• 한국정보과학회논문지:소프트웨어및응용
• /
• 제33권10호
• /
• pp.868-876
• /
• 2006

2차원 평면 입력을 통한 모델링에서는 입력 값을 3차원 데이타로 바꾸기 위한 기능과 메뉴들이 필요하지만 가상공간 디자인을 위한 3차원 입력 시스템은 입력 값을 곧바로 3차원 데이타로 변환될 수 있다. 하지만 3차원 입력시스템에서 효율적인 곡면 모델링 방법, 특히 곡면 변형 방법은 제안되지 않고 있다. 본 논문에서는 기존의 변형방법이 3차원 입력시스템에서 적용되었을 때 발생할 수 있는 문제점을 제시한다. 그리고 디자이너가 접근하기 쉬운 목표곡선을 이용한 변형을 제안한다. 이와 같은 3차원 목표곡선을 이용한 변형을 통해 디자이너가 보다 쉽게 3차원 입력시스템에 접근하여 가상공간 스케칭 및 디자인을 구현할 수 있다.

• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.51-62
• /
• 1998

본 연구에서는 공동수조(Cavitation Tunnel) 실험용 모형프로펠러의 5축 가공을 위해 Windows NT와 PC 환경하에서 작동하는 CAD/CAM 시스템을 개발하였다. 본 시스템은 그 성격에 따라 크게 4가지의 모듈로 구성되어 있다. 먼저, 프로펠러 설계를 위해 기존에 사용하고 있던 텍스트 위주의 S/W(Text based S/W)를 그래픽화 하여 통합함으로써 설계의 효율을 향상시켰다. 설계의 결과로 출력되는 점 데이터는 NURBS(Non-Uniform Rational B-Spline) 방법을 이용하여 복합곡면 (Composite Surface)으로 모델링하였고 가공은 황삭, 중삭, 정삭 및 잔삭으로 수행하였다. 각각의 경우에 있어서 공구와 공작물의 충돌 및 간섭을 체크하여 공구경로를 산출하였으며 그것을 역기 구학 해석하여 NC 데이터로 변환하였다. 또한, 가공의 상태를 화면상에서 검증하기위해 공구 및 공작물을 그래픽화하여 NC 데이터를 검증할 수 있도록 하였다. 끝으로 5축 가공의 가공 효율을 최대화하기 본 연구에서는 공동수조 실험용 모형프로펠러의 5축 가공을 위해 Windows NT와 PC 환경하위해 실험을 통하여 최적의 절삭조건을 선정하고 이를 시스템내에 데이터베이스화 함으로써 설계부터 가공까지를 자동으로 수행할 수 있는 시스템으로 구축하였다.

• 한국항해항만학회지
• /
• 제29권7호
• /
• pp.603-609
• /
• 2005

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP( sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verify the validity of the developed program the numerical calculations for Wigley hull and Series 60 Cb=0.6 hull are performed and the results obtained after the numerical calculations are compared with the initial hulls.

• Journal of Computational Design and Engineering
• /
• 제2권4호
• /
• pp.206-217
• /
• 2015

This paper presents a complete S-shape feed rate scheduling approach (CSFA) with confined jerk, acceleration and command feed rate for parametric tool path. For a Non-Uniform Rational B-Spline (NURBS) tool path, the critical points of the tool path where the radius of curvature reaches extreme values are found firstly. Then, the NURBS curve is split into several NURBS sub-curves or blocks by the critical points. A bidirectional scanning strategy with the limitations of chord error, normal/tangential acceleration/jerk and command feed rate is employed to make the feed rate at the junctions between different NURBS blocks continuous. To improve the efficiency of the feed rate scheduling, the NURBS block is classified into three types: short block, medium block and long block. The feed rate profile corresponding to each NURBS block is generated according to the start/end feed rates and the arc length of the block and the limitations of tangential acceleration/jerk. In addition, two compensation strategies are proposed to make the feed rate more continuous and the arc increment more precise. Once the feed rate profile is determined, a second-order Taylor's expansion interpolation method is applied to generate the position commands. Finally, experiments with two free-form NURBS curves are conducted to verify the applicability and accuracy of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2818-2820
• /
• 2001

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.839-841
• /
• 1999

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.145-151
• /
• 1999

An Interactive grid generation program(KGRID) with graphical user interface(GUI) has been improved. KGRID works on the UNLX environment and GUI has been implemented with OSF/Motif and X Toolkit and the graphics language is Open GL for visualization of the 3D objects. It supports more convenient user environment to generate 2D and 3D multi-block structured grid systems. It provides various useful field grid generation methods, which are the algebraic methods, the elliptic partial differential equations method and the predictor-corrector method. It also supports 3D surface grid generation with NURBS(Non-Uniform Rational B-Spline) and various stretching functions to control grid points distribution on curves and surfaces. And some menus are added to perform flexible management, for the objects. We generated surface and field grid system about full aircraft configuration using KGRID. The performance and stability of the KGRID is verified through the generation of the grid system about a complex shape.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2950-2952
• /
• 1999

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) method and OpenGL. The final result image is helpful for the understanding of depth information visually.

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1389-1410
• /
• 2016

This paper proposes a hybrid of topological derivative-based level set method (LSM) and isogeometric analysis (IGA) for structural topology optimization. In topology optimization a significant drawback of the conventional LSM is that it cannot create new holes in the design domain. In this study, the topological derivative approach is used to create new holes in appropriate places of the design domain, and alleviate the strong dependency of the optimal topology on the initial design. Furthermore, the values of the gradient vector in Hamilton-Jacobi equation in the conventional LSM are replaced with a Delta function. In the topology optimization procedure IGA based on Non-Uniform Rational B-Spline (NURBS) functions is utilized to overcome the drawbacks in the conventional finite element method (FEM) based topology optimization approaches. Several numerical examples are provided to confirm the computational efficiency and robustness of the proposed method in comparison with derivative-based LSM and FEM.

• 대한건축학회논문집:구조계
• /
• 제34권6호
• /
• pp.11-18
• /
• 2018

Isogeometric concept is introduced to find out the optimum layout of plane structure under free vibration. Eigenvalue problem is formulated and numerically solved in order to obtain natural frequencies and mode shapes of plane structures. For the exact geometric expression of the structure, the Non-Uniform Rational B-spline Surface (NURBS) basis functions is employed and it is also used to define the material density functions. A node-wise design variables is adopted to deal with the updating of material density in topology optimization (TO). The definition of modal strain energy is employed to achieve the maximization of fundamental frequency through its minimization. The verification of the proposed TO technique is performed by a series of benchmark test for plane structures.