• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.854-861
• /
• 1999

Seventeen pregnant ewes (8 superovulated and 9 non-superovulated) were used to study correlations of maternal serum progesterone concentrations with uterine and fatal weights at weeks 7 and 15 of pregnancy. Statistical analyses indicated that uterine growth during the first 7 weeks of pregnancy highly associated with maternal serum progesterone concentration (r=0.87 and 0.85, with wet and dry uterine weights, respectively). Ewes with higher maternal serum progesterone concentrations had higher total and average fetal weights at week 7 of pregnancy (r=0.89 and 0.86, respectively). At week 7 of pregnancy, wet and dry uterine weights highly correlated (p<0.01) with total and average fatal weights (r=0.99 and 0.80, 0.98 and 0.75, respectively). Maternal serum progesterone concentrations, however, did not correlate (p>0.05) with wet and dry uterine weights (r=0.36 and 0.47, respectively) and with total and average fetal weights (r=0.20 and 0.58, respectively) at week 15 of pregnancy. However, wet and dry uterine weights had high correlation with total fetal weight (r=0.97 and 0.95, respectively), without significant correlation with average fetal weight. It was concluded that during the embryonic stage of pregnancy, the levels of maternal progesterone were highly correlated with uterine and fetal growths, while during the fetal stage pregnancy, the correlation became less evident.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.28-32
• /
• 1976

This study was carried out to know the adaptability of barley flour, potato flour and white ash as extender and filler of urea-formaldehyde resin for plywood as a substitute material of wheat flour. The extenders and filler used at this study were extended by several groups of percentages. Shear strength, moisture contents, and specific gravities were compared among tested groups. The results obtained are summarized as follows. 1) Wet and dry shear strength of plywoods extended by 10% barley flour, 30% potato flour, and wheat flours were shown better results than non extended plywoods. 2) There was no significant difference between plywoods extended until 50% barley flours and non extended plywoods. 3) Shear strength of plywoods extended by 50% potato and 100% barley flours were shown worse result than non extended. 4) Dry and wet shear strength of plywoods extended by white ash were shown worst result. 5) The plywoods extended by potato flours were shown not only better shear strength, but also considered more profitable cost for extending.

• Asian Journal of Atmospheric Environment
• /
• v.12 no.1
• /
• pp.67-77
• /
• 2018

To investigate the effects of forest and the surrounding natural and anthropogenic sources on the bulk depositions on forested land, this study examined differences in ion concentrations between wet-only and bulk samples at two forested sites in Japan. The surrounding natural and anthropogenic sources at each site were different; Shirasaka is in a rural area and Tanashi is an urban environment. The volume weighted (vw) mean concentrations of $K^+$ and $Ca^{2+}$ in the bulk samples were significantly (p<0.05) higher than those in the wet-only samples at both sites. The forest canopy and a nearby incineration plant were hypothesized to be the main sources of $K^+$ contaminants at Shirasaka and Tanashi, respectively. The transport of sea salt and urban dust may explain the presence of enriched $Ca^{2+}$ concentrations in the bulk samples at Shirasaka and Tanashi, respectively. The $NH_4{^+}$ concentrations in the Shirasaka bulk samples were significantly (p<0.05) lower than those in the wet-only samples. The vw mean $SO{_4}^{2-}$ and $NO_3{^-}$ concentrations in both sample types were not significantly different at either site. This study demonstrated that the ion concentration differences between wet-only and bulk samples were affected by nearby natural and anthropogenic sources even at forest sites, similar to previous findings for non-forested locations. However, the $K^+$ concentration differences between wet-only and bulk samples may be higher owing to forest sources, even in the absence of anthropogenic sources.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.266-266
• /
• 2017

In recent years, adoption of the System of Rice Intensification (SRI) is spreading in most Asian countries, and more recently in Cambodia is one of the Asian countries with high adoptions of SRI. We conducted on-farm experiment to investigate the effects of SRI on rice growth and yield in the farmers' fields in rainfed region of southern Cambodia. The study was undertaken in rainfed lowland fields of Popel commune ($11^{\circ}$ 04' 67" N, $104^{\circ}$ 40' 79" E) of Tram Kak District in Takeo Province during the wet seasons in 2012, 2013, and 2015. A total of 32 on-farm experiments were conducted during the wet seasons for three years of 2012 (11 fields), 2013 (8 fields), and 2015 (13 fields). Across the three years of study, SRI produced significantly greater plant biomass and grain yield than Non-SRI. The yield increase was mostly ascribed for the increased number of grains per land area, which was due to the increased number of spikelets per panicle rather than the number of panicles per land area. With no significant difference between SRI and Non-SRI with respect to seedling age, the greater number of grains per panicle was accounted for by the reduced planting density and increased amount of manure application in SRI than Non-SRI fields. It was found that the greater manure application has increased soil nitrogen content in SRI and Non-SRI fields. While SRI did not increase the number of panicles per land area, it did increase the number of panicles per hill.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.3
• /
• pp.103-112
• /
• 2017

In order to transform arsenopyrite into pyrrhotite and to decrease As content by less than 2,000 mg/kg, pulp sample and non-magnetic pulp sample were heated in a microwave oven at different heating times and were separated through wet-magnetic separation. As the microwave heating time increased, the phase of pyrrhotite was extended to become arsenopyrite entirely. The melting pores and micro-cracks occurred on the pyrrhotite due to hot spot phenomenon with microwave heating. The heated raw pulp sample (As content : 19,970.13 mg/kg) and non-magnetic pulp sample (As content : 19,970.13 mg/kg) which were heated in a microwave oven for 10 minutes were separated through wet-magnetic separation and magnetic fraction containing less than 2,000 mg/kg of As content was recovered only from the heated sample of magnetic separation. It was discovered that for the sulfide complex ore with As penalty imposed on, if microwave heating and wet-magnetic separation are effectively utilized, magnetic fraction. We expect to be able to obtain ore minerals with an arsenic content below the penalty charge.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.141-145
• /
• 2000

The daily fluctuations of occurrence rate and standing stock of zooplankton, the relationship between dry and wet weights of gelatinous zooplankton, and the size distributions of body length and body weight of zooplankton were investigated in the sea around Cheju Island from September 1996 to August 1997. Mean ratios of wet to dry weights were 66.46 (raging from 47.05 to 84.64) in the gelatinous zooplankton and 10.89 (raging 9.21 to 14.85) in the non-gelatinous zooplankton which consisted of crustaceans such as copepods, decapods, mysids, and ostracods etc. Rarios of gelatinous zooplankton to non-gelatinous zooplankton (G/NG) in wet weight was 0.99 (0.28-2.30), indicating high occurrence rate of gelatinous in the study area. The seasonal and diel fluctuations of the gelatinous zooplankton were very large, and G/NG ratios greatly varied with seasons and dat/night cycles. The size distributions of body length of zooplankton (250-500 urn: 35.5% in maximum), and wet (0.1-0.2 mg: 34.4%) and dry weights (0.025-0.05 mg: 44.8%) showed much difference depending composition of the zooplankton groups. These results show that quantitative estimations of zooplankton produc- tivity only based on wet weight should be corrected to better understand and evaluate marine resources in Korean waters.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.557-560
• /
• 2009

In this study, a new wet etching method and the solution for thinning the glass with the thickness below $100{\mu}m$ were investigated. For the preparation of etching solution with low hydrofluoric acid, it was effective to use $NH_4F$ or $NH_4HF_2$ as a main ingredient with the addition of sulfuric acid or nitric acid. Influence of the composition of mixed acid solution and the temperature on the etching rate was investigated. The addition of anionic surfactant provides the function to prevent the adhesion of sludge generated by the etching reaction. A new wet etching pilot device equipped with streaming generation parts was used to test etching of commercial non-alkali glass and soda lime glass. The non-alkali glass with the thickness of 640 ${\mu}m$ and soda lime glass with the thickness of $500{\mu}m$ were etched to $45{\mu}m$ and $100{\mu}m$, respectively, by using the pilot device. After the etching by pilot device, the roughness degree of the glass surface was maintained at $0.01{\sim}0.02{\mu}m$.

• Mass Spectrometry Letters
• /
• v.11 no.2
• /
• pp.36-40
• /
• 2020

Untargeted metabolomics is a useful tool for drug development focusing on novel chemotherapeutic and chemopreventative agents against cancer cells. In recent years, quadrupole time of flight liquid chromatography-mass spectrometry (Q-TOF LC/MS)-based untargeted metabolomic approaches have gained importance to evaluate the effect of these agents at the molecular level. The researchers working on cell culture studies still do not apply standardized methodologies on sample preparation for untargeted metabolomics approaches. In this study, the rough and wet lysis techniques performed on MCF-7 breast cancer cells were compared with each other via the Q-TOF LC/MS-based metabolomic approach. The C18 and hydrophilic interaction liquid chromatography (HILIC) columns were used for the separation of the metabolites in MCF-7 cell lysates. 505 peaks were detected through the HILIC column and 551 peaks were found through the C18 column for the wet lysis technique. This situation supported by the base peak chromatograms showed that the wet lysis technique allowed us to extract higher number of non-polar metabolites. Almost equal number of metabolites was found for the C18 and HILIC columns (697 peaks for the HILIC column and 695 peaks for the C18 column) when the rough lysis technique was used. However, the intensities of polar metabolites were higher for the rough lysis technique on base peak chromatograms for both the HILIC and C18 columns. Although cell lysis technique, which is the first step in the sample preparation for cell culture studies, does not cause dramatic differences in the number of the detected metabolite peaks, it affects the polar and non-polar metabolite ratio significantly. Therefore, it must be considered carefully especially for in vitro drug development studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3698-3707
• /
• 2015

In this study, wet surface heat transfer and friction characteristics of non-symmetric slit-finned heat exchangers are experimentally investigated. Louver-finned heat exchangers are also tested for comparison purpose. The effect of fin pitch on j and f factor is negligible. Louver fin samples yield higher j and f factors than slit fin samples. For one row, j and f factors of louver fin are 27% and 31% higher than those of slit fin. For two row, j and f factors of louver fin are 15% and 30% higher. Both j and f factor decrease as the number of tube row increases. For one row, average j/f ratios of slit fin samples are 3.4% larger than those of louver fin samples. For two row, average j/f ratios of slit fin samples are 11.5% larger. A new correlation was developed using the present data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.243.1-243.1
• /
• 2016

Recently, many groups have attempted to fabricate 3-dimensional (3D) structures of GaN such as pyramids, rods, stripes and annulars. Since quantum structures on non-polar and semi-polar planes of 3D structures have less influence of internal electric filed, multi quantum wells (MQWs) formed on those planes have high quantum efficiency. Especially, pyramidal and annular structures consist of various crystal planes with different emission wavelength, providing a possibillity of phosphor-free white light emtting diodes (WLEDs).[1] However, it still has problem to obtain high color rendering index (CRI) number because of narrow-band emission and poor indium composition caused by the formation of few number of facets during metal-organic chemical vapor deposition growth.[2] If we can fabricate 3D structure having more various facets, we can make broad-band emittied WLEDs and improve CRI number. In this study, we suggest a simple method to fabricate 3D structures having various facet and containing high indium composition by means of a combination of metal-organic chemical vapor deposition and wet chemical etching techniques.