• Korean Journal of Medicinal Crop Science
• /
• v.21 no.3
• /
• pp.179-183
• /
• 2013

This study was carried out to investigate the variation of growth and yield using different planting densities and vinyl mulching in S. miltiorrhiza cultivation. Top plant growth was observed in the $30{\times}30cm$ planting density of S. miltiorrhiza;, plant height, leaves and branches were larger than in the other treatments. Root length, root diameter, and supporting roots of underground part were increased as planting density was wide, and dry root weight was increased in $30{\times}30cm$. However, yield was highest at 294 kg/10a in the planting density of $30{\times}10cm$. The use of 30-31cm white and black vinyl mulching had no significant effect on the plant height of S. miltiorrhiza, as compared to non-mulching. However, the highest volume of leaves and plant weight was observed in plants using 24.7 black vinyl mulching. Dry underground root weight was highest in black vinyl mulching at 21.7 g compared to 17.0 g for non-mulching. Yield per 10a increased by 28% using black vinyl mulching compared to non-mulching. Based on the results of this study, planting density of $30{\times}10cm$ and black vinyl mulching are the most suitable in the cultivation of S. miltiorrhiza.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.121-126
• /
• 1994

This experiment was carried out in the field to investigate the effects of sowing time, mulching materials and planting density on the growth and root yield of Peucedanum japonicum. The optfimum planting time for yield increase at Kyungbuk area whether the plant was grown under non-mulching or black P. E. mulching condition. Black polyethylene (P. E) film mulching was effective to promote emergence and growth, and dry root yield in the P. E. mulching was 10% higher than that in the non-mulching condition. The yield in the $20{\times}15cm$ planting density was 50% higher than that in the conventional $30{\times}20cm$.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.291-294
• /
• 2011

We studies a model for management of pepper anthracnose based covering method and spraying system in field. 1. Among 82 organic fungicides, 42 materials showed most effective inhibition against mycelia growth of the Colletotrichum acutatum in vitro. 23 formulated biocontrol agents were chosen to control the disease from 42 biocontrol agents in greenhouse. In the end, five kinds (2 plant extracts, 2 biopesiticides, 1 Bordeaux mixture) were selected from 23 materials in the field. 2. The mulching materials of bed covering in fruit season were thin non-woven fabric sheet and black plastic. The use of a fabric sheet was reduced the spread of anthracnose as compared to the plastic covering. 3. The application with the chosen materials was reduced 34% of anthracnose for 7 times sprays to planting 70 days as compared to the untreated control. In yield, nonwoven fabric sheet with formulated biopesticides was increased 17% than black plastic. 4. This result indicated that the developed biocontrol strategy could be an effective and economic crop protection system in organic pepper cultivation field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.220-227
• /
• 2007

Sweetpotato fields in Korea are highly infected with virus and virus like diseases that greatly diminish both yield and quality as indicated by field observations and laboratory tests. In order to solve this problem, there is an urgent need to produce and mass propagate virus-free planting materials for distribution to the farmers. These experiments were conducted, firstly, to determine the most appropriate culture media, nutrient solution, and cutting intervals to maintain growth and vigor of tissue cultured plantleta as mother plants for propagation in insect-proof greenhouse. And as a labor saving method, the production efficiency of plug trays for rapid propagation of stem cuttings as a source of planting materials was likewise evaluated. Results showed that plants grown in medium B supplied with 0.5 and 1.0 strength of MS nutrients had high growth rate, and 20-day cutting interval was the best. 72-plug tray was better than 128-plug. Secondly, it was to develop a technique for the production of first-generation seed roots using hydroponics cultivation system. The yield of virus-free plants propagated in the non-insect proof and open-field cultivation was 2,402 kg/10a, 6% higher than those in the insect-proof cultivation, and the rate of virus re-infection was 18% higher compared to 3.3% with insect-proof cultivation. Lastly, it was to investigate the growth performance of virus free plants in farmers' field. Differences were existed in the yield depending on the variety used, but virus free plants showed an increase of $6{\sim}24%$ over virus infected plants.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.801-810
• /
• 2013

To improve the physical and chemical properties of the soil and increasing water-retaining property of the soil, Superabsorbent synthetic polymeric materials have been used. The experiment carried out from April to July 2012 after the influence evaluation of Superabsorbent synthetic polymeric materials to vines plant. The result shows that the study of Hedera japonica Tobler, the growth and the survival rates rank as media > hydroponic > superabsorbent synthetic polymers, and the growth and the survival rates are considerably pessimistic in the experiment of hydroponic and superabsorbent synthetic polymers. In the study of Trachelospermum asiaticum var. intermedium, the growth and the survival rates rank as hydroponic > media > superabsorbent synthetic polymers, the difference between the experiment of hydroponic and is very small and the survival rates are not very good in the experiment of superabsorbent synthetic polymers. In the study of Euonymus fortunei var. radicans Rehder,it is insignificantly difference among the different of planting based. Judging from these results, the differences are depending on the species of plants. The thesis holds that the characteristics of plant should be considered in plant cultivation and soil improvement in the future, and it is desirable to use the appropriate mixing ratio of soil in soil improvement as well.

• Journal of the Korean Society of Floral Art and Design
• /
• no.43
• /
• pp.123-138
• /
• 2020

This study found Flower Jewelry works in the monthly magazine specializing in flower decoration for nine years from 2011 to 2019. Based on the analysis of the type of expression, method of expression, type and number of plant materials used, and the type and number of non-plant materials used for the flower jewelry found, it was conducted to find out the trend of flower jewelry in Korea. By expression type, a total of 96 works were analyzed as 20.83% for headdresses, 57.29% for necklaces, 5.21% for earrings, 6.25% for lists, and 10.42% for other works(χ²=94.833, p<.001). According to the analysis of the frequency of use of expression techniques, headdresses, necklaces, and lists for each work were produced using five to six different expression techniques and earrings were produced using two to four expression techniques. Material coupling techniques 34.43%, flower and leaf utilization 30.17%, visual techniques 16.63%, collectivization techniques 14.12%, technical highlighting techniques 4.26%, and other 0.39% (χ²=455.222, p<.001). The most frequently used techniques were framing techniques 16.63% and knotting techniques 16.44%. Plant materials used in flower jewelry were found to be 22.61% for Phalaenopsis spp., 13.48% for Gomphrena globosa, 9.57% for Gloriosa rothschildiana, 7.39% for Epidendrum cinnabarinum, 6.96% for Chamelaucium uncinatum and 4.78% for Craspedia globosa (χ²=718.104, p<.001). In the case of branch, the most common was used with 70.00% of the Cornus walteri, and 10.00% of Actinidia arguta, Celastrus orbiculatus, and Salix pseudolasiogyne were used respectively (χ²=10.800, p=.013). In the case of foliage, 24.65% Aspidistra elatior, 24.62% Asparagus asparagoides, 11.54% Senecio rowleyanus, and 6.15% Ceropegia woodii (χ²=269.385, p<.001). In the case of berries, 44.44% of the fruits of the Smilax china, 33.33% of the Hypericum patulum, and 11.11% of the Phytolacca americana were found (χ²=11.444, p =.022). Non-planting materials used in the manufacture of flower jewelry were found to be 47.34% of 2mm aluminium wire, 33.73% of copper wire and 10.06% of 1mm aluminum wire (χ²=186.704, p<.001). The figure was 53.57% for pearls, 12.50% for ribbons, and 4.14% for spangles and feathers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.1
• /
• pp.46-51
• /
• 2004

The film coated snap bean (Phaseolus vulgaris) seeds with five different coating materials treated with 3% increase in seed weight were planted at sandy loam soil controlled moisture content of 18, 19, 20 and 21 %. The oxygen diffusion rate (ODR) was calculated from the different moisture content soil. The number of normal seedlings, seedling vigor, and seedling capability in field (seed vigor x dry matter weight) were observed at 9 days after planting and compared to the changes of ODR. The germination rate and ODR were sharply decreased simultaneously in the seeds planted at 21 % soil moisture content. Seedling emergence did not occur at all as the soil moisture content increased above 22 %. Hence this value should be considered as the threshold of soil moisture content for seedling emergence. An ODR value under 20% did not influence the percent emergence significantly. The certain difference observing in the emergence at the same ODR was not related clearly to the condition of soil. So it can be assumed that the limit of soil moisture content for the emergence of snap bean was approximately 20%. The value of 18% soil moisture content may be considered as the optimum for snap bean emergence. There was close relationship between the mean value of ODR in different soil moisture contents and the emergence. The germination rates of the seeds coated with the different materials were quite different when the seeds were planted at 21 % soil moisture. Dry weight of the seedlings from film coated seeds was decreased slightly, but the germination rates were not much different from the non-treated control under relatively higher soil moisture content (21 %). Major factor lowering emergence rate was oxygen stress while film coating act as a minor constraint for snap bean sown in excess soil moisture condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1302-1308
• /
• 2010

This study the change of the safety factor before and after the reinforcement were compared by performing the parameter research based on the limit equilibrium analysis regarding the same cross section after carrying out the safety factor before the reinforcement on the virtual section in order to observe the change of the safety factor of the slop reinforced with the slope planting reinforced earth, and the variation of the safety factor according to the increase of the length of the reinforcement materials and the change of the slope height was analyzed. As the result, the reinforcement effect was insignificant at no more than 0.6 of L/H, the reinforcement length ratio when the reinforcement length was increased, as the increase of the safety factor was slow comparing with the non-reinforced slope. At 3.0m of the slope height, reinforcement on the slope is not necessary, and at 3.0m to 5.0m of the slope height, the inclination was not influencing at no less than 0.6 of L/H. At 5.0m to 9.0m of the slope height, the safety factor was mostly secured on the slope at 0.8 of L/H and the over-reinforced slope appeared at no less than 1.0 of L/H. Also, the safety factor increased as the slope height increases and the slope gets steeper till 0.8 of L/H, but the slope steepness affects more on the increase of the safety factor than the reinforcement material, as the reinforcing force by the reinforcement material became steady.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.15-26
• /
• 2015

The Daegu Metropolitan Transit Corporation Advisory Committee has chosen 5 styles of bridge-pier designs, including coating, graphic, planting, billboard and safety-facility style, based on the results of landscape simulations from a previous study. This study was conducted to investigate citizen's preferences and emotional images for each style of bridge-pier design, by aiming at the pilot urban landscape improvement section from Daebong Bridge in Suseong Gu to the crossroads near Dongseong Elementary School in Daegu Metropolitan City. The questionnaire was drawn up regarding the urban landscape improvement plans applied to the research area, and the questions were about citizens' perception of bridge-pier structures generated by constructing a light rail transit, important factors to consider when designing bridge piers, preferences for each style of bridge-pier design and emotional impact. 60.4% of the survey participants were found to perceive bridge-pier structures as unattractive, so it was necessary to improve them aesthetically. Regarding visual factors of bridge-pier designs, color was most important at 5.81, followed by form at 5.57. Regarding aesthetic component factors, harmony was most important at 6.07, followed by amenity at 6.00. In the survey participants' preference for each bridge-pier design, the graphic style was preferred most at 4.14, followed by the planting style. In emotional adjectives used for each bridge-pier design, the coating style, the safety-facility style and the non-treatment style showed similar results, and all of these styles were evaluated as artificial, lifeless and desolate. The graphic style and the billboard style showed different tendencies, depending on visual factors and aesthetic component factors applied to the graphic design used for these two bridge-pier styles. Since natural materials were used for the planting style, however, it showed high preference for such emotional images as natural and lively. The emotional adjective 'amiable' was found to affect citizens' preferences for each bridge-pier aesthetic improvement plan most, and it was also analyzed to have an effect on all the styles of bridge-pier designs. To improve the landscape of a light rail transit being constructed inside the urban area, this study quantitatively extracted citizens' preferences and emotional adjective for every style of bridge-pier design applied to the pilot urban landscape improvement section, and it is expected that the results of this study will be used as basic data to improve the landscape of bridge piers.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.337-351
• /
• 2015

The articles, published in the Journal of Korean Forest Society from Volume 1 (1962) to Volume 102 (2013), were investigated for the research trend analysis about forest plants for special purposes, i.e., edible plants, medicinal plants, feed resources, landscape plants, fiber plants, industrial usage, bee plants, bioenergy/phytoremediation uses, dye materials, and rare/endangered/endemic plants. These research articles were classified again based on the contents of research into following categories - habitat environment, ecology, physiology, propagation, silviculture (including planting and tending), genetics and breeding, identification, pest and disease control, animal-related research, components analysis and extracts, vegetation survey, biotechnology, management, recreation and forest healing, and research review. Among the total 2,433 articles published, 611 (25.1%) were related to plants for special usage or purposes. The highest frequency (14.9%) in publications was found in the field of silviculture followed by physiology, propagation, identification, and genetics and breeding, respectively. On the bases of usage, edible plants showed higher frequency (26.5%) than others, followed by industrial purpose, bioenergy/phytoremediation usage, landscape plants, medicinal plants, and rare/endangered/endemic plants. Populus plant species was the most popular in research, showing 62 articles; and Castanea crenata 36; Pinus koraiensis 35; Robinia pseudoacacia 20; Ginko biloba 17, etc. Based on the survey and analysis, the following points are suggested: 1) improved evaluation of forest plants as non-wood resources, 2) expanding research topics on the basis of production, management, and utilization of non-wood forest resources, 3) management of database of forest plant information and encouragement needed to strengthen cooperative researches satisfying the needs of other industrial and scientific areas, and 4) encouraging to promote traditional knowledge based research on forest plants.