• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.521-528
• /
• 2021

The high-density fiber composite manufacturing method by the extrusion molding method has the characteristic that continuous production is possible, and the product is molded through a mold forming a specific cross-section. OPC is used as a defect material, an appropriate amount of SiO₂ is supplied for CaO reaction activity, and high density and high strength are expressed through steam and autoclave curing. However, due to the use of organic reinforcing fibers, the flame duration exceeds the regulations during the non-combustible performance test, making it difficult to secure performance. In this study, the product was produced by mixing alkali-resistant organic fiber and fly ash having voids as a binder by replacing the existing polypropylene fiber. appeared to be possible.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.2
• /
• pp.73-80
• /
• 2007

The preparation of oil absorbent using waste polyurethane was studied. And the effects of shape, size, and contents of waste polyurethane foam was investigated. The waste foam was treated in shape of powder, cube and bar type generated from rigid sandwich panel process. The tests for flexural strength, combustibility, and water absorptivity were carried out to investigate the mechanical and physical properties of the recycled foams. And the cell microstructure was evaluated through Scanning Electron Micrograph. The recycled foam containing powder-shaped underfilled and showed poor properties that was generated through reactivity of the resins and increasing of slurry viscosity. For the recycled foam with the cube and bar-shaped, the underfilling was caused by interference between the waste PUFs and increasing surface areas of PUF. Low cell density, non-uniformity of cell shape and size, and low adhesion of the boundary surface (new/recycled) was showed as a result of the poor properties. Considering underfilling and the properties of PUF (new/recycled), maximum recycle contents were less than 20 wt% for the powder and above 40 wt% for the cube and bar.

• Membrane Journal
• /
• v.25 no.4
• /
• pp.358-366
• /
• 2015

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, nontoxic, non-combustibility. After that, spiral wound module was manufactured with it including a woven paper. Effect of pH was studied by comparing permeate fluxes and rejection rates of the spiral wound module using simulation solution including kaolin and humic acid. The recovery rate and filtration resistance were calculated after water back-washing at the end of filtration experiment. In addition, after the water filtrated by the spiral wound module was passed through a column filled with GAC (granular activated carbon), adsorption effect of GAC was investigated by measuring the turbidity and $UV_{254}$ absorbance.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.180-190
• /
• 2015

PVDF (polyvinylidene fluoride) nanofiber has the advantages such as excellent strength, chemical resistance, nontoxic, non-combustibility. Flat membranes with 0.3 and $0.4{\mu}m$ pore size respectively, were manufactured by PVDF nanofiber, and then each spiral wound module was prepared with them. A woven paper was not included in preparing the module with $0.3{\mu}m$ pore size; however, it was included the module with $0.4{\mu}m$ pore size. The permeate fluxes and rejection rates of the two modules were compared using pure water and simulation solution including kaolin and humic acid. The recovery rate and filtration resistance were calculated after water back-washing. In addition, the effect of flow rate and trans-membrane pressure on treatment efficiency and filtration resistance were investigated for the spiral wound module with $0.4{\mu}m$ pore size.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.597-603
• /
• 2014

The cargo of ships and offshore structures is the number of oil of combustibility and volatile, oil processing cargo. Furthermore heavy cargo of the vehicle or container box or bulk cargo are occupied the remainder of cargo. In addition, there is a possibility to move the location of the cargo and the vessel because it is received periodic / non-periodic a load of wave and ocean current. Therefore a shipboard hazard is much greater than onshore industry hazard. Monitoring and preparation for safety are necessary things because there is always risk of accidents arise from the impact of the freight and cargo of ships and offshore structures. In this study, we conducted a study with respect to the introduction of the wireless sensor network monitoring system to ensure the safety of the crew and workers on shipboard.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.248-251
• /
• 1983

The effects of shading - 90, 70, 50, 30, 10% on curing burley tobacco was investigated in pipe vinyl houses. The curing in sunlight under transparent materials resulted in an increase in temperature and a decrease in relative humidity. But amount of light on tobacco leaves were less than 10% sun light in all treatments. Shading was delayed curing period, but cured leaves under transparent shading materials were off color and brittle. Filling power and combustibility were deteriorated as decreased shading. But quality of cured leaves were non significant between treatments. Effects of shading were believed that resulted in a decrease in temperature and an increase in relative humidity than light.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.99-107
• /
• 1998

This dissertationhas confirmed the non-flam mability of cast mold transformer that is increasingly used lately. As a research progress, the investigation has been performed on the installation status and each line of the subway system which have the most mold transformer accidents, and the impediment status of the transformer for rectifier and the high-voltage distribution transformer per each manufacturer. Then, a high voltage mold of the actual mold transformer has been installed in the horiwntal heating furnace and the heat has been applied by the standard heating temperature curve of KSF 2257(Fireproof testing meth od of the construction structures: 1993). Accordingly, the combustibility of the mold transformer based on the test results has been found that 78 minutes has been required for the complete burning per the KSF 2257 combustion test curve and that, after stopping the heat application of the horizontal furnace after ignition, the flame progress has not been made but shown as the self-extinguishing characteristics when the flame progress has been checked. Thus, the non-flammability and self-extinguishability of the mold transformer have been confirmed. The result of this dissertation has indicated that the accident involving mold transformer has been progressed and expanded by the dielectric breakdown or void due to the crack in the mold rather than a fire accident caused by a short-circuit or an overload.r an overload.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.283-288
• /
• 1982

This experiment was carried out to improve the cultural practices of seedlings and to investigate the proper planting density in aromatic tobacco, Sohang. Two different cultural practices of seedling were employed; Temporary transplanting (TT; Conventional practices) and non temporary transplanting (N.T.). Vinyl pot sizes were $3.5cm{\times}3.5cm, \;4cm{\times}4cm$ and $5cm{\times}5cm$ Plants per hole were 1, 3, 5, 7 and 9. There were little difference among the vinyl pot sizes in all characters except the survival ratio. But it may be little problem on cultural practices by 7 plants per hole in $5cm\times$5cm vinyl pot. There were not significant in price per kg, yield per 10a and value per 10a between two cultural practices of seedlings and among three pot sizes. Mildness and filling power were increased by increasing the plants per hole. Combustibility of 5-9 plants were better than those of 1-3 plants per hole. The growing of 6 seedlings per hole in $5cm\times$5cm vinyl pot by non temporary transplanting resulted the best cultural practices for an aromatic tobacco, Sohyang.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.200-206
• /
• 1996

Experiment was conducted to get the information about physico-chemical properties of flue-cured tobacco on the degree of maturity cultivated in paddy-upland rotated field, and compared to upland ones. For the samples of this experiment, 3~4 leaves at each stalk position were harvested from the bottom of plants. Physico-chemical properties of cured leaves were determined from the samples collected at weekly intervals, and of obtained from 4 stalk positions. For the degree of maturity, harvested leaves were separated with visual characters into four classes such as immature, mature, ripe, and mellow. Regardless of stalk position, the order of shrinkage rate with length and width of leaves was mellow> immature> ripe> mature, and ripe leaves from paddy field showed higher shrinkage rate than those of upland. Nicotine and total nitrogen contents were decreased with the degree of maturity while reducing sugar content were showed a reverse tendency. Ripe leaves from paddy field had lower reducing sugar contents, comparing with upland tobacco. Filling capacity of cured leaves from paddy field was decreased with degree of maturity, but there was no difference between upland and paddy tobacco. Shatter index was increased in the oeder of immature > mellow > mature > ripe. Chemical components of cigarette smoke from paddy field tobacco were little higher in $CO_2$ total particulate matter and tar contents, while combustibility was little lower than that of upland tobacco. It was also evaluated that paddy field tobacco was unfavorable for the non-volatile organic and higher fatty acids contents comparing with upland tobacco.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.