• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.253-257
• /
• 2002

A new photoalignment material PNC, pole norbornene-2,3-dicarboxyolyl cholesterol, was synthesized and the electro-optical (EO) characteristics of the vortical-alignment (VA) liquid crystal display (LCD) photoaligned with UV exposure on the PNC surface were studied. EO characteristics of the photoaligned VA-LCD using a UV filter-less method was better than that of the UV filter method on the PNC surface for short UV exposure time. The response time of the photoaligned VA-LCD on the PNC surface without UV filter on the PNC surface is almost the same compared with the rubbing aligned VA-LCD.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.995-1002
• /
• 2009

Luminescent polynorbornene (PNB)/quantum dot (CdSe@ZnS; QD) composite nanorods and nanotubes were successfully prepared using anodic aluminum oxide (AAO) membranes of various pore sizes as templates. To protect QDs with high quantum yield from quenching during the phosphoric acid treatment used to remove the AAO templates, chemically stable and optically clear norbornene-maleic anhydride copolymers (P(NB-r-MA)) were employed as a capping agent for QDs. The amine-terminated QDs reacted with maleic anhydride moieties in P(NB-r-MA) to form PNB-grafted QDs. The chemical- and photo-stability of QDs encapsulated with PNB copolymers were investigated by photoluminescence (PL) spectroscopy. By varying the pore size of the AAO templates from 40 to 380 urn, PNB/QD composite nanorods or nanotubes were obtained with a good dispersion of QDs in the PNB matrix.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.424-429
• /
• 2006

The synthesis of a series of poly(POSS-NBE-b-MTD) copolymers was successfully accomplished, taking advantage of sequential, ring-opening, metathesis block copolymerization using $RuCl_2(=CHPh)(PCy_3)_2$ catalyst. By using cyclopentyl-POSS-norbornene (POSS-NBE) monomer as the first block in the block copolymer, living poly(POSS-NBE) with controlled molecular weight and narrow molecular weight distribution was produced. Then, poly(POSS-NBE-b-MTD) copolymers were successfully prepared, in which sequential monomer addition of methyltetracyclododecene (MTD) to the living poly(POSS-NBE) chain ends was utilized to achieve quantitative crossover efficiency. Characterization by $^1H$ NMR spectroscopy and GPC confirmed the high definition and structural integrity of the poly(PO$S-NBE-b-MTD) copolymers. Thermal properties-and morphologies of the POSS-containing block copolymer nanocomposites were also investigated by using thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and wide-angle X-ray scattering (WAXS).

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.333-333
• /
• 2006

We synthesized two novel polynorbornene derivatives, chiral poly(norbornene acid methyl ester) (C-PNME) and racemic poly(norbornene acid n-butyl ester) (R-PNME), which are potential low dielectric constant materials for applications in advanced microelectronic and display devices. Thin films of these polymers deposited on substrates were investigated by structural analyses using synchrotron grazing incidence X-ray scattering, specular reflectivity and ellipsometry. These analyses provided important information on the structure, electron density gradient across film thickness, chain orientation, refractive index and thermal expansion of the polymers in substrate-supported thin films. The structural characteristics and properties of the thin films were first dependent on the polymer chain' tacticity and further influenced by film thickness and thermal annealing.

• 폴리머
• /
• 제24권6호
• /
• pp.751-756
• /
• 2000

rac-Et(Ind)$_2$ZrC1$_2$/MMAO계를 사용한 에틸렌(E)과 시클로올레핀 (CO)의 공중합에서 CO의 구조가 촉매 활성 및 공중합체 (COC)의 구조와 성질 등에 미치는 영향을 조사하였다. 즉, 노르보르넨 (N), 페닐기 또는 비닐기가 치환된 형태인 5-페닐-2-노르보르넨 (PN) 및 5-비닐-2-노르보르넨 (VN)을 사용하여 [CO]/[E] 농도비에 따른 촉매 활성 및 공중합체의 성질을 조사하였다. [CO]/[E] 공급비가 증가함에 따라 COC에 대한 촉매 활성은 감소하였고, $T_{g}$ 는 증가하는 일반적인 경향을 보였으나, 그 변화 정도는 CO의 종류에 따라 달랐다. E와 VN의 공중합체 구조를 FT-IR과 $^{13}$C-NMR로 조사한 결과, VN에 존재하는 고리내의 C=C 이중결합이 중합에 관여하고 비닐기의 C=C 이중결합은 그대로 남아있는 것을 확인하였다. 그리고 공중합체 내에 존재하는 비닐기의 C=C 이중결합에 글리시딜메타크릴레이트를 graft하여 공중합체를 기능화하였다.

• 폴리머
• /
• 제37권3호
• /
• pp.356-361
• /
• 2013

본 연구에서는 5-ethylidene-2-norbornene(ENB)과 가교제가 혼합된 ENB 자가치료제에 melamine-urea-formaldehyde로 둘러싸인 마이크로캡슐을 제조하였다. 이때 자가치료제에는 빨간 색소를 첨가하여 관찰이 용이하도록 하였다. 마이크로캡슐의 열적 저항성과 캡슐의 크기 및 분포 그리고 형상을 관찰한 결과 우수한 캡슐이 제조된 것을 확인하였으며, 자가치료제에 빨간 색소의 첨가가 캡슐의 형성에 영향을 주지 않았다. 또한 마이크로캡슐과 Grubbs 촉매를 에폭시 코팅 층에 분산시킨 다음 이에 손상을 가하여 크랙을 유발하고 그것을 광학현미경으로 관찰한 결과, 크랙에 의해 캡슐이 파손되어 자가치료제가 흘러나와 크랙 면을 채우고 촉매와 반응하는 것을 알 수 있었다.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.478-483
• /
• 2004

Two different diene monomers [dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB)] as self-healing agents for polymeric composites were microencapsuled by in situ polymerization of urea and formaldehyde. We obtained plots of the storage modulus (G') and tan $\delta$ as a function of cure time by using dynamic mechanical analysis to investigate the cure behavior of the unreacted self-healing agent mixture in the presence of a catalyst. Glass transition temperatures (T$\_$g/) and exothermic reactions of samples cured for 5 and 120 min in the presence of different amounts of the catalyst were analyzed by differential scanning calorimetry. Of the two dienes, ENB may have advantages as a self-healing agent because, when cured under same conditions as DCPD, it reacts much faster in the presence of a much lower amount of catalyst, has no melting point, and produces a resin that has a higher value of T$\_$g/. Microcapsules containing the healing agent were successfully formed from both of the diene monomers and were characterized by thermogravimetric analysis. Optical microscopy and a particle size analyzer were employed to observe the morphology and size distribution, respectively, of the microcapsules. The microcapsules exhibited similar thermal properties as well as particle shapes and sizes.

• 폴리머
• /
• 제24권4호
• /
• pp.445-452
• /
• 2000

다양한 종류의 메탈로센 촉매와 공촉매인 개질-MAO (MMAO)을 이용한 에틸렌 (E)과 노르보르넨 (N)의 공중합에서 중합조건이 촉매 활성 및 공중합체의 구조와 성질 등에 미치는 영향을 조사하였다. 즉 $C_2$-대칭구조를 가지는 rac-Et(Ind)$_2$ZrC $l_2$, $M_2$Si(Ind)$_2$ZrC $l_2$, M $e_2$Si-(Cp)$_2$ZrC $l_2$ 및 $C_{s}$-대칭구조를 가지는 iPr(FluCp)ZrC $l_2$, 그리고 constrained geometry catalyst (CGC)와 이중다리 (di-bridged) 지르코노센 둥의 다양한 메탈로센 촉매를 사용하여 [N]/[E] 공급비에 따른 촉매 활성, 공중합체 (COC)의 열적 성질 및 N 함량을 조사하였다. rac-Et(Ind)$_2$ZrC $l_2$를 촉매로 사용한 경우에 공촉매의 몰비, 중합 온도 및 공촉매 종류 등의 중합조건을 조사한 결과 [Al]/[Zr]=3000, 4$0^{\circ}C$, MMAO 공촉매 등이 적합하였다. [N]/[E] 공급비가 증가됨에 따라 COC내의 N 함량이 증가하는 일반적인 경향을 보였으나, 촉매 활성은 사용된 메탈로센 촉매의 구조에 따라 달랐다. 즉 [N]/[E]가 증가할수록 $C_2$-대칭구조의 촉매 활성은 감소하였으나 $C_{s}$-대칭구조의 경우에는 증가하였다. 촉매활성과 N함량 등을 고려해 보면 rac-Et(Ind)$_2$ZrC $l_2$/MMAO계에서 비교적 높은 촉매 활성과 COC의 $T_{g}$제어가 용이한 결과를 얻을 수 있었다. 촉매종류에 따른 단량체의 반응성비를 Helen-Tudos 방법으로 구하였다.하였다.

• Macromolecular Research
• /
• 제15권5호
• /
• pp.430-436
• /
• 2007

The dinuclear half-sandwich CGCs (constrained geometry catalyst) with a polymethylene bridge, $[Ti({\eta}^5 : {\eta}^1-indenyl)SiMe_2NCMe_3]_2(CH_2)_n]$[n = 6 (1) and 12 (2)], have been employed in the copolymerization of ethylene and norbornene (NBE). To compare the mononuclear metallocene catalysts; $Ti({\eta}^5 : {\eta}^1-2-hexylindenyl)SiMe_2NCMe_3$ (3), $(Cp^* SiMe_2NCMe_3)$Ti (Dow CGC) (4) and ansa-$Et(Ind)_2ZrCI_2$ (5), were also studied for the copolymerization of ethylene and NBE. It was found that the activity increased in the order: 1 < 2 < 3 < 5 < 4, indicating that the presence of the bridge between two the CGC units contributed to depressing the polymerization activity of the CGCs. This result strongly suggests that the implication of steric disturbance due to the presence of the bridge may playa significant role in slowing the activity. Dinuclear CGCs have been found to be very efficient for the incorporation of NBE onto the polyethylene backbone. The NBE contents in the copolymers formed ranged from 10 to 42%, depending on the polymerization conditions. Strong chemical shifts were observed at ${\delta}$42.0 and 47.8 of the isotactic alternating NBE sequences, NENEN, in the copolymers with high NBE contents. In addition, a resonance at 47.1 ppm for the sequences of the isolated NBE, EENEE, was observed in the $^{13}C-NMR$ spectra of the copolymers with low NBE contents. The absence of signals for isotactic dyad at 48.1 and 49.1 ppm illustrated there were no isotactic or microblock (NBE-NBE) sequences in the copolymers. This result indicated that the dinuclear CGCs were effective for making randomly distributed ethylene-NBE copolymers.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.200-200
• /
• 2006

Several polynorbornene or poly(norbornene-7-oxide) based functional block copolymers were synthesized by ring opening metathesis polymerization (ROMP) with good molecular weight and polydispersity control. Some representative functional groups in these polymers are a nitrobenzoyl group or ferrocene. These polymers were subjected to various chemical modification reactions to give other block copolymers that contain novel functionality such as amine, diazonium salt, and diazo groups. The resulting polymers were characterized by various techniques such as GPC, NMR, UV-VIS, AFM, and cyclovotammography (CV).