• Journal of applied mathematics & informatics
• /
• 제42권4호
• /
• pp.899-913
• /
• 2024

In this article, the Series Solution Method (SSM) is employed to solve the linear or non-linear Volterra integro-differential equations. Numerous examples have been presented to explain the numerical results, which is the comparison between the exact solution and the numerical solution, and it is found through the tables. The amount of error between the exact solution and the numerical solution is very small and almost nonexistent, and it is also illustrated through the graph how the exact solution completely applies to the numerical solution. This proves the accuracy of the method, which is the Series Solution Method (SSM) for solving the linear or non-linear Volterra integro-differential equations using Mathematica. Furthermore, this approach yields numerical results with remarkable accuracy, speed, and ease of use.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.167-178
• /
• 2018

A roller compacted concrete (RCC) dam should be analyzed under seismic ground motions for different conditions such as empty reservoir and full reservoir conditions. This study presents three-dimensional earthquake response and performance of a RCC dam considering materially non-linearity. For this purpose, Cine RCC dam constructed in Aydın, Turkey, is selected in applications. The three-dimensional finite element model of Cine RCC dam is obtained using ANSYS software. The Drucker-Prager material model is considered in the materially nonlinear time history analyses for concrete and foundation rock. Furthermore, hydrodynamic effect was investigated in linear and non-linear dynamic analyses. Researchers observe that how the tensile and compressive stresses change by hydrodynamic pressure effect. The hydrodynamic pressure of the reservoir water is modeled with the fluid finite elements based on the Lagrangian approach. In this study, dam body and foundation are modeled with welded contact. The displacements and principle stress components obtained from the linear and non-linear analyses with and without reservoir water are compared each other. Principle stresses during earthquake were obtained at the most critical point in the upstream face of dam body. Besides, the change of displacements and stresses by crest length were investigated. Moreover demand-capacity ratio criteria were also studied under linear dynamic and nonlinear analysis. Earthquake performance analyses were carried out for different cases and evaluated. According to linear and nonlinear analysis, hydrodynamic water effect is obvious in full reservoir situation. On the other hand, higher tensile stresses were observed in linear analyses and then non-linear analyses were performed and compared with each other.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권4호
• /
• pp.439-447
• /
• 1996

Monthly test day production for 12,020 records, were collected from six of the largest specialized dairy farms located in central region of the Kingdom of Saudi Arabia. The records described lactating cows in four parities and two seasons of calving. Monthly test day records were fitted using Wood's model $At{{^b}{_e}}^{-ct}$ with multiple and additive error term. Linear and non-linear regression models were used to find the estimates of the parameters necessary to draw the lactation curves. The shape of the lactation curves of different parities showed that third lactation has the heighest peak (43.08 kg) for linear regression model and (42.08 kg) for non-linear regression model. Fourth lactation has the lowest peak (24.00kg) for linear regression model and (25.64 kg) for non-linear regression models. Cows of second and third lactations reached the peak at 58 day for both linear and non-linear regression models. Cows of first lactation were more persistent and had late peak at 68 and 67 days for both models respectively. While, third lactation cows were lower persistent and had early peak at 58 day for both models. Cows calved at winter months have higher starting values (A), higher ascending slope (b) and higher decending slope (c). Least square means of milk yield of the first four parities and for overall data were 6,653, 7,659, 7,482, 6,988 and 7,614 kg respectively. The corresponding lactation period were 358, 367, 350, 363 and 364 days respectively.

• Composites Research
• /
• 제18권2호
• /
• pp.30-37
• /
• 2005

본 논문에서는 평직구조를 갖는 성층권 비행선 기낭의 하중막재에 대한 비선형 유한요소 해석 결과를 기술하였다. 평직구조를 갖는 하중막재의 미세구조를 3차원적으로 구현하였고, Updated Lagrangian 방법을 사용하여 기하학적 비선형성을 고려하였다 계산결과, 큰 변형률에서 비선형해석으로부터 얻은 응력-변형률 곡선은 선형해석의 결과와 큰 차이를 보였다. 또한 응력-변형률 곡선으로부터 얻은 비선형 탄성계수 값은 선형 탄성계수보다 큰 값을 보였는데 그 차이는 섬유의 굴곡도가 작은 경우 더욱 두드러지게 나타났다

• Steel and Composite Structures
• /
• 제6권5호
• /
• pp.401-415
• /
• 2006

Based on a non-linear model taking into account flexural-torsional couplings, analytical solutions are derived for lateral buckling of simply supported I beams under some representative load cases. A closed form is established for lateral buckling moments. It accounts for bending distribution, load height application and pre-buckling deflections. Coefficients $C_1$ and $C_2$ affected to these parameters are then derived. Regard to well known linear stability solutions, these coefficients are not constant but depend on another coefficient $k_1$ that represents the pre-buckling deflection effects. In numerical simulations, shell elements are used in mesh process. The buckling loads are achieved from solutions of eigenvalue problem and by bifurcations observed on non linear equilibrium paths. It is proved that both the buckling loads derived from linear stability and eigenvalue problem lead to poor results, especially for I sections with large flanges for which the behaviour is predominated by pre-buckling deflection and the coefficient $k_1$ is large. The proposed solutions are in good agreement with numerical bifurcations observed on non linear equilibrium paths.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.229-233
• /
• 2009

This paper proposes a correction method for the error inherently created by time-step approximation in finite element analysis (FEA). For a simple RL and RLC linear circuit, the error in time-step analysis is analytically investigated, and a correction method is proposed for a non-linear system as well as a linear one. Then, for a practical inductor model, linear and non-linear time-step analyses are performed and the calculation results are corrected by the proposed methods. The accuracy of the corrected results is confirmed by comparing the electric input and output powers.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.73-80
• /
• 2024

Non-uniform reinforced concrete brace facade systems are newly considered to improve seismic performance of reinforced concrete frame buildings under lateral load. For normal and high strength concrete of 30MPa, 80MPa, and 120MPa, the cross-sections of reinforced concrete brace facade systems were designed as different size with same amount of reinforcements. The strengthened frame systems were analyzed by a non-linear two-dimensional finite element technique which was considering material non-linearities of concrete and reinforcing bars under monotonic and cyclic loadings. From the study of non-linear analysis of the systems, therefore, it was provided that the proposed braced facade systems were reliable to improve laterally load-carrying capacity and minimize damages of concrete members through comparisons of load-displacement curves, crack patterns, and stress distributions of reinforcing bars predicted by current non-linear finite element analysis of frame specimens.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.141-149
• /
• 2017

In this study, vibration analysis of fluid conveying microbeams under non-ideal boundary conditions (BCs) is performed. The objective of the present paper is to describe the effects of non-ideal BCs on linear vibrations of fluid conveying microbeams. Non-ideal BCs are modeled as a linear combination of ideal clamped and ideal simply supported boundary conditions by using the weighting factor (k). Non-ideal clamped and non-ideal simply supported beams are both considered to show the effects of BCs. Equations of motion of the beam under the effect of moving fluid are obtained by using Hamilton principle. Method of multiple scales which is one of the perturbation techniques is applied to the governing linear equation of motion. Approximate solutions of the linear equation are obtained and the effects of system parameters and non-ideal BCs on natural frequencies are presented. Results indicate that, natural frequencies of fluid conveying microbeam changed significantly by varying the weighting factor k. This change is more remarkable for clamped microbeams rather than simply supported ones.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.263-271
• /
• 2017

A theoretical study was carried-out of mode II delamination fracture behavior of the End Loaded Split (ELS) functionally graded beam configuration with considering the material non-linearity. The mechanical response of ELS was modeled analytically by using a power-law stress-strain relation. It was assumed that the material is functionally graded transversally to the beam. The non-linear fracture was investigated by using the J-integral approach. Equations were derived for the crack arm curvature and zero axes coordinate that are needed for the J-integral solution. The analysis developed is valid for a delamination crack located arbitrary along the beam height. The J-integral solution was verified by analyzing the strain energy release rate with considering material non-linearity. The effects of material gradient, non-linear material behavior and crack location on the fracture were evaluated. The solution derived is suitable for parametric analyses of non-linear fracture. The results obtained can be used for optimization of functionally graded beams with respect to their mode II fracture performance. Also, such simplified analytical models contribute for the understanding of delamination fracture in functionally graded beams exhibiting material non-linearity.

• Structural Engineering and Mechanics
• /
• 제10권2호
• /
• pp.181-195
• /
• 2000

A two-step procedure for the application of non linear constrained programming to the limit analysis of rigid brick-block systems with no-tension and frictional interface is implemented and applied to various masonry structures. In the first step, a linear problem of programming, obtained by applying the upper bound theorem of limit analysis to systems of blocks interacting through no-tension and dilatant interfaces, is solved. The solution of this linear program is then employed as initial guess for a non linear and non convex problem of programming, obtained applying both the 'mechanism' and the 'equilibrium' approaches to the same block system with no-tension and frictional interfaces. The optimiser used is based on the sequential quadratic programming. The gradients of the constraints required are provided directly in symbolic form. In this way the program easily converges to the optimal solution even for systems with many degrees of freedom. Various numerical analyses showed that the procedure allows a reliable investigation of the ultimate behaviour of jointed structures, such as stone masonry structures, under statical load conditions.