• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.72-77
• /
• 2014

3.2YSZ melted by the 'skull melting' method has good physical properties and does not undergo low-temperature degradation. Due to its excellent physical and mechanical properties, skull-melted 3.2YSZ has been developed as a dental implant material. In this study, a porous, resin-bonded diamond wheel was created and its grinding characteristics were compared with those of traditional nonporous wheels using skull-melted 3.2YSZ. The experimental results indicate that the porous, resin-bonded diamond wheel requires less grinding force and power. In addition, the porous, resin-bonded diamond wheel requires a greater degree of roughness.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1707-1709
• /
• 1996

For the improvement of the performance and life time of phosphoric acid fuel cell, the management of electrolyte in the electrocatalyst layer and electrolyte matrix in the cell structure is very important. Porous bipolar pinto structure, that is known as an advanced type, is generally used for the storage of electrolyte in the cell. In this paper, the single cell was made of the electrode by coating directly electrocatalyst layer on porous bipolar plate. The single cell showed $186\;mA/cm^2$ at 0.6V. This performance is similar to the performance of the conventional nonporous plate single cell. The technology of porous plate single cell could be directly used to the fabrication of stack in order to improve the performance and life time of phosphoric acid fuel cell.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.766-772
• /
• 2002

The plasmid, pJHKJ4, containing the endoxylanase gene, was introduced into Bacillus subtilis DB 104. The recombinant cells produced 587 unit/ml of endoxylanase at 33 h. The endoxylanase was immobilized covalently on the surface of silica fur effective xylan hydrolysis. The activities of the immobilized and free endoxylanases were optimal at pH 6.5 and 10 mM $MnSO_4$. The optimal temperature of the immobilized endoxylanase was $60^{\circ}C$, whereas that of the free endoxylanase was $65^{\circ}C$. Under these optimal conditions, the activity of the immobilized endoxylanase was 1.7 times higher than that of the fee endoxylanase. From microscope photographs, the immobilized endoxylanase was found to be bounded and evenly distributed on the surface of silica, a nonporous solid support. The enzyme kinetics between the immobilized and free endoxylanases was estimated to be uncompetitive, when plotting double-reciprocal plots against xylan concentrations and endoxylanase activities. These results suggest that the higher activity of the immobilized endoxylanase may be due to increased formation of enzyme-substrate complex, because of the easy accessibility of the immobilized enzyme to the polysaccharide-xylan as a high molecular weight substrate.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.185-195
• /
• 1994

This study was conducted to evaluate the healing potential of hydroxyapatite and demineralized freeze dried bone in 5 dogs. Chronic periodontitis was induced by ligating elastic wire randomized as follows. The group in which only flap operation was performed was used as control. The group in which flap operation using nonresorbable nonporous hydroxyapatite (Orthomatrix)was performed was used as experimental I. The group which flap operation using resorbable porous hydroxyapatite (Biocoral) was performed as experimental II. The group in which flap operation using demineralized freeze-dried bone was performed was used as experimental III. Thereafter dogs serially sacrificed at the 1,2,4 and 8 weeks and the specimens were prepared, and stained with Hematoxilin-Eosin stain for the light microscopic evaluation. The results of the this study were as follows : 1. Control group : progressive inflammatory cell infiltration till 4 weeks and epithelial undergrowth. 2. Group I. : epithelial undergrowth and new bone formed with fibrous margin around HA granule. 3. Group II. : no epithelial undergrowth and direct bone formation at the porous granule 4. Group III. : could not see epithelial undergrowth but obviously new cementum formation.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.331-336
• /
• 2021

Vacuum metal deposition(VMD) using gold and zinc is known as a very sensitive technique of developing latent fingerprints on nonporous surfaces by excellent malleability and ductility of gold. However, VMD produces empty print which cannot be identified. There is only presumption about the cause of occurrence of empty print, the exact cause is not known. In this study, we experiment on the freshness of fingerprints and sensitivity of techniques that are estimated as the factors causing empty print, based on this, we suggest cyanoacrylate fuming is effective to redevelop empty print.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.185-197
• /
• 2019

Deactivation of porous photocatalytic materials was studied using three types of microstructured particles: macroporous titania particles, titania microspheres, and porous silica microspheres containing CNTs and $TiO_2$ nanoparticles. All particles were synthesized by emulsion-assisted self-assembly using micron-sized droplets as micro-reactors. During repeated cycles of the photocatalytic decomposition reaction, the non-dimensionalized initial rate constants (a) were estimated as a function of UV irradiation time (t) from experimental kinetics data, and the results were plotted for a regression according to the exponentially decaying equation, $a=a_0\;{\exp}(-k_dt)$. The retardation constant ($k_d$) was then compared for macroporous titania microparticles with different pore diameters to examine the effect of pore size on photocatalytic deactivation. Nonporous or larger macropores resulted in smaller values of the deactivation constant, indicating that the adsorption of organic materials during the photocatalytic decomposition reaction hinders the generation of active radicals from the titania surface. A similar approach was adopted to evaluate the activation constant of porous silica particles containing CNT and $TiO_2$ nanoparticles to compare the deactivation during recycling of the photocatalyst. As the amount of CNTs increased, the deactivation constant decreased, indicating that the conductive CNTs enhanced the generation of active radicals in the aqueous medium during photocatalytic oxidation.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.80-88
• /
• 2023

Fingerprints play a crucial role in the identification of potential suspects in criminal cases. However, determining the actual time, i.e., the time at which the fingermark was deposited, is challenging. Herein, we investigated the persistence and aging of fingerprints over time by observing the time evolution of latent fingerprints on a polystyrene box stored in a dark room. Fingerprint samples that were stored for up to two years could be detected with maximum accuracy using a black iron-oxide-based emulsion (black emulsion). To estimate the time of fingerprint deposition, fingerprint aging was studied by analyzing the lipid components of the fingerprints after their development. Cholesterol and squalene were selected as indicators of fingerprint aging, and their ratio was estimated to assess aging. In the case of fingerprint samples stored in a dark room for up to one month after deposition, the cholesterol/squalene ratio was approximately 0.01; it increased gradually to ≥ 0.1 over six months. A substantial reduction in the levels of cholesterol and squalene from the initial levels was also noted. Cholesterol and squalene were not detected after one year of storage. Thus, the extent of aging could be determined by analyzing the aging indicators for up to six months. Two cases that could cause error in the estimation of the fingerprint deposition time, namely, heating of the fingerprint sample before development and storage of the developed fingerprints in a dark room, were also investigated.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.317-343
• /
• 1977

This study was carried out to obtain the informations about evaporation from pot, soil temperature and soil atmosphere composition in pot, and the effect on the growth of nine ornamental species using seven different containers. The investigated containers were clay pot(CP), clay pot painted in green(CP-P), varnished clay pot(CP-V), polyethylene film inserting in clay pot(CP-PI), clay pot mulched with black polyethylene film(CP-PM), porcelain pot(POP), and plastic pot(PLP). Nine ornamental species were balsam(Impatiens balsamina), chrysanthemum(Chrysanthemum morifolium), cosmos(Cosmos bipinatus), English ivy(Hedera helix), geranium(Pelargonium zonale), kochia(Kochia scoparia var. trichophila), marigold(Tagetes patula), ornamental kale(Brassica oleraceae var. acephala), and salvia (Salvia splendens). The results obtained are summarized as follows: 1. Dry weight of all tested species grown in PLP, POP, CP-P, CP-V and CP-PI was heavier than that of CP. 2. Plant height in nine tested species grown in PLP, POP, CP-P, CP-V, and CP-PI was taller than that of CP. 3. Geranium grown in PLP, POP, CP-P, and CP-V gave more number of leaf than that of CP. 4. The number of flower in balsam grown in PLP, POP, CP-P, CP-V and CP-PI was more than that of CP. The result from marigold was very similar to this tendency. Spike length and floret number in salvia gave the same tendency, but its spike number was not different among containers used. 5. The average diurnal evaporation from PLP and POP was about 43% of that of CP. About two third of total evaporation from CP was through pot wall. 6. The evaporation rate from the slowest to the highest was PLP, POP, CP-P, CP-V, CP-PI, CP-PM and CP. Containers inhibiting evaporation through pot wall hold more soil moisture than CP from one day after water supply. 7. The more evaporative water-loss from containers gave the lower soil temperature. The variation of soil temperature among containers was higher during the day than the night. 8. The $O_2$ concentration of soil atmosphere in CP was higher than that of nonporous containers, and the difference between them was 0.40-1.12%. The range of the $O_2$ concentration 17.95~19.62%. The $CO_2$ concentration of soil atmosphere in CP was lower than that of nonporous containers, and its range was 0.59-1.76%. This deviation in soil atmosphere composition did not influenced on the growth of plants. 9. There was a possitive correlation between the amount of soil water and the plant growth. 10. Plant grown on CP gave more total nitrogen content in top growth than that on PLP. C/N ratio was somewhat low in plant on CP. From the above results, $O_2$ and $CO_2$ concentration in soil atmosphere did not gave enough deviation to the extent which affect the plant growth. The effect of soil moisture on the plant growth using different containers was the far-most significant factor from this investigation. Therefore, it was obious that the utilization of the nonporous container might save the cost for water supply and reduce the production cost of the pot-grown ornamental plant in Korea eventually.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.300-310
• /
• 1996

Recently, there have been attempts to obstruct the dentinal tubules and remove the smear layer by way of laser irradiation in the root canal during endodontic treatment. This treatment was designed to make the root canal to be nonporous. Using 33 extracted single rooted teeth, 30 teeth were divided into 3 groups (10 each), and 3 teeth were used as samples for SEM. Using Nd : YAG laser, the control group was not irradiated, experimental group l(1W group) was irradiated with 1W, 15pps, 15sec., 3 times, 6.7mJ and experimental group 2(3W group) was irradiated with 3W, 15pps, 15sec., 3 times 20mJ. Thereafter the roots were immersed in methylene blue for 8 hours, and the dye infiltration pattern was observed under stereomicroscope and canal wall surface change was observed under SEM. The results are as following ; 1. As a result of evaluating the dye infiltration rate of the apical and middle 1/3, there was significant difference between control group and 1W group, control group and 3W group and there was no significant difference between 1 W group and 3W group. 2. In each group, as a result of comparing the dye infiltration rate of the apical and middle 1/3, there was no significant difference in control and 1W group but significant difference in 3W group. 3. In the control group smear layer was scarecely found and many dentinal tubules were found to be open. 4. In the 1W group, the number of dentinal tubules were decreased and gradual changes of the dentin surface could be seen and 3W group, almost no dentinal tubules could be found and the dentin surface was changed a little more and showed signs of partial fusion.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.477-482
• /
• 2002

In order to control the micro-pore structure of glassy carbon (GC), an activation agent of KOH was introduced as the glassy carbon was prepared from phenolic resin with a curing agent of phosphoric acid. The yield and properties of GC were investigated as a function of KOH content. Although the GC produced without KOH had nonporous structure except the trace of bubble formation, the GC with KOH had very porous structure. The surface area of GC with KOH increased continuously up to 870 $m^2$/g with the increase of KOH content. The carbonization yield and apparent density measured in water reduced from 40 to 15% and iron 1.5 to 0.9 g/$cm^3$, respectively, and the electrical resistivity increased from $50{\times}10^{-4}$ to $60{\times}10^{-4}$$\Omega$.cm with the increase of KOH content.