• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.47-52
• /
• 1998

The nonuniformity of energy absorption capability of ZnO varistor is systematically discussed in this paper. The nonuniformity of electrical characteristics and microstructure leads to decrease the energy absorption capability of ZnO varistor. The energy absorption capabilities were measured under different current waves, the experimental results stated that they have highly scattered phenomena. The influences of varistor surface area and nonuniformity of electrical characteristics to the energy absorption capability and the nonuniformity of commercial ZnO varistors were analyzed. There is a high nonuniformity existing in the energy absorption capability of commercial ZnO varistors.

• Journal of the Optical Society of Korea
• /
• 제17권3호
• /
• pp.255-261
• /
• 2013

Scene-based nonuniformity correction techniques for infrared focal-plane arrays have been widely considered as a key technology, and various algorithms have been proposed to compensate for fixed-pattern noise. However, the existed algorithms' capability is always restricted by the problems of convergence speed and ghosting artifacts. In this paper, an effective scene-based nonuniformity correction method is proposed to solve these problems. The algorithm is an improvement over the constant statistics method and a temporal median is utilized with the Gaussian kernel to estimate the nonuniformity parameters. Also theoretical analysis is conducted to demonstrate that effective ghosting artifacts elimination and superior convergence speed can be obtained with the proposed method. Finally, the performance of the proposed technique is tested with infrared image sequences with simulated nonuniformity and with infrared imagery with real nonuniformity. The results show the proposed method is able to estimate each detector's gain and to offset reliably and that it performs better in increasing convergence speed and reducing ghosting artifacts compared with the conventional techniques.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.261-264
• /
• 1999

This paper presents a circuit-level method to deal with transistor nonuniformity In this method, which is called transistor slicing, a transistor is implemented as a parallel connection of multiple smaller transistors. The paper analyzes the method and demonstrates that transistor slicing can effectively reduce the nonuniformity in TFT mobility and threshold voltage. The method is particularly useful in Implementing analog functions using poly-silicon TFTs which show a significant level of nonuniformity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.837-841
• /
• 2001

Almost all power plant boiler has temperature distribution nonuniformity problem in heat transfer tube flow path. It can cause hot spot damage of superheated or reheated heat transfer section and reduce maintenance schedule when nonuniformity is severe. There are two solutions for improvement temperature nonuniformity. one is change of gas flow distribution of gas path and the other is contorl steam flow in tube bank. Of course, first method is very difficulty to apply but second method is'nt. In this paper, control steam flow is used to solve temperature nonuniformity of power plant boiler.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.73-76
• /
• 2000

A Scene Based Technique(SBT) that corrects linear array infrared detector's nonuniformity is proposed. Basically, this technique dispenses with using temperature references on a linear array infrared detector. To correct the nonuniformity of infrared images, we use three methods. Firstly, we detect bad channels by using the information which is cumulated all the same line pixels. Secondly, a variable window method is applied to compensate more accurately. Thirdly, an adaptive method which updates gain and offset coefficient is used only on a stationary region. These results are demonstrated on a computer simulation with various images. As a result, the nonuniformity is corrected completely, so that images are enhanced and PSNR(peak signal to noise ratio) is improved much.

• 한국컴퓨터정보학회논문지
• /
• 제22권8호
• /
• pp.15-23
• /
• 2017

In this paper, the block reweighting and global offset initialization methods are proposed to complement the improved IRLMS algorithm which is the effective algorithm in registration based SBNUC algorithm. Proposed block weighting method reweights the error map whose abnormal data are excluded. The global offset initialization method compensates the global nonuniformity initially. The ordinary registration based SBNUC algorithm is hard to compensate global nonuniformity because of low scene motion. We employ the proposed methods to improved IRLMS algorithm, and apply it to real-world infrared raw image stream. The result shows that new implementation provides 3.5~4.0dB higher PSNR and convergence speed 1.5 faster then the improved IRLMS algorithm.

• 대한기계학회논문집B
• /
• 제22권2호
• /
• pp.229-239
• /
• 1998

The present paper examines the thermal and flow characteristics of a parallel flow heat exchanger and investigates the effects of the parameters on thermal performance by defining the flow nonuniformity. Thermal performance of a parallel flow heat exchanger is maximized by the optimization using Newton's searching method. The flow nonuniformity is chosen as an object function. The parameters such as the locations of separator, inlet, and outlet are expected to have a large influence on thermal performance of a parallel flow heat exchanger. The effect of these parameters are quantified by flow nonuniformity. The results show that the optimal locations of inlet and outlet are 19.73 mm and 10.9 mm, respectively. It is also shown that the heat transfer increases by 7.6% and the pressure drop decreases by 4.7%, compared to the reference model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.75-78
• /
• 2000

This paper is estimated to enhance yield improvement and device reliability using PDM(plasma damage monitoring) system capable of in-suit detection about plasma nonuniformity. PDM Tool is the non-contact method of wafer and surface potential electrode(kelvin probe). Its tool measures Vox(oxide barrier) with charge created by plasma. It's possible to inspect the wafer damage generated by plasma charge and analysis of in-situ monitoring data. we obtained the good data which is continuously prevented from plasma damage using its tool for 10weeks. This tool is contributed to preventive steps contemporaneously inspecting the difference of inter-chamber.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.299-303
• /
• 1991

A lamp heated LPCVD equipment has been made. Wafer is heated by an array of fifteen tungsten halogen lamps above the front side of a wafer and pyrometer views the back side of the wafer through $CaF_2$ window. Reactor which consisits of a quartz window and a water cooled-stainless steel plate can be evacuated to $5{\times}10^{-3}$ torr with a rotary vane pump. By pyrolysis of $SiH_4$ at about $600^{\circ}C$, polysilicon has been formed on the silicon dioxide film. The measured results show that thickness nonuniformity is 15% and temperature nonuniformity is 1.1%. Because activation energy of pyrolysis of $SiH_4$ is very high, about 1.8eV, small temperature variation will induce large thickness nonuniformity. The main cause of temperature nonuniformity is unsymmetry of lamp power and an unbalanced cooling structure. Charls & Evans' SIMS result shows that the oxygen content in the deposited polysilicon is comparable to that of silicon substrate but carbon content is ten times higher.

• 한국정보통신학회논문지
• /
• 제14권4호
• /
• pp.948-958
• /
• 2010

MRI 시스템이 수집하는 인체신호는 매우 미약하기 때문에 영상화 과정을 거치면서 외부 잡음이나 시스템 불안정성에 의한 영향을 쉽게 받을 수 있다. 따라서 본 논문에서는 저 자장 MRI시스템에서 RF 수신코일의 디자인적 요소에 의해 발생되는 불균일성을 분석하여 영상의 균일도 향상 기법을 제안한다. 본 논문에서는 MRI영상의 신호강도 불균일성을 보정하기 위한 방법 중에서 팬텀 데이터를 이용하여 확장된 크기를 갖는 3차원 bias 볼륨 데이터를 획득하기 위한 방법을 제안함으로써 다양한 크기를 갖는 영상의 보정이 가능하도록 하였다. 제안된 bias 데이터의 최적화 기법을 적용하여 실험을 수행한 결과 단일 bias 데이터의 사용으로 다양한 영상법에 의한 영상을 효과적으로 보정할 수 있음을 확인 하였다.