• KIEAE Journal
• /
• v.10 no.3
• /
• pp.11-16
• /
• 2010

This paper has attempted to investigate the change in soil moisture volume and temperature of architecture by planting ground(soil thickness and soil mixture ratio) and ground cover plants(Sedum sarmentosum, Zoysia japonica, Chrysanthemum zawadskii) for middle region green roof system. For this, a test was conducted on the roof of Konkuk University building from April 2009 to October 2009. In terms of treatment, five types(SL, $P_7P_1L_2$, $P_6P_2L_2$, $P_5P_3L_2$, $P_4P_4L_2$) depending on soil mixture ratio and two types(15cm, 25cm) by soil depth were created. Results of soil moisture volume by soil mixture ratio in the 15cm soil thickness showed that the difference was significance between simple soil and mixture soil treatment, however, the statistical significance was not recognized according to soil mixture ratio. In case of 25cm soil thickness, soil moisture volume by soil mixture ratio was more higher 7Vol.%~10Vol.% in the mixture soil than simple soil treatment. In terms of districts planted ground cover plants, soil volume moisture differed among plants in the order Zoysia japonica 17.74 Vol.%$34.86^{\circ}C$, district non-planted $27.49^{\circ}C$, Sedum sarmentosum $25.11^{\circ}C$, Chrysanthemum zawadskii $23.08^{\circ}C$, Zoysia japonica $24.45^{\circ}C$ respectively So, concrete surface showed more higher $5^{\circ}C{\sim}15^{\circ}C$ than other things among the all the time. Result of inner temperature of the architecture and soil, it was measured inner of architecture $25.69^{\circ}C$, inner district non-planted $24.29^{\circ}C$, Chrysanthemum zawadskii $23.90^{\circ}C$, Zoysia japonica $24.02^{\circ}C$, Sedum sarmentosum $25.13^{\circ}C$, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3480-3500
• /
• 2017

Accurate locating for the mobile target remains a challenge in various applications of wireless sensor networks (WSNs). Unfortunately, most of the typical localization algorithms perform well only in the WSN with densely distributed sensor nodes. The non-localizable problem is prone to happening when a target moves into the WSN with sparsely distributed sensor nodes. To solve this problem, we propose a collaborative and predictive localization algorithm (CPLA). The Gaussian mixture model (GMM) is introduced to predict the posterior trajectory for a mobile target by training its prior trajectory. In addition, the collaborative and predictive schemes are designed to solve the non-localizable problems in the two-anchor nodes locating, one-anchor node locating and non-anchor node locating situations. Simulation results prove that the CPLA exhibits higher localization accuracy than other tested predictive localization algorithms either in the WSN with sparsely distributed sensor nodes or in the WSN with densely distributed sensor nodes.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.252-255
• /
• 2011

Supercavitating torpedo uses the supercavitation technology that can reduce dramatically the skin friction drag. The present work focuses on the numerical analysis of the non-condensable cavitating flow around the supercavitating torpedo. The governing equations are the Navier-Stokes equations based on the homogeneous mixture model. The cavitation model uses a new cavitation model which was developed by Merkle(2006). The multiphase flow solver uses an implicit preconditioning scheme in curvilinear coordinates. The ventilated cavitation is implemented by non-condensable gas injection on backward of cavitator cone and the base of the torpedo. The comparison between the without and with ventilated cavitation numerical results, with ventilated cavitation using non-condensable gas injection is more efficient method.

• The Korean Journal of Applied Statistics
• /
• v.25 no.5
• /
• pp.803-811
• /
• 2012

For credit evaluation models, we extend the study of discriminatory power based on AUC obtained from a ROC curve when the number of defaults is small and distribution functions of the defaults and non-defaults are normal distributions. Since distribution functions do not satisfy normality in real world, the distribution functions of the defaults and non-defaults are assumed as normal mixture distributions based on results that the normal mixture could be better fitted than other distribution estimation methods for non-normal data. By using several AUC statistics, the discriminatory power under such a circumstance is explored and compared with those of normal distributions.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.168-174
• /
• 2014

It was conducted to evaluate the control efficacy of Bordeaux mixture on pepper anthracnose in vitro and in vivo. The suppressive efficacy of Bordeaux mixture on mycelial growth and spore germination of Colletotrichum acutatum was investigated on PDA, cellophane membranes and pepper fruits, respectively. Furthermore, its control value was evaluated on detached pepper fruits inoculated with C. acutatum by wound and non-wound inoculation method, and in fields. The mycelial growth of C. acutatum JC24 was inhibited by 90.0% on PDA amended with $937{\mu}g\;mL^{-1}$ of Bordeaux mixture. While the spore germination of C. acutatum JC24 was inhibited perfectly on cellophane membranes treated at $187{\mu}g\;mL^{-1}$ of Bordeaux mixture, that on fruits inoculated with the pathogen by wound inoculation and non-wound inoculation method was inhibited by 88.1% and 91.3%, respectively. Although the control value on fruits treated with $937{\mu}g\;mL^{-1}$ of Bordeaux mixture was 17.6% in wound inoculation method, it was 58.8% in non-wound inoculation method. In fields, when Bordeaux mixture was sprayed five times at 14 day-intervals, it showed 55.7% and 61.7% of control value in 2012 and 2013, respectively. We think Bordeaux mixture was able to use as an eco-friendly organic farming material to control pepper anthracnose based on the above-mentioned results.

• Health Policy and Management
• /
• v.12 no.2
• /
• pp.1-22
• /
• 2002

Since the early 1980s scholars have applied latent structure and other type of finite mixture models from various academic fields. Although the merits of finite mixture model are well documented, the attempt to apply the mixture model to medical service has been relatively rare. The researchers aim to try to fill this gap by introducing finite mixture model and segmenting inpatients DB from one general hospital. In section 2 finite mixture models are compared with clustering, chi-square analysis, and discriminant analysis based on Wedel and Kamakura(2000)'s segmentation methodology schemata. The mixture model shows the optimal segments number and fuzzy classification for each observation by EM(expectation-maximization algorism). The finite mixture model is to unfix the sample, to Identify the groups, and to estimate the parameters of the density function underlying the observed data within each group. In section 3 and 4 we illustrate results of segmenting 4510 patients data including menial and ratio scales. And then, we show AHP can be identify the attractiveness of each segment, in which the decision maker can select the best target segment.

• Biomolecules & Therapeutics
• /
• v.13 no.3
• /
• pp.181-184
• /
• 2005

The solution-phase combinatorial synthesis of iminodiacetic acid triamide libraries linked to 1-(4-chlorobenzhydryl)piperazine has been reported. Ten mixture libraries, each containing 5 components, were synthesized in 4 steps from N-BOC-iminodiacetic acid anhydride. Antibradykinin effects of the mixture and individual libraries were compared using guinea-pig ileum smooth muscle. The changes in the inhibition were also observed by testing the combination of two different compounds from the same library. We found out the correlation between the inhibition of mixtures and that of individual libraries. It is possible to choose the mixtures with relatively high inhibitory effects to find out the most effective individual compound for further synthesis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1237-1240
• /
• 2005

The effects of various sustain waveforms on the discharge characteristics, such as discharge current waveform, IR waveform, luminance, luminous efficiency, power consumption, and static margin are investigated under high Xe (20%) gas mixture at 200 kHz. The four types of sustain waveforms, such as non-overlapped sustain waveform without auxiliary pulse, non-overlapped sustain waveform with auxiliary pulse, overlapped sustain waveform without auxiliary pulse, overlapped sustain waveform with auxiliary pulse, are examined intensively. As a result, the overlapped sustain waveform with auxiliary pulse shows the best discharge characteristics under high Xe (20%) gas mixture at 200 kHz.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.759-764
• /
• 2005

In this paper, numerical analysis of hydrogen recycle system has been conducted in order to enhance the efficiency of automotive fuel cell. Generally, the excess hydrogen is provided in the automotive fuel cell. Since the non-reaction hydrogen reduces automotive fuel cell efficiency, reuse of the non-reaction hydrogen can be helpful to improve the fuel cell performance. In case of PEM FC, the water vapor is provided to hydrogen from the cathode so that the mixture experiences phase change depending on the changes of pressure and temperature. The internal flow of the mixture in the hydrogen recirculation system of fuel cell was investigated for real flow conditions. The variation of performance, properties and mass fractions of mixture, hydrogen and water-vapor were investigated. This study was performed based on 80KW level automotive fuel cell's recycling system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.183-191
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used mixture which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.