• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.211-216
• /
• 2011

According to the result of the first report and the second report of this study, it was expected that soil heating in a protected cultivation in winter season would affect the initial growth and development of fruit. Based on the result of previous study, we compared height, leaf number, leaf area, fruit weight, crop growth rate (CGR), features and quantity of cucumber for 3 months after planting between the soil heating group and the non-heating group. The result were summarized as follows: The height, leaf number, leaf area and fruit weight of cucumber in the soil heating group were 12.5%, 14.6%, 21.4% and 22.8% higher, respectively, compared to those of cucumber in the non-heating group. Although both the soil heating group and the non-heating group similarly showed an increasing pattern in CGR after transplanting, the soil heating group showed the increased CGR by 12.1% compared to that of the non-heating group. The quantity of cucumber in the soil heating group was about 26% higher than that of the non-heating group. It is assumed that the activation of initial growth and development of fruit in the heating group resulted in the increase of quantity.

• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.605-613
• /
• 2006

Discharge characteristics of non-point source pollutant and load amount of the discharge in the urban area were investigated in the Pungyeongjeong-stream basin and the Yongbong-stream basin in this present study. The land use of the studied basins were divided into paddy field, industrial complex area, combined sewage system, separate sewer system and point sources discharge. The descriptive statistics on the event mean concentrations (EMCs) of non-point pollutants by the the land use showed in the range of 4.43-32.28 mg/L for BOD and 8.27~56.17 mg/L for COD. The highest concentration was shown from the combined sewage system. The EMC of SS at the paddy field in the Pungyeongjeong-stream basin showed the highest range with the values ~ from 35.76 to 358.86 mg/L, which might have been influenced by a levee construction in the adjacent of the area. The relatively high concentration values of 4.43~32.28 mg/L and 1.617.13 mg/L emerged from TN and TP,respectively, at the discharge points of the both stream basins.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.256-262
• /
• 2010

This paper discussed the following. 1. After reaching the final phase of an oil-based society, a resource-saving and -recycling "Methane Energy-based Society" will come about because of limited natural resources. 2. Industrial Infrastructure Technologies which support the Methane Energy-based Society will cause a paradigm shift in the area of industrial, transportation and civilian sectors. 3. The Non-communication application technology of microwaves plays an important role as one of the core element technologies which comprise new industrial infrastructure technologies.

• Journal of Environmental Science International
• /
• v.16 no.3
• /
• pp.299-310
• /
• 2007

It will be necessary to make proper management plans to preserve the air quality in good level for the public. In order to make these plans, source information and detail emission inventories of the city and near industrial areas should be given. However, lack of the source measurements data makes us more difficult to complete the source inventory. VOC source Inventory could be utilized for the feasibility study to estimate the contribution of VOC sources presenting to the receptor such as residential area. It may give policy maker an idea how to control the air quality, and improve their social environment in the area. This study shows data that measured VOCs concentrations from the local industrial areas in Jeonju during from May 2005 to January 2006. The samples were collected from the near sources in 7 major factories in the industrial park as well as 5 general sources in near city Jeonju area to elucidate the abundances of speciated VOCs and their spacial and temporal distributions depending on source bases. Industrial sources are as follows; chemical, food, paper, wood, metal, non-metal (glass), and painting (coating) industries. The 5 general sources are sampled from tunnel, gasoline gas station, dry cleaning shop, printing (copy) shop, and road pavement working place in urban area. To understand the near source effect at receptor, samples from the 2 receptor sites (one is at center of the industrial complex and the other site is at distance residential area downwind from the center) were collected and analyzed for the comparison to source concentration. The mass contributions of the speciated VOC to total mass of VOCs measured from the different sources and ambient (2 receptors) were presented and discussed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.3
• /
• pp.587-596
• /
• 2014

The study aims at suggesting the direction of industrial utilization for harmful jellyfish which appears in large quantities in the Korean coastal areas. If the technology of industrial utilization for the jellyfish is developed, it will be possible to grow the industry to the export industry due to the mass appearance of jellyfish in Korean coastal areas. The industrial utilization of jellyfish should follow the direction of minimizing the damage by the jellyfish blooms and maximizing the resource recycling of the jellyfish. Therefore, Korea needs construction of infrastructure for the industrialization and promotion of R&D in order to activate the industrial utilization. Finally, the study suggested issues and tasks for promoting the industrial utilization of jellyfish as follows. First, Korea should stabilize the high quality raw material supply system. Second, mass processing technology should be developed for the industrial utilization of the jellyfish. Third, research and manual development should follow for the preparation of turning the jellyfish to the food. Fourth, extraction technology of useful non-food substance such as extracting collagen from jellyfish should be developed and accelerate the industrial utilization of non-food area.

• Journal of the Korean earth science society
• /
• v.27 no.2
• /
• pp.209-220
• /
• 2006

In this study, the distribution patterns of major odorous compounds in ambient air were investigated in the areas surrounding the Ban-Wall industrial complex of Ansan, Korea (Aug. 2004 to Sep. 2005). The results indicated the environmental significance of several major odorous compounds which include carbonyl compounds, reduced sulfur compounds (RSC), and volatile organic compounds (VOC). When the results were compared on a diurnal basis, the afternoon time concentration of most odorous compounds were notably higher than their morning time counterparts. It also indicated that the odor concentrations differed greatly, in terms of spatial grouping scheme of data sets, such as between industrial area and non-industrial area. The comparison of spatial patterns indicated that the concentrations of most of the compounds at the industrial area were maintained at high concentration levels, compared to the surrounding areas. The overall results of this study thus suggest that the distribution of odorous compounds in a large industrial complex can exhibit a unique pattern of their own.

• Journal of Environmental Health Sciences
• /
• v.38 no.5
• /
• pp.398-406
• /
• 2012

Objectives: In order to investigate the relation between environmental pollution and its effect on human health in large-scale industrial complex regions, monitoring studies have been conducted since 2003. The main purpose of this Gangneung study is to produce background data which can be compared with several large-scale industrial complex regions such as Ulsan, Sihwa, Banwol, Gwangyang, Yeosu, Pohang and Cheongju Daesan industrial complexes. Methods: In this Gangneung study, 1,007 local residents were recruited and the framework of this study was designed to evaluate and monitor health effects associated with low-level but long-term exposure to environmental pollutants. A survey was performed based on personal questionnaires, medical check-ups, and allergy skin prick tests for twelve common allergens. The authors reviewed the prevalence rate of skin allergens in Gangneung compared with in large-scale industrial areas. The results are summarized as follows. Results: The diagnosis prevalence and medical treatment prevalence of asthma were lower than in industrial complex regions, but allergic rhinitis was higher. The allergy skin test prevalence was 26.0% and the most common allergens were dust mites (D. pteronysinus 16.7% and D. farinae 16.3%). Conclusions: The positive findings of the skin prick test were similar with large-scale industrial complex regions in Korea. Further study is required to find the cause of the regional differences in skin prick prevalence.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.66
• /
• pp.37-45
• /
• 2001

Because the structure of the economy is being changed from product-oriented and company-centered economy to service-oriented and customer-centered economy, and the market competition is varying with the competition of non-price factors, the importance for customer service of logistics system is being increased. Thus, the level of customer service should be represented as an element of the logistics decision and the facility location decision. The level of customer service provided by logistics system has an effect on customers\` purchase decisions, hence on the market demand. That is, the market demand is elastic for customer service as it is influenced by product price. Considering the effect of customer service on demand, this study develops the market area which each facility will serve. That area is circular, and distance norm is considered Euclidean and Rectilinear (or Manhattan) distance norm. The market demand for product at a particular area is affected by the level of customer service that facility provides, and the relationship between the market demand and the level of customer service is represented with a mathematical function.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.1
• /
• pp.69-88
• /
• 2001

In the zigzag milling operation, an important issue is to design a machining strategy which minimizes the cutting time. An important variable for minimization of cutting time is the tool path length. The tool path is divided into cutting path and non-cutting path. Cutting path can be subdivided into tool path segment and step-over, and non-cutting path can be regarded as the tool retraction. We propose a new method to determine the cutting direction which minimizes the length of tool path in a convex or concave polygonal shape including islands. For the minimization of tool path length, we consider two factors such as step-over and tool retraction. Step-over is defined as the tool path length which is parallel to the boundary edges for machining area and the tool retraction is a non-cutting path for machining any remaining regions. In the determination of cutting direction, we propose a mathematical model and an algorithm which minimizes tool retraction length in complex shapes. With the proposed methods, we can generate a tool path for the minimization of cutting time in a convex or concave polygonal shapes including islands.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.1
• /
• pp.41-59
• /
• 2022

Does the industrial complex of Korea leading the growth in manufacturing industry play the role of intensifying agglomeration effects? To answer this question, this study empirically analyzes the moderating effects of industrial complex on the relation between agglomeration externalities and regional productivity, which has not been covered by previous researches. To do so, analysis of panel data has been conducted using the regional level data for the period of 2010 to 2019. Empirical results are provided at different levels including the whole country, capital region and non-capital region. As a result, it was found that in non-capital region, environments to strengthen positive agglomeration externalities stemming from specialization and diversity in manufacturing through industrial complex whithin the region are built up. However, moderating effects of industrial complex is quite limited in capital region. This implies that the role of industrial complex needs to be importantly reconsidered in the perspective of maximization of agglomeration effects in manufacturing, revitalization of non-capital area and manufacturing innovation.