (P<0.05). Therefore, our negative result suggest that the three Taq I RFLPs in the DD2R gene were not significantly associated with hypertension in Koreans.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1699-1706
• /
• 2002

In this paper, the investigation about the elevation control and the formation of the free surface of magnetic fluids is carried out theoretically and experimentally on the basis of magnetic fluids is carried out theoretically and experimentally on the basis of Rosensweig' Ferrohydrodynamic Bernoulli Equation. Governing equations of magnetic fields are solved using the concept of vector potential. While applied magnetic fields are induced by 4$\times$4 electromagnet located under the magnetic fluid, the fee surface of the magnetic fluid is formed the balance of surface force, gravity, pressure difference, magnetic normal pressure and magnetic body force. The results of numerical simulation and experiment show the formation of the free surface of the magnetic fluid. Using PID control, an experiment for the elevation control of the free surface of magnetic fluids is performed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.35-42
• /
• 2008

This study describes the tensile test results of AISI type 304 under room and elevated temperatures. The tensile tests for AISI type 304, which is widely used for airframe structural applications, are performed according to ASTM standard. Normal probability plot was used to evaluate A and B Basis value for tensile strengths. Ramberg-Osgood parameter assuming an exponential relationship between stress and small plastic strain was obtained by least square estimate for test data. After room and elevated temperature tensile tests the surface of fractured specimens was observed by SEM images and EDX.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1280-1290
• /
• 2016

This paper presents an advanced estimation method for obtaining the probability density functions of a damage parameter for valve leakage detection in a reciprocating pump. The estimation method is based on a comparison of model data which are simulated by using a mathematical model, and experimental data which are measured on the inside and outside of the reciprocating pump in operation. The mathematical model, which is simplified and extended on the basis of previous models, describes not only the normal state of the pump, but also its abnormal state caused by valve leakage. The pressure in the cylinder is expressed as a function of the crankshaft angle, and an additional volume flow rate due to the valve leakage is quantified by a damage parameter in the mathematical model. The change in the cylinder pressure profiles due to the suction valve leakage is noticeable in the compression and expansion modes of the pump. The damage parameter value over 300 cycles is calculated in two ways, considering advance or delay in the opening and closing angles of the discharge valves. The probability density functions of the damage parameter are compared for diagnosis and prognosis on the basis of the probabilistic features of valve leakage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1155-1159
• /
• 2006

In this paper, we have proposed a privacy protection RFID system using random number based ID allocation. Currently, there are rising issues about privacy violation in RFID system. This issues caused by tracking the ID of tag which present unique identity of tag. The proposed system dynamically allocates random basis ID to tag, then the tag can not be traced. The random ID allocation procedures of this system can be operate in cryptographic mode or normal(non-cryptographic) mode. This system can be applied to privacy protected customer tracking RFID system in mesa-outlet stores which tracing customer's moving path.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.359-374
• /
• 2024

A high-fidelity numerical analysis methodology was proposed for evaluating the fuel rod cladding integrity of a Prototype Gen IV Sodium Fast Reactor (PGSFR) during normal operation and Design basis events (DBEs). The MARS-LMR code, system transient safety analysis code, was applied to analyze the DBEs. The results of the MARS-LMR code were used as boundary condition for a 3D computational fluid dynamics (CFD) analysis. The peak temperatures considering HCFs satisfied the cladding temperature limit. The temperature and pressure distributions were calculated by ANSYS CFX code, and applied to structural analysis. Structural analysis was performed using ANSYS Mechanical code. The seismic reactivity insertion SSE accident among DBEs had the highest peak cladding temperature and the maximum stress, as the value of 87 MPa. The fuel cladding had over 40 % safety margin, and the strain was below the strain limit. Deformation behavior was elucidated for providing relative coordinate data on each active fuel rod center. Bending deformation resulted in a flower shape, and bowing bundle did not interact with the duct of fuel assemblies. Fuel rod maximum expansion was generated with highest stress. Therefore, it was concluded that the fuel rod cladding of the PGSFR has sufficient structural safety margin during DBEs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1616-1624
• /
• 2016

The aim of present experiment was to investigate the effect of protein reduction in commercial broiler chicken rations with incorporation of de-oiled rice bran (DORB) and supplementation of limiting amino acids (valine, isoleucine, and/or tryptophan) with ration formulation either on total amino acid (TAA) or standardized ileal digestible amino acids (SIDAA). The experimental design consisted of $T_1$, TAA control; $T_2$ and $T_3$, 0.75% and 1.5% protein reduction by 3% and 6% DORB incorporation, respectively by replacing soybean meal with supplemental limiting amino acids to meet TAA requirement; $T_4$, SIDAA control, $T_5$ and $T_6$, 0.75% and 1.5% protein reduction by DORB incorporation (3% and 6%) with supplemental limiting amino acids on SIDAA basis. A total of 360 dold fast growing broiler chicks (Vencobb-400) were divided into 36 homogenous groups of ten chicks each, and six dietary treatments described were allocated randomly with six replications. During 42 days trial, the feed intake was significantly (p<0.05) reduced by TAA factor compared to SIDAA factor and protein factor significantly (p<0.05) reduced the feed intake at 1.5% reduction compared to normal protein group. This was observed only during pre-starter phase but not thereafter. The cumulative body weight gain (BWG) was significantly (p<0.05) reduced in TAA formulations with protein step-down of 1.5% ($T_3$, 1,993 g) compared to control ($T_1$, 2,067 g), while under SIDAA formulations, BWG was not affected with protein reduction of 1.5% ($T_6$, 2,076 g) compared to $T_4$ (2,129 g). The feed conversion ratio (FCR) was significantly (p<0.05) reduced in both TAA and SIDAA formulations with 1.5% protein step-down ($T_3$, 1.741; $T_6$, 1.704) compared to respective controls ($T_1$, 1.696; $T_4$, 1.663). The SIDAA formulation revealed significantly (p<0.05) higher BWG (2,095 g) and better FCR (1.684) compared to TAA formulation (2,028 g; 1.721). Intake of crude protein and all limiting amino acids (SID basis) was higher in SIDAA group than TAA group with resultant higher nitrogen retention (4.438 vs 4.027 g/bird/d). The nitrogen excretion was minimized with 1.5% protein reduction (1.608 g/bird) compared to normal protein group (1.794 g/bird). The serum uric acid concentration was significantly reduced in $T_3$ (9.45 mg/dL) as compared to $T_4$ (10.75 mg/dL). All carcass parameters were significantly (p<0.05) higher in SIDAA formulation over TAA formulation and 1.5% protein reduction significantly reduced carcass, breast and thigh yields. In conclusion, the dietary protein can be reduced by 0.75% with TAA formulation and 1.5% with SIDAA formulation through DORB incorporation and supplementation of limiting amino acids and among formulations, SIDAA formulation was better than TAA formulation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2008

The concept of growing degree-days (GDD) is widely accepted as a tool to relate plant growth, development, and maturity to temperature. Information on GDD can be used to predict the yield and quality of several crops, flowering date of fruit trees, and insect activity related to agriculture and forestry. When GDD is expressed on a spatial basis, it helps identify the limits of geographical areas suitable for production of various crops and to evaluate areas agriculturally suitable for new or nonnative plants. The national digital climate maps (NDCM, the fine resolution, gridded climate data for climatological normal years) are not provided on a daily basis but on a monthly basis, prohibiting GDD calculation. We applied a widely used GDD estimation method based on monthly data to a part of the NDCM (for Hapcheon County) to produce the spatial GDD data for each month with three different base temperatures (0, 5, and $10^{\circ}C$). Synthetically generated daily temperatures from the NCDM were used to calculate GDD over the same area and the deviations were calculated for each month. The monthly-data based GDD was close to the reference GDD using daily data only for the case of base temperature $0^{\circ}C$. There was a consistent overestimation in GDD with other base temperatures. Hence, we estimated spatial GDD with base temperature $0^{\circ}C$ over the entire nation for the current (1971-2000, observed) and three future (2011-2040, 2041-2070, and 2071-2100, predicted) climatological normal years. Our estimation indicates that the annual GDD in Korea may increase by 38% in 2071-2100 compared with that in 1971-2000.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.547-556
• /
• 2014

Korea expects a shortage in storage capacity for spent fuels at reactor sites. Therefore, a need for more metal and/or concrete casks for storage systems is anticipated for either the reactor site or away from the reactor for interim storage. For the purpose of interim storage and transportation, a dual purpose metal cask that can load 21 spent fuel assemblies is being developed by Korea Radioactive Waste Management Corporation (KRMC) in Korea. At first the gamma and neutron flux for the design basis fuel were determined assuming in-core environment (the temperature, pressure, etc. of the moderator, boron, cladding, $UO_2$ pellets) in which the design basis fuel is loaded, as input data. The evaluation simulated burnup up to 45,000 MWD/MTU and decay during ten years of cooling using the SAS2H/OGIGEN-S module of the SCALE5.1 system. The results from the source term evaluation were used as input data for the final shielding evaluation utilizing the MCNP Code, which yielded the effective dose rate. The design of the cask is based on the safety requirements for normal storage conditions under 10 CFR Part 72. A radiation shielding analysis of the metal storage cask optimized for loading 21 design basis fuels was performed for two cases; one for a single cask and the other for a $2{\times}10$ cask array. For the single cask, dose rates at the external surface of the metal cask, 1m and 2m away from the cask surface, were evaluated. For the $2{\times}10$ cask array, dose rates at the center point of the array and at the center of the casks' height were evaluated. The results of the shielding analysis for the single cask show that dose rates were considerably higher at the lower side (from the bottom of the cask to the bottom of the neutron shielding) of the cask, at over 2mSv/hr at the external surface of the cask. However, this is not considered to be a significant issue since additional shielding will be installed at the storage facility. The shielding analysis results for the $2{\times}10$ cask array showed exponential decrease with distance off the sources. The controlled area boundary was calculated to be approximately 280m from the array, with a dose rate of 25mrem/yr. Actual dose rates within the controlled area boundary will be lower than 25mrem/yr, due to the decay of radioactivity of spent fuel in storage.