• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.222-227
• /
• 2016

In this paper, the optimized design for bow structure was investigated by using EDISON software. Considering the mechanism of the bow, non-linear FEM analysis was essential. The factors of the design are height, width, number of holes and taper value. High performance of the internal energy and lowest mass were main issues. The limit of the von-mises stress was yield strength for the material. Material was chosen by considering typical bow material, Aluminum. Using Taguchi method($L_9$), 9 models were selected and contribution rate was calculated for each factors. Following the contribution rate, 3 factors were fixed and optimized model was predicted. After making optimized model for FEM analysis, the value of internal-energy, mass for FEM model were compared with predicted value, calculated the percentage error and figure out the reliability of Taguchi method.

• Geomechanics and Engineering
• /
• v.13 no.5
• /
• pp.743-756
• /
• 2017

Laboratory investigation reveals that rockfills exhibit significant stress-path-dependent behavior during shearing, therefore realistic prediction of deformation of rockfill structures requires suitable constitutive models to properly reproduce such behavior. This paper evaluates the capability of a strain hardening model proposed by the authors, by comparing simulation results with large-scale triaxial stress-path test results. Despite of its simplicity, the model can simulate essential aspects of the shear behavior of rockfills, including the non-linear stress-strain relationship, the stress-dependence of the stiffness, the non-linear strength behavior, and the shearing contraction and dilatancy. More importantly, the model is shown to predict the markedly different stress-strain and volumetric behavior along various loading paths with fair accuracy. All parameters required for the model can be derived entirely from the results of conventional large triaxial tests with constant confining pressures.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.88-93
• /
• 1996

The initial condition should be consistent with real reactor core state for the simulation of the core transient. The initial xenon distribution, which cad not be measured in the core, has a significant effect on the transient with xenon dynamics of PWR. In the simulation of the transient stating from non-equilibrium xenon state, the accurate initialization of the non-equilibrium xenon distribution is essential to predict the core transient behavior. In this study, the xenon initialization method to predict the core transient more accurately was developed through the first-order perturbation theory of the relationship between simulated power and measured power distribution and verified by the application of the simulation for a startup test of Yonggwang Unit 3.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.2
• /
• pp.77-82
• /
• 2019

It is well known that trigeminal nerve injury causes hyperexcitability in trigeminal ganglion neurons, which become sensitized. Long after trigeminal nerve damage, trigeminal spinal subnucleus caudalis and upper cervical spinal cord (C1/C2) nociceptive neurons become hyperactive and are sensitized, resulting in persistent orofacial pain. Communication between neurons and non-neuronal cells is believed to be involved in these mechanisms. In this article, the authors highlight several lines of evidence that neuron-glial cell and neuron macrophage communication have essential roles in persistent orofacial pain mechanisms associated with trigeminal nerve injury and/or orofacial inflammation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.455-458
• /
• 2010

Extracting the brain from magnetic resonance imaging head scans is an essential preprocessing step of which the accuracy greatly affects subsequent image analysis. The currently popular Brain Extraction Tool produces a brain mask which may be too smooth for practical use to reduce the accuracy. This paper presents a novel and indirect brain extraction method based on non-brain tissue segmentation. Based on ITK, the proposed method allows a non-brain contour by using region growing to match with the original image naturally and extract the brain tissue. Experiments on two set of MRI data and 2D brain image in horizontal plane and 3D brain model indicate successful extraction of brain tissue from a head.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.21-31
• /
• 2018

Recently, there is an increasing number of universities in which SW education is operated as a liberal arts education regardless of major. In this paper, the survey is conducted to analysis the factors affecting the non-majors students' perception of the necessity of SW education through a case study of SW liberal arts by gender, college, and SW learning experience. As a result, men, students of social science college, and students with SW learning experience strongly agreed that SW education for non-majors is essential. 'SW education is very helpful in studying my major' was analyzed as a necessary condition of SW education for non-majors. Especially, the difficulty of SW learning did not affect the recognition of the necessity of non-majors SW education. If the SW liberal education is based on the SW technology that helps their major, it will be expected that the improved learning motivation due to majors-relevance will deepen a consensus on SW education.

• Geomechanics and Engineering
• /
• v.13 no.4
• /
• pp.535-570
• /
• 2017

There are only few cases where cause and location of failure of a rock structure are limited to a single discontinuity. Usually several discontinuities of limited size interact and eventually form a combined shear plane where failure takes place. So, besides the discontinuities, the regions between adjacent discontinuities, which consist of strong rock and are called material or rock bridges, are of utmost importance for the shear strength of the compound failure plane. Shear behaviour of persistent and non-persistent joint are different from each other. Shear strength of rock mass containing non-persistent joints is highly affected by mechanical behavior and geometrical configuration of non-persistent joints located in a rock mass. Therefore investigation is essential to study the fundamental failures occurring in a rock bridge, for assessing anticipated and actual performances of the structures built on or in rock masses. The purpose of this review paper is to present techniques, progresses and the likely future development directions in experimental testing of non-persistent joint failure behaviour. Experimental results showed that the presence of rock bridges in not fully persistent natural discontinuity sets is a significant factor affecting the stability of rock structures. Compared with intact rocks, jointed rock masses are usually weaker, more deformable and highly anisotropic, depending upon the mechanical properties of each joint and the explicit joint positions. The joint spacing, joint persistency, number of rock joint, angle of rock joint, length of rock bridge, angle of rock bridge, normal load, scale effect and material mixture have important effect on the failure mechanism of a rock bridge.

• YAKHAK HOEJI
• /
• v.41 no.3
• /
• pp.370-380
• /
• 1997

The role of nitric oxide (NO) on the non-adrenergic non-cholinergic (NANC) relaxations induced by the short and prolonged electrical field stimulation (EFS) has been studied in the rabbit corpus cavernosum. In the presence of atropine and guanethidine the prolonged EFS (2-16 Hz) of corpus cavernosal strips precontracted with phenylephrine produced frequency-dependent relaxations, which were abolished by tetrodotoxin as shown in the relaxations induced gy the short EFS, indicating that their orgin is NANC nerve stimulation. $N^G$-nitro-L-arginine (L-NNA), inhibitor of nitirc oxide synthase, caused a concentration-dependent inhibition to the NANC relaxation, and at 100 M L-NNA the relaxation were virtually abolished. The inhibitory effect of L-NNA was reversed by L-arginine. Hemoglobin abolished the relaxations to NO and also caused a concentration-dependent inhibition of the NANC relaxation. The hemoglobin-resistant relaxation induced by EFS was eliminated by L-NNA. Methylene blue significantly reduced the NANC relaxation in a conentration-dependent manner. The NANC relaxation was not affected by a VIP-inactivating pepridase, alpha0chymotrypsin, whereas VIP-induced relaxation was completely abolished. NO- and VIP-induced relaxation were not affected by L-NNA. These results indicate that the NANC relaxation induced by prolonged EFS of the rabbit corpus cavernosum is mediated by NO-guanosine 3',5'-cyclic monophosphate pathway as shown in the relaxation induced by the short EFS, and that VIP release is not essential for the NANC relaxation of the rabbit corpus cavernosum and VIP is not involved the generation fo NO.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.505-512
• /
• 1988

Since the propagation of a short fatigue crack is directly related to the large crack which causes the fracture of bulk specimen, the detailed study on the propagation of the short crack is essential to prevent the fatigue fracture. However, a number of recent studies have demonstrated that the short crack can grow at a low applied stress level which are predicted from the threshold condition of large crack. In present study, the threshold condition for the propagation of short fatigue crack is examined with respect to the microstructure and cyclic loading history. Specimens employed in this study were decarburized eutectoid steels which have various decarburized ferrite volume fraction. Rotating bending fatigue test was carried out on these specimens with the special emphasis on the '||'&'||'quot;critical non-propagating crack length.'||'&'||'quot; It is found that the reduction of the endurance limit of their particular microstructures can be due to the increase of the length of critical non-propagating crack, and the quantitative relationship between the threshold stress .DELTA. .sigma. $_{th}$ and the critical non-propagating crack length Lc can be written as .DELTA. .sigma. $_{th}$, Lc=C where m, C is constant. Further experiments were carried out on the effect of pearlitic structure and cyclic loading history on the length of critical non-propagating crack. It is shown that the length of critical non-propagating crack is closely related to both pearlite interlamellar spacing and cyclic loading history.ory. cyclic loading history.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1114-1124
• /
• 2015

In this paper, precipitation / non-precipitation pattern classification of meteorological radar data is conducted by using neuro-fuzzy algorithm. Structure expression of meteorological radar data information is analyzed in order to effectively classify precipitation and non-precipitation. Also diverse input variables for designing pattern classifier could be considered by exploiting the quantitative as well as qualitative characteristic of meteorological radar data information and then each characteristic of input variables is analyzed. Preferred pattern classifier can be designed by essential input variables that give a decisive effect on output performance as well as model architecture. As the proposed model architecture, neuro-fuzzy algorithm is designed by using FCM-based radial basis function neural network(RBFNN). Two parts of classifiers such as instance classifier part and echo classifier part are designed and carried out serially in the entire system architecture. In the instance classifier part, the pattern classifier identifies between precipitation and non-precipitation data. In the echo classifier part, because precipitation data information identified by the instance classifier could partially involve non-precipitation data information, echo classifier is considered to classify between them. The performance of the proposed classifier is evaluated and analyzed when compared with existing QC method.