• 전기화학회지
• /
• 제12권3호
• /
• pp.245-250
• /
• 2009

Crosslinked membrane based on sulfonated polyimide was prepared by the introduction of crosslinkable monomer in polymerization process and crosslinking during membrane casting. Crosslinked membranes showed different properties from non-crosslinked membranes. Crosslinking decreased methanol crossover and therefore unit cell using crosslinked membrane showed increased open circuit voltage, 0.81 V, in comparison with unit cell using noncrosslinked membrane, 0.71 V. In addition, water uptake of crosslinked membrane, 40.5%, was lower than that of non-crosslinked membrane, 57.0%, and this resulted in improved dimensional stability. However, proton conductivity of crosslinked membranes showed rather low relative to non-crosslinked membrane due to reduced water uptake.

• Journal of Periodontal and Implant Science
• /
• 제53권3호
• /
• pp.207-217
• /
• 2023

Purpose: Non-crosslinked and crosslinked collagen membranes are known to exhibit distinct degradation characteristics, resulting in contrasting orientations of the adjacent tissues and different biological processes. The aim of this study was to conduct a histomorphometric assessment of non-crosslinked and crosslinked collagen membranes regarding neovascularization, tissue integration, tissue encapsulation, and biodegradation. Methods: Guided bone regeneration was performed using either a non-crosslinked (BG) or a crosslinked collagen membrane (CM) in 15 beagle dogs, which were euthanized at 4, 8, and 16 weeks (n=5 each) for histomorphometric analysis. The samples were assessed regarding neovascularization, tissue integration, encapsulation, the remaining membrane area, and pseudoperiosteum formation. The BG and CM groups were compared at different time periods using nonparametric statistical methods. Results: The remaining membrane area of CM was significantly greater than that of BG at 16 weeks; however, there were no significant differences at 4 and 8 weeks. Conversely, the neovascularization score for CM was significantly less than that for BG at 16 weeks. BG exhibited significantly greater tissue integration and encapsulation scores than CM at all time periods, apart from encapsulation at 16 weeks. Pseudoperiosteum formation was observed in the BG group at 16 weeks. Conclusions: Although BG membranes were more rapidly biodegraded than CM membranes, they were gradually replaced by connective tissue with complete integration and maturation of the surrounding tissues to form dense periosteum-like connective tissue. Further studies need to be performed to validate the barrier effect of the pseudoperiosteum.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.827-832
• /
• 2012

The crosslinked polyethylene (XLPE) is the most widely used insulating material for power cable. Due to its thermosetting characteristics, the XLPE can not be recycled, while the needs for the environmental friendly and recyclable insulator is rapidly increasing. In this paper, some important and basic electrical properties of non-crosslinked polyethylene such as conduction current characteristics, water the tree characteristics, AC breakdown test were experimentally investigated. It was shown that some of the tested samples had better performances from the application point of view for replacing current XLPE.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.397-402
• /
• 2005

To explore the potential of shell crosslinked micelle (SCM) as a drug carrier, the drug release behavior of poly($\varepsilon$-caprolactone)-b-poly(acrylic acid) (PCL-b-PAA) SCMs was investigated. PCL-b-PAA was synthesized by ring opening polymerization of $\varepsilon$-caprolactone and atom transfer radical polymerization of tert-butyl acrylate, followed by selective hydrolysis of tert-butyl ester groups to acrylic acid groups. The resulting amphiphilic polymer was used to prepare SCMs by crosslinking of PAA corona via amidation chemistry. The drug release behavior of the SCMs was studied, using pyrene as a model drug, and was compared with that of non-crosslinked micelles, especially below the critical micelle concentration (CMC). When the shell layers were crosslinked, the drug release behavior of the SCMs was successfully modulated at a controlled rate compared with that of the non-crosslinked micelles, which showed a burst release of drug within a short time.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.381-388
• /
• 2010

The purpose of this study was investigate the dyeing property on chitosan crosslinked cotton fabric with cochineal at variable conditions. Chitosan crosslinked cotton fabrics were manufactured by crosslinking agent epichlorohydrin in the presence of chitosan. Chitosan crosslinked cotton fabrics dyed using cochineal were post-mordanted using Al, Fe and Cu. The dyeability(K/S) of chitosan crosslinked cotton fabrics were measured by computer color matching. Additionally the fastness to washing and light were also investigated. The dye-uptake of chitosan crosslinked cotton fabrics increased with the dyeing time. The saturated dyeing time was about 20minutes at $60^{\circ}C$. The dyeability(K/S) was remarkably increased with increasing content of crosslinked chitosan because of having a amine group of chitosan. Chitosan crosslinked cotton fabrics were dyed yellowish red by non and Fe mordanting, blueish red by Al and Cu mordanting, respectively. The washing and light fastness were increased by mordanting, especially Cu and Fe mordanting.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.339-345
• /
• 2009

The core/shell type structure of the highly crosslinked poly(glycidylmetharylate-co-divinylbenzene) microspheres prepared in the precipitation polymerization in acetonitrile was thoroughly verified by means of swelling, $^1H$ NMR, XPS, TEM and TGA measurements. In the XPS measurement, the higher the GMA content, the higher the oxygen content was observed, implying that the higher content of GMA is observed in the particle surface. The further verification of the core/shell structure of the poly(GMA-co-DVB) particles was carried out using $^1H$ NMR and TEM techniques, resulting in the poly(GMA-co-DVB) particles with the GMA rich-phase and DVB rich-phase. In overall, the poly(GMA-co-DVB) microspheres consist of a highly crosslinked DVB rich-phase in the core and slightly or non-crosslinked GMA rich-phase in the shell part due to the different reaction ratios between two monomers and self-crosslinking density of DVB.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.534-539
• /
• 2004

Two biopolymers, silk fibroin (SF) and chitosan, were conjugated by tyrosinase (EC 1.14.18.1), a polyphenolic oxidase, to improve their physicochemical properties, such as their thermal properties and morphological stabilities in organic solvents. The crosslinking between SF and chitosan took place mainly through Michael addition reactions. A main reaction between the amino groups in chitosan and o-quinone, the oxidation product of the tyrosyl residue in SF, was confirmed by UV spectroscopy. Measurements of viscosity and light scattering indicated that the crosslinked SF/chitosan conjugate was compact: it had a smaller particle size because of tight bonding forces between the SF and chitosan molecular chains. Thermal decomposition of SF/chitosan conjugates crosslinked by tyrosinase occurred at higher temperatures. The adhesiveness of the SF/chitosan conjugates decreased steadily as the crosslinking reaction progressed. We propose that this new crosslinking method be used for the preparation of silk fibroin/chitosan conjugates using tyrosinase. We expect that SF/chitosan conjugates crosslinked by tyrosinase can be used preferentially in biomedical applications because of its unique properties and non-toxicity.

• 한국결정성장학회지
• /
• 제32권3호
• /
• pp.107-114
• /
• 2022

Carboxymethyl cellulose/poly(ethylene glycol) (CMC/PEG) hydrogels crosslinked with citric acid (CA) are synthesized to evaluate the effect of CMC molecular weight (Mw), PEG and CA concentration on the optical property, swelling rate (SR), degradation rate (DR), and cytotoxicity and cell proliferation of hydrogels. For crosslinked CMC/PEG hydrogels, the FT-IR peak intensity associated with hydroxyl groups decreases due to PEG intercalation (esterification crosslinking) between CMC chains in a similar manner as the concentration of CA crosslinker increases. Crosslinked CMC (Mw = 90,000)/PEG hydrogels with 10 % CA dissolve regardless of PEG content. However, the SR of the CMC (Mw = 250,000)/PEG hydrogels decrease from 4923 % to 168 % with increasing PEG and CA concentrations from 0 to 20 % and from 0 to 25 %, respectively. As the Mw of CMC increases, the DR of the hydrogel is greatly improved. CMC (Mw = 250,000)/PEG10 hydrogels with 10 % CA exhibit the optimum properties of high absorbing capacity (3,200 %) with moderate DR (54 %), stiffness (1.39 ± 0.19 GPa), and cell viability (94.8 ± 1.3 %). CA-crosslinked CMC/PEG hydrogels are highly suitable for wound dressing or personal care applications due to their non-toxicity, good cell proliferation, SR, and mechanical properties.

• 멤브레인
• /
• 제28권5호
• /
• pp.326-331
• /
• 2018

축전식 탈염(capacitive deionization)에 이용할 수 있는 폴리페닐렌 옥사이드(PPO) 음이온 교환막의 가교결합에 대해 조사하였다. 브롬화와 아민화 반응단계를 거쳐 PPO 음이온 교환 고분자를 제조하고 비스페놀 A 디글리시딜에테르(BADGE), m-페닐렌디아민(m-PDA), 헥사메틸렌디아민(HMDA) 등으로 가교하였다. 가교에 따른 겔화되는 시간은 HMDA > m-PDA > BADGE 순으로 짧았으며, 일정한 함량 이상으로 실온에서 가교하면 1-메틸피롤리돈(NMP)과 같은 비양성자성 용매(aprotic solvent)에 녹지 않아 내화학성이 증대되었다. 가교제(BADGE) 함량에 따른 음이온 교환막의 이온 교환 용량과 함수율을 측정하고 비교하였다. HMDA 용액에 침적하여 표면 가교한 PPO 음이온 교환막을 축전식 탈염에 적용한 결과 그 탈염 성능은 가교하지 않은 막과 비교하여 흡착단계의 초기 부분을 제외하고 거의 차이가 없었다.

• 멤브레인
• /
• 제14권3호
• /
• pp.240-249
• /
• 2004

본 연구에서는 polyvinylalcohol(PVA)의 hydroxyl 작용기와 sulfosuccinic acid (SSA)의 carboxylic acid 작용기의 반응을 통하여 열가교된 PVA막을 제조하였다. 설폰산기를 함유한 SSA는 PVA 매트릭스에 대한 가교제의 역할뿐만 아니라 수소이온의 전도도를 높이는 역할 모두를 수행하였다. PVA의 가교도(degree of crosslinking)는 SSA의 함량으로 조절하였고 가교밀도(crosslinking density)는 극성 및 비극성 용매를 이용하여 계산하였다. Xylene 및 benzene과 같은 비극성 용매를 사용한 경우 가교밀도는 SSA함량에 따라 증가하였다. 그러나, 물과 methanol과 같은 극성 용매를 사용한 경우 가교밀도는 SSA함량 20%까지 증가하다가 그 이상의 함량에서는 설폰산기의 영향으로 감소하였다. 가교도와 확산계수, 기계적 물성 및 전도도, 메탄올 투과도 등에 대한 PVA막의 특성을 평가하였고 이들 특성은 SSA함량에 의존하였다.