• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.211-216
• /
• 2015

Recently, because of the growth in the leisure industry and interest in health, the demand for bicycles has increased. In this research, considering the vertical load on a bike frame under static state conditions, the deflection and mass of the bike frame were minimized by satisfying the service condition and performing optimization. The thickness of the bicycle-frame tube was set to a design variable, and its sensitivity was confirmed by an analysis of means (ANOM). To optimize the solution, a response-surface-method (RSM) model was constructed using D-Optimal and central composite design(CCD). The optimization was performed using a non-dominant sorting genetic algorithm (NSGA-II), and the optimal solution was verified by finite-element analysis.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.192-197
• /
• 2015

In many fields, the importance of reducing weight is increasing. A product should be designed such that it is profitable, by lowering costs and exhibiting better performance than other similar products. In this study, the mass and deflection of steel structures have to be reduced as objective functions under constraint conditions. To reduce computational analysis time, central composite design(CCD) and D-Optimal are used in design of experiments(DOE). The accuracy of approximate models is evaluated using the $R^2$ value. In this study, the objective functions are multiple, so the non-dominant sorting genetic algorithm(NSGA-II), which is highly efficient, is used for such a problem. In order to verify the validity of Pareto solutions, CAE results and Pareto solutions are compared.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.302-307
• /
• 2015

The automobile is an important means of transportation. For this reason, the automotive wheel is also an important component in the automotive industry because it acts as a load support and is closely related to safety. Thus, the wheel design is a very important safety aspect. In this paper, an optimal design for minimizing automotive wheel stress and increasing wheel safety is described. To study the optimal design, a central composite design (CCD) and D-optimal design theory are applied, and the approximate function using the response surface method (RSM) is generated. The optimal solutions using the non-dominant sorting genetic algorithm (NSGA-II) are then derived. Comparing CCD and D-optimal solution accuracy and verified the CCD can deduce more accuracy optimal solutions.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.815-824
• /
• 2015

In this study, we conducted the approximate multi-objective optimization of gap sizes of pressurized-water reactor (PWR) annular fuels. To determine the contacting tendency of the inner-outer gaps between the annular fuel pellets and cladding, thermoelastic-plastic-creep (TEPC)analysis of PWR annular fuels was performed, using in-house FE code. For the efficient heat transfer at certain levels of stress, we investigated the tensile, compressive hoop stress and temperature, and optimized the gap sizes using the non-dominant sorting genetic algorithm (NSGA-II). For this, response surface models of objective and constraint functions were generated, using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by NSGA-II were verified through the TEPC analysis, and we compared the obtained optimum solutions and generated errors from the CCD and D-optimal design. We observed that optimum solutions differ, according to design of experiments (DOE) method.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.535-541
• /
• 2015

본 연구에서는 벽걸이 모니터 브라켓 암의 다중목적 근사최적설계를 수행하였다. 이를 위해 브라켓 암의 자유도를 고려하여 평면내의 회전 각도를 선정해 응력과 처짐량이 크게 발생하는 경우에 대한 최적화 문제를 정식화 하였다. 직교배열표와 반응표면법을 사용하여 평균 및 파라미터 분석을 통해 성능지수에 대한 설계변수 민감도를 확인하였으며, 중심합성계획법과 D-최적 계획법을 사용하여 목적함수와 제한조건함수에 대하여 반응표면 근사모델을 생성하고 $R^2$ 값을 통해 정확도를 평가하였다. 이를 비지배 분류 유전알고리즘에 적용하여 최적화를 수행하고 유한요소해석을 통해 검증하였다. 또한, 중심합성 계획법과 D-최적 계획법을 이용한 최적해를 비교 분석하였다.