• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.214-214
• /
• 2000

This paper deals with the non contact optical sensor to measure the shape of transparent plates such as glass panel of LCD(Liquid Crystal Display). The conventional methods to obtain the shape or thickness of a transparent plates are contact type sensor such as LVOT(Linear Variable Differential Transformer). Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition, the high temperature glass casting makes the size of sensor body changed. These reasons makes the sensor degraded. In this paper, to overcome these problem, we proposed a low cost noncontact optical sensor this is composed of the Hologram laser unit of a CD-Pickup and a plastic lens. To evaluate the performance of the proposed optical sensor, a series of experiments were performed for various measurement condition. Based upon observation of the experimental result, the developed sensor shows good result for measuring the shape of transparent plates.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.477-482
• /
• 2013

We investigated the detection properties of nitrogen monoxide (NO) gas using transparent p-type $CuAlO_2$ thin film gas sensors. The $CuAlO_2$ film was fabricated on an indium tin oxide (ITO)/glass substrate by pulsed laser deposition (PLD), and then the transparent p-type $CuAlO_2$ active layer was formed by annealing. Structural and optical characterizations revealed that the transparent p-type $CuAlO_2$ layer with a thickness of around 200 nm had a non-crystalline structure, showing a quite flat surface and a high transparency above 65 % in the range of visible light. From the NO gas sensing measurements, it was found that the transparent p-type $CuAlO_2$ thin film gas sensors exhibited the maximum sensitivity to NO gas in dry air at an operating temperature of $180^{\circ}C$. We also found that these $CuAlO_2$ thin film gas sensors showed reversible and reliable electrical resistance-response to NO gas in the operating temperature range. These results indicate that the transparent p-type semiconductor $CuAlO_2$ thin films are very promising for application as sensing materials for gas sensors, in particular, various types of transparent p-n junction gas sensors. Also, these transparent p-type semiconductor $CuAlO_2$ thin films could be combined with an n-type oxide semiconductor to fabricate p-n heterojunction oxide semiconductor gas sensors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.2-53
• /
• 2001

The Non-Contact Optical Sensor using the Hologram Laser for CD Pickup was developed to measure a shape of transparent objects and shown a good performance. Therefore the problems caused by the contact sensor are solved by using the Non-Contact Sensor. The Non-Contact Sensor has to move toward the objects and obtain the Focus Error Signal to measure a position of transparent objects. However, if the distance between the sensor and the object is shorter than the working distance of the objective lens, the sensor will be collided against the objects. In this paper we proposed a new algorithm to estimate the start position of the Focus Error Signal to solve the problems of collision between the sensor and the objects. In addition, we verified that the algorithm is free from the collision in the real time measurement.

• 한국세라믹학회지
• /
• 제41권4호
• /
• pp.277-283
• /
• 2004

Plasma Display Panel(PDP) 상판용 투명유전체의 green sheet를 제조코자 투명유전체 슬러리의 분산특성 및 유기물의 함량과 조성비에 따른 밀도와 기계적 특성을 연구하였다. 비수계 시스템에서 슬러리의 완전분산을 위한 분산제의 종류와 분산제의 양을 결정하기 위해 침강실험, 점도측정을 행하여 최적의 분산조건을 구하였다. 조성물 변수로서 투명유전체조성 분말/(투명유전체조성 분말＋유기물)의 비와 결합제/(결합제＋가소제)의 비를 각각 변화시켜 green sheet를 제조하였다. 제조된 tape casting 슬러리의 대부분은 의가소성(pseudoplastic) 거동을 보이는데, 의가소성 거동은 shear thinning의 효과를 가지는 것으로 기술 할 수 있다. 각각의 조성을 가지는 슬러리는 모두 전단속도가 증가함에 겉보기 점도가 감소하는 shear thinning 효과를 보여 주었다. Green sheet의 특성을 조사한 결과 유기물의 함량 및 조성이 green sheet의 밀도와 기계적 특성을 결정하는 중요한 인자가 되었다.

• Computers and Concrete
• /
• 제25권4호
• /
• pp.327-341
• /
• 2020

Advanced forms of structural design (e.g., displacement-based methods) require knowledge of the non-linear force-displacement behavior of both the overall building and individual lateral load resisting elements, i.e., walls or building cores. Similarly, understanding the non-linear behaviour of the elements in a structure can also allow for a less conservative structural response to be calculated by better understanding the cracked (i.e., effective) properties of the various RC elements. Calculating the non-linear response of an RC section typically involves using 'black box' analysis packages, wherein the user may not be in complete control nor be aware of all the intricate settings and/or decisions behind the scenes. This paper introduces a user-friendly and transparent analysis program for predicting the back-bone force displacement behavior of slender (i.e., flexure controlled) RC walls, building cores or columns. The program has been validated and benchmarked theoretically against both commonly available and widely used analysis packages and experimentally against a database of 16 large-scale RC wall test specimens. The program, which is called WHAM, is written using Microsoft Excel spreadsheets to promote transparency and allow users to further develop or modify to suit individual requirements. The program is available free-of-charge and is intended to be used as an educational tool for structural designers, researchers or students.

• 대한전자공학회논문지TC
• /
• 제44권5호
• /
• pp.40-46
• /
• 2007

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing) 기반의 트랜스패런트(transparent) 이동 다중 홉 릴레이(mobile multi-hop relay; MMR)시스템에서 MS(Mobile Station)가 이동함에 따라 발생하는 도플러 확산(Doppler spread)에 대한 영향을 분석한다. 상호협력(cooperative) MMR 또는 비상호협력(non-cooperative) 수율 증가(throughput enhancement;TE) MMR을 갖는 OFDM 시스템에서 부채널간 간섭(interchannel interference; ICI) 전력과 ICI 전력의 상계(upper bound)를 유도한다. 또한, 신호 대 간섭비(signal-to-interference ratio; SIR)와 SIR의 하계(lower bound)를 유도하고, WiBro(mobile WiMAX)용 파라미터를 이용하여 모의 실험을 통해 유도 결과를 검증한다.??

• 한국해양학회지
• /
• 제28권4호
• /
• pp.313-322
• /
• 1993

한국남서해역은 음향학적 특징에 따라 4개의 음향학적 퇴적상 (acoustic facies) 으로 구분된다. 고해상도 (3.5kHz) 물리탐사기록에 나타난 대표적인 음향학적 특징은 확산된 형(prolonged type), 내부 반사형(internal reflected type), 비투과 형 (non-penetrated type)과 투명한 형(transparent type)이다. 이러한 형(type)들은 해 저면 상황(bottom condition)과 퇴적물의 입도, 굳기(compaction)에 따라 변화한다. 음향학적 퇴적상 I은 확산된 형이 대표적으로 나타난다. 이 형은 불규칙 또는 규칙적 인 해저면 상황과 자갈, 패각편을 함유한 조립질퇴적물에 의해 음파신호가 하부로 흡 수되어 나타난다. 음향학적 퇴적상 II는 내부반사형이 나타난다. 내부반사구조는 퇴적 물의 굳기변화에 의해 발생하는 것으로 추측된다. 음향학적 퇴적상 III은 비투과 형이 나타난다. 이는 분급이 양호한 세립사와 극세립사가 퇴적된 곳에서 음파신호가 투과 하지 못하고 해저면에서 산란되어 나타난다. 음향학적 퇴적상 IV는 일정한 층후에 내 부반사 구조가 없는 투명한 형이 나타난다. 고해상도 물리탐사 기록상에 나타난 음향 학적 형들은 퇴적층서 뿐만 아니라 천해저의 퇴적기작에 대한 중요한 정보를 나타낸 다.

• Journal of Information Processing Systems
• /
• 제13권1호
• /
• pp.95-103
• /
• 2017

The PCI Express is a widely used system bus technology that connects the processor and the peripheral I/O devices. The PCI Express is nowadays regarded as a de facto standard in system area interconnection network. It has good characteristics in terms of high-speed, low power. In addition, PCI Express is becoming popular interconnection network technology as like Gigabit Ethernet, InfiniBand, and Myrinet which are extensively used in high-performance computing. In this paper, we designed and implemented a evaluation platform for interconnect network using PCI Express between two computing nodes. We make use of the non-transparent bridge (NTB) technology of PCI Express in order to isolate between the two subsystems. We constructed a testbed system and evaluated the performance on the testbed.

• Journal of Information Display
• /
• 제9권3호
• /
• pp.8-11
• /
• 2008

A novel non-alkoxide sol-gel process for synthesizing Ga-doped ZnO thin film on glass was derived for possible use as a transparent electrode in flat-panel displays, using zinc acetate dehydrate as the starting material. The structural and electrical properties of thin films have been characterized as functions of Ga addition and post-heat-treatments. Their carrier density, Hall mobility, and optical transmittance were measured and discussed herein to explain the characteristics of the sol-gel-derived Ga-doped ZnO thin film on glass.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.600-602
• /
• 2005

Recently image display devices have become large and high quality. To control the qualities of the component, measurements of the shape and thickness of a plate glass has been required. In order to measure the shape of the specular objects, Non-Contact Optical Sensor using Hologram laser unit was proposed. The sensor has a optical system that is composed of a Hologram laser and objective lens used for CD Player, and the sensor showed high performance for measuring the shape and thickness of transparent plates. In the sensor, the temperature of the sensor body is controlled by TEC(Thermoelectric Cooler). In this paper, we proposed the measuring method to make better performance of sensor using focus error signal of a hologram laser unit. It can measure the shape and the thickness of transparent objects with the s-type focus error signal which is generated by the sensor while it goes to the object.