• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.41-49
• /
• 2012

The objective of this study is to investigate the characteristics of the location and prospects of the bear shelves built by Asiatic black bears in the Jirisan National Park. Previous researchers have been analyzed bear shelves in terms of places for resting and eating, but we are going to analyze based on the prospect-and-refuge theory. Characteristics of the sites of bear shelves are measured through field survey and topographic analysis by using digital elevation model (DEM). The normalized difference vegetation index (NDVI) is used to evaluate the optimum location of bear shelves in terms of crown density. Man-made objects are identified by viewshed analysis based on geographical information system (GIS). Findings of this paper can be summarized as follows. First, most bear trees are located deep inside of the mountainous national park, slopes of 30~40 degrees, altitude of 400~1,200m, and relatively low vegetation density with NDVI value of 0.4~0.6 compared to the average NDVI of the park. Second, the average height of bear shelves is 12.44m, or 74% of the average height of bear trees. They are located at suitable places to observe nearby trails and other park facilities. Third, man-made objects within the 100m radius of bear trees include lodge, bear training center, beekeeping camp, and hiking trails. Thus we may temporarily conclude that one of the main criteria of the bear tree selection in the park has been to identify optimum places for the monitoring of human activities in their habitat.

• Journal of Fashion Business
• /
• v.8 no.2
• /
• pp.56-68
• /
• 2004

Korean fashion industry is not exceptional in terms of positive offense of multinationals and management circumstance of corporations which is changeful momentarily. Accelerated by continuous industry growth and particular policy to promote fashion industry, Korean fashion industry has been inflated quantitatively. In this paper the author presents a effective model which is applicable to the area of outsourcing in Korean men's wear industry incomplete and non-systematic. Studying and analyzing the state of outsourcing in other industries which use advanced outsourcing systems, the author suggests how to customize their advanced systems to men's wear industry. For the successful outsourcing, fashion brands have to recognize the specialized ability of outsourcing companies, go into partnership with them horizontally and concede their own value, not only for cost reduction. On the other hand, outsourcing companies should mediate between two parties, fashion brands and manufacturers, have the ability to create new designs, be able to present merchandises that fashion brands want, invest money in developing creative designs and new products which have good quality, and handle many manufactures specialized in their own areas to play an important role in mediating fashion brand sand manufactures. In this paper, the author tries to study forward direction of specialized outsourcing companies theoretically and is going to apply this theory to men's wear industry to make Korean fashion industry survive in international market successfully.

• Mycobiology
• /
• v.42 no.4
• /
• pp.361-367
• /
• 2014

Makgeolli, also known as Takju, is a non-filtered traditional Korean alcoholic beverage that contains various floating matter, including yeast cells, which contributes to its high physiological functionality. In the present study, we assessed the levels of ${\beta}$-glucan and glutathione in various yeast strains isolated from traditional Korean Nuruk and selected a ${\beta}$-glucan- and glutathione-rich yeast strain to add value to Makgeolli by enhancing its physiological functionality through increased levels of these compounds. Yeast ${\beta}$-glucan levels ranged from 6.26% to 32.69% (dry basis) and were strongly species-dependent. Dried Saccharomyces cerevisiae isolated from Nuruk contained $25.53{\mu}g/mg$ glutathione, $0.70{\mu}g/mg$ oxidized glutathione, and $11.69{\mu}g/g$ and $47.85{\mu}g/g$ spermidine and L-ornithine monohydrochloride, respectively. To produce functional Makgeolli, a ${\beta}$-glucan- and glutathione-rich yeast strain was selected in a screening analysis. Makgeolli fermented with the selected yeast strain contained higher ${\beta}$-glucan and glutathione levels than commercial Makgeolli. Using the selected yeast strain to produce Makgeolli with high ${\beta}$-glucan and glutathione content may enable the production of functional Makgeolli.

• Journal of Welding and Joining
• /
• v.26 no.4
• /
• pp.79-84
• /
• 2008

Use of sheet metal structure is increased in various fields such as automobile, aerospace and communication equipment industry. When this structure is welded, welding distortion is generated due to the non-uniformity of temperature distribution. Recently welding distortion becomes a matter of great importance in the structure manufacture industry because it deteriorates the product's quality by bringing about shape error. Accordingly many studies for solving the problems by controlling the welding distortion are being performed. However, it is difficult to remove all kinds of distortion by welding process, though various kinds of methods for reducing distortion are applied to production. Consequently, straightening process is operated if the high precision quality is requested after welding. The local heating method induces compression plastic deformation by thermal expansion in the heating stage and then leaves constriction of length direction in the cooling stage. Accordingly, in the case of sheet metal structure, straightening effect is expected by heating for the part of distortion. This study includes numerical analysis of straightening effect by the local heating method in distortion comes from production of welded sheet metal structure. Particularly straightening effect followed by dimensions of heating area is analyzed according to the numerical analysis. The numerical analysis is performed by constructing 3-dimensional finite element model for 0.4mm stainless steel-sheet metal. Results of this study confirm that straightening effect changes as heating area increases and the optimum value of heating area that proves the maximum straightening effect exists.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.711-716
• /
• 2004

Gamma irradiation was applied to dried pollack to improve its microbiological quality and evaluate quality stability of irradiated samples. Thermoluminescence (TL) properties of minerals separated from irradiated samples were measured for possible use in identifying irradiation treatment. Dried pollack was packaged in commercial unit (PVC film, 0.06 mm thickness) and stored at $15{\pm}1^{\circ}C$ for 6 months. Samples showed over $10^4\;CFU/g$ in total aerobic bacteria or yeasts&molds, which increased during storage, reaching $10^6-10^7\;CFU/g$ at 3rd month of storage. Irradiation at 3 kGy was effective for improving hygienic quality for 6 months, keeping microbial population under 20 CFU/g. Gamma irradiation at 3 kGy or less did not significantly influence physicochemical quality attributes, such as browning, TBA value, volatile basic nitrogen, trimethylamine, and sensory properties, whereas storage time remarkably induced quality changes of dried pollack. TL analysis was proved suitable for identifying irradiated from non-irradiated samples over 6 months of storage.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.95-101
• /
• 2009

Among the adaptive noise cancellers (ANC), the least mean square (LMS) algorithm has probably become the most popular algorithm because of its robustness, good tracking properties, and simplicity of implementation. However, it has non-uniform convergence and a trade-off between the rate of convergence and excess mean square error (EMSE). To overcome these shortcomings, a number of variable step size least mean square (VSSLMS) algorithms have been researched for years. These LMS algorithms use a complex variable step method approach for rapid convergence but need high computational complexity. A variable step approach can impair the simplicity and robustness of the LMS algorithm. The proposed instantaneous gain control (IGC) algorithm uses the instantaneous gain value of the original signal and the noise signal. As a result, the IGC algorithm can reduce computational complexity and maintain better performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.483-490
• /
• 2015

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. It is shown that it is possible to do likelihood inference for software reliability models based on finite failure model and non-homogeneous Poisson Processes (NHPP). For someone making a decision about when to market software, the conditional failure rate is an important variables. The infinite failure model are used in a wide variety of practical situations. Their use in characterization problems, detection of outlier, linear estimation, study of system reliability, life-testing, survival analysis, data compression and many other fields can be seen from the many study. Statistical process control (SPC) can monitor the forecasting of software failure and thereby contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, proposed a control mechanism based on NHPP using mean value function of Musa-Okumo and Power law type property.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.6
• /
• pp.503-511
• /
• 2013

This paper presents a speech enhancement method using non-negative matrix factorization. In training phase, we can obtain each basis matrix from speech and specific noise database. After training phase, the noisy signal is separated from the speech and noise estimate using basis matrix in enhancement phase. In order to improve the performance, we model the change of encoding matrix from training phase to enhancement phase using independent Gaussian distribution models, and then use the constraint of the objective function almost same as that of the above Gaussian models. Also, we perform a smoothing operation to the encoding matrix by taking into account previous value. Last, we apply the Log-Spectral Amplitude type algorithm as gain function.

• Structural Engineering and Mechanics
• /
• v.24 no.6
• /
• pp.709-725
• /
• 2006

In this paper the buckling and post-buckling behavior of slender bars under self-weight are studied. In order to study the post-buckling behavior of the bar, a geometrically exact formulation for the non-linear analysis of uni-directional structural elements is presented, considering arbitrary load distribution and boundary conditions. From this formulation one obtains a set of first-order coupled nonlinear equations which, together with the boundary conditions at the bar ends, form a two-point boundary value problem. This problem is solved by the simultaneous use of the Runge-Kutta integration scheme and the Newton-Raphson method. By virtue of a continuation algorithm, accurate solutions can be obtained for a variety of stability problems exhibiting either limit point or bifurcational-type buckling. Using this formulation, a detailed parametric analysis is conducted in order to study the buckling and post-buckling behavior of slender bars under self-weight, including the influence of boundary conditions on the stability and large deflection behavior of the bar. In order to evaluate the quality and accuracy of the results, an experimental analysis was conducted considering a clamped-free thin-walled metal bar. As this kind of structure presents a high index of slenderness, its answers could be affected by the introduction of conventional sensors. In this paper, an experimental methodology was developed, allowing the measurement of static or dynamic displacements without making contact with the structure, using digital image processing techniques. The proposed experimental procedure can be used to a wide class of problems involving large deflections and deformations. The experimental buckling and post-buckling behavior compared favorably with the theoretical and numerical results.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.277-285
• /
• 2013

This study focused on the state that CMS(Content Management System) is not widely implemented in Korea and many companies lack a sense of the necessity. The author proceeded as follows. First of all, the definition of CMS was mentioned. Next, the history and current state of CMS in domestic and foreign nations were proposed. And the methodology and rationales were explained to use CMS effectively. The results may be summarized as follows. First, the appropriate design should be processed. Second, value-oriented management (not technology-oriented) should be aimed. Third, feedback by publicity and responses should be activated. When a content provider adopts CMS, the provider should take special care of long-term communications and trust building with non-technical users.