• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.246-250
• /
• 1996

In optical soliton transmission systems with nonlinear dispersive materials, which is utilized for ultra-long and high bit rate transmission, it is shown that the value of initial time difference between adjacent solitons is analyzed for optimum bit rate. The method is inducted by uncorrelation condition with minimum interaction forces in initial covariance coefficient between adjacent solitons. When the initial time difference is 6 times of soliton pulse width by the results, it is shown that the reliability is maintained with more than 90% within transmission length of soliton period. multiplied by 93.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.556-560
• /
• 1987

To enhance the breakdown properties of low voltage-oriented ZnO varistor, the samples were fabricated with the amounts of si-oxides and the sintering conditions. And then, to lower the breakdown voltage the $TiO_2$-added samples were fabricated. We investigated the nonlinear exponent, the nonlinear resistance and the V-I characteristics of samples. And we discussed with microstructures by use of SEM and the position of Si by EDS. Si-oxides, especially, largely enhanced the nonlinear exponent. In this case optimum sintering condition was $1200-1250^{\circ}C$-1hr and $TiO_2$ addition lowered the breakdown voltage.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.565-568
• /
• 1987

In order to determine the standard composition of ZnO varistor with higher nonlinearity, various contents of $MnO_2$, $Co_2O_3$ were added to ZnO-1.0m/o $Bi_2O_3$ system. Also, samples that contained small amount of Sb, Si-oxides in standard composition determined before were fabricated. As a result, the standard composition of higher nonlinearity-oriented ZnO varistor was shown as ZnO-1.0 m/o $Bi_2O_3$-1.0m/o $MnO_2$-1.0m/o $Co_2O_3$ and $Sb_2O_3$ largely enhanced nonlinear exponent and nonlinear resistance, hut SiO largely enhanced nonlinear exponent only.

• Smart Structures and Systems
• /
• v.22 no.1
• /
• pp.71-79
• /
• 2018

The nonlinear vibration analysis of a magneto-rheological elastomer (MRE) sandwich plate is conducted experimentally. Experiments have been performed in order to construct the frequency-response curves in the vicinity of the fundamental natural frequency of an MRE sandwich plate (plate A) in either the absence or presence of a localised external magnetic field at 3 different geometrical locations, for both small and medium magnetic fields. Furthermore, experiments have also been conducted on a pure aluminium plate (plate B) with an equal thickness to the MRE sandwich plate (plate A) in order to examine the influence of the MRE layer on the nonlinear dynamics of the system. An electrodynamic shaker was used to directly force each system and the displacement at the centre of the plate was measured. Meanwhile, permanent magnets were used to apply a localised magnetic field for the experiments where the MRE sandwich plate was subject to an external magnetic field. It was observed all the MRE systems displayed strong hardening-type nonlinear behaviour, however, with increasing magnetic field this behaviour transitioned to a weak hardening-type nonlinearity.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.22-23
• /
• 2009

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.1
• /
• pp.15-20
• /
• 2017

The small turbocharger for the automotive application is designed to operate up to 200,000 rpm to increase system efficiency. Because of high rotation speed of turbocharger, floating ring bearing are widely adopted due to its low friction loss and high rotordynamic stability. This paper presents a linear and nonlinear analysis model for a turbocharger rotor supported by a semi-floating ring bearing. The rotordynamic model for the turbocharger rotor was constructed based on the finite element method and fluid film forces were calculated based on the infinitely short bearing assumption. In linear analysis, we considered fluid film force as stiffness and damping element and in nonlinear analysis, the fluid film force was calculated by solving the time dependent Reynolds equation. We verified the developed theoretical model by comparing to modal test results of test rotors. The analysis results show that there are two unstable modes, which are conical and cylindrical modes. These unstable modes appear as sub-synchronous vibrations in nonlinear analysis. In nonlinear analysis, frequency jump phenomenon demonstrated when vibration mode is changed from conical mode to cylindrical one. This jump phenomenon was also demonstrated in the test. However, the natural frequency measured in the test differs from those obtained using nonlinear analysis.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.591-595
• /
• 2000

Sound absorbing characteristics of poroelastic materials is known to be greatly affected by high intensity acoustic waves. However, this effect has not been considered yet. In this study, the extended semilinear model based on Biot's theory for the porous materials and the characteristics of nonlinear waves in poroelastic sound absorbing materials were introduced. The expressions for the finite-amplitude acoustic plane waves were presented. By combining each nonlinear wave with appropriate matching conditions, we could investigate the effects of finite-amplitude acoustic waves on absorption characteristics of poroelastic materials. In the most ideal case considered in this paper, the absorption coefficient was found to become larger than that of linear incident waves. It was shown that the absorption coefficient became greater especially as frequency goes higher and as distance from the source goes larger. These phenomena may be inferred to result from 'dissipation effects due to nonlinearity'. This finding may have important implications for high intensity noise control.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.760-768
• /
• 2017

The transition temperature shift (TTS) of the reactor pressure vessel materials is an important factor that determines the lifetime of a nuclear power plant. The prediction of the TTS at the end of a plant's lifespan is calculated based on the equation of Regulatory Guide 1.99 revision 2 (RG1.99/2) from the US. The fluence factor in the equation was expressed as a power function, and the exponent value was determined by the early surveillance data in the US. Recently, an advanced approach to estimate the TTS was proposed in various countries for nuclear power plants, and Korea is considering the development of a new TTS model. In this study, the TTS trend of the Korean surveillance test results was analyzed using a nonlinear regression model and a mixed-effect model based on the power function. The nonlinear regression model yielded a similar exponent as the power function in the fluence compared with RG1.99/2. The mixed-effect model had a higher value of the exponent and showed superior goodness of fit compared with the nonlinear regression model. Compared with RG1.99/2 and RG1.99/3, the mixed-effect model provided a more accurate prediction of the TTS.

• Composites Research
• /
• v.25 no.6
• /
• pp.217-223
• /
• 2012

This study investigates a geometrical nonlinear dynamic behaviors of laminated skew plates made of advanced composite materials (ACM). Based on the first-order shear deformation plate theory (FSDT), the Newmark method and Newton-Raphson iteration are used for the nonlinear dynamic solution. The effects of cutout sizes, skew angles and lay up sequences on the nonlinear dynamic response for various parameters are studied using a nonlinear dynamic finite element program developed for this study. The several numerical results were in good agreement with those reported by other investigators for square composite plates with or without central cutouts, and the new results reported in this paper show the significant interactions between the cutout, skew angles and layup sequence in the laminate. Key observation points are discussed and a brief design guideline of skew laminates is given.

• Structural Engineering and Mechanics
• /
• v.70 no.5
• /
• pp.601-621
• /
• 2019

This study presents a comprehensive nonlinear dynamic approach to investigate the linear and nonlinear vibration of sandwich plates fabricated from functionally graded materials (FGMs) resting on an elastic foundation. Higher-order shear deformation theory and Hamilton's principle are employed to obtain governing equations. The Runge-Kutta method is employed together with the commercially available mathematical software MAPLE 14 to solve the set of nonlinear dynamic governing equations. Method validity is evaluated by comparing the results of this study and those of previous research. Good agreement is achieved. The effects of temperature change on frequencies are investigated considering various temperatures and various volume fraction index values, N. As the temperature increased, the plate frequency decreased, whereas with increasing N, the plate frequency increased. The effects of the side-to-thickness ratio, c/h, on natural frequencies were investigated. With increasing c/h, the frequencies increased nonlinearly. The effects of foundation stiffness on nonlinear vibration of the sandwich plate were also studied. Backbone curves presenting the variation of maximum displacement with respect to plate frequency are presented to provide insight into the nonlinear vibration and dynamic behavior of FGM sandwich plates.