• 제목/요약/키워드: Non-Polarization

검색결과 281건 처리시간 0.031초

난소 적출 백서에 식립된 마이크로스크류에 교정력 부여 시 나타난 초기 경조직 변화에 관한 연구 (Early histological change in hard tissue from orthodontic force placed on microscrews in ovariectomized rats)

  • 이대승;장문정;이진우
    • 대한치과교정학회지
    • /
    • 제36권2호
    • /
    • pp.103-113
    • /
    • 2006
  • 중년 이후의 여성의 경우 칼슘 섭취가 부족하거나, 인위적인 난소 적출 또는 폐경 등으로 인하여 골밀도가 감소하는 경향이 있다. 이 경우 교정 치료 시, 골내 고정원으로 마이크로스크류를 이용할 수 있는지를 알아보기 위하여, 생후 4개월 된 Sprague-Dawley계 백서를 실험군으로 난소 적출(Ovariectomy Screw, OS)군, 대조군으로 Sham operation 시행한(Sham operation Screw, SS) 군의 두 군으로 나누었다. OS군과 SS군 모두 상악 대구치 사이 구개골에 마이크로스크류를 식립하였고, NiTi coil spring을 이용하여, 상악 중절치 2개를 견인하였다. 각 군당 3일, 7일 후 7마리씩 희생시켰다. 희생 3일전 Alizarin red S를 주입하고, 상악골, 장골, 심장혈을 채득한 후, 심장혈을 성분분석하고, 상악골과 장골은 비탈회 레진표본을 제작하여, 편광현미경, 형광현미경으로 관찰하였다. 심장혈을 통한 성분 조사 결과 OS군, SS군 모두 7일째 alkaline phosphatase (ALP)의 농도가 높게 나타나 골개조의 가능성을 보였고, 편광현미경 사진에서 SO, SS군에서 모두 마이크로스크류의 압박측, 긴장측, 치아의 긴장측에서 3일 보다 7일에서 기존골에 비하여 골밀도가 낮은 영역이 적었고, 치아의 압박측에서는 골밀도가 낮은 영역이 증가하였다. 형광 현미경 관찰결과는 3일째 보다 7일째에 더 Alizarin red S로 침착된 골이 나타난 것으로 보아, 새로운 골의 형성이 있었음을 나타내었다. 골다공증이 유도된 백서에서 계속된 골의 흡수보다는 골개조의 가능성이 증가하고, 신생골의 형성이 증가함을 확인할 수 있었고, 이는 골다공증에서도 마이크로스크류의 식립으로 고정원 확보가 가능한 것으로 생각한다.

Ti-30Ta-(3~15)Nb 합금에 HA/Ti 복합 코팅한 표면의 교류임피던스 특성 (A.C. Impedance Properties of HA/Ti Compound Layer coated Ti-30Ta-(3~15)Nb Alloys)

  • 정용훈;이호종;문영필;박근형;장승현;손미경;최한철
    • 한국표면공학회지
    • /
    • 제41권5호
    • /
    • pp.181-188
    • /
    • 2008
  • A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

교차류형 100W급 용융탄산염 연료전지 스택 장기운전평가 (Evaluation of Long Term Operation of Cross-flow Molten Carbonate Fuel Cell Stack)

  • 임희천;설진호;류철성;이창우;홍성안
    • 한국수소및신에너지학회논문집
    • /
    • 제6권2호
    • /
    • pp.53-63
    • /
    • 1995
  • 차세대의 새로운 발전방식인 용융탄산염형 연료전지 시스템개발 사업중 실용 스택개발을 위하여 전극유효연적이 $100cm^2$ 인 단위전지를 10단 적층한 Cross Flow형 MCFC스택을 제작하고 2성능측정설비를 구성하여 장기운전시험을 실시하였다 연료로는 $H_2/CO_2/H_2O$의 비율을 72%/18%/10% 로 조성한 가스를 이용하고 산화제가스로는 $O_2/CO_2$$Air/CO_2$ 비율이 33%/67%, 70%/30%가 되는 가스를 이용하여 운전할때의 초기성능 및 15A($150mA/cm^2$) 정부하 상태에서의 장기운전시험시의 전압 강하율을 조사하였다. 운전시간 310시간이 경과된 후의 스택전압은 8.39V이었고 이때의 출력은 125.8W를 보여주었다. 한편 1845시간이 경과한후 공기를 산화제로 이용하는 경우 전압은 6.95V로서 출력 104W를 나타내고 있다. 초기성능치에 의한 에너지 변환효율은 이용율이 40%인 경우 29.65%이었고 80%로 증가하는 경우 약 51.5%가 된다. 1840시간의 경과한때 까지의 전압 강하율은 약 52.4mV/1000hr로서 이전의 스택보다는 전압강하율이 감소되고 있으며 스택의 성능 저하의 주요한 요인은 개회로 전압의 저하로 내부단락동에서 기인하는 것으로 여겨진다. 또한 장기운전사 스택내부에서의 단위전지 전압분포가 균일하지 않음을 알 수 있어 이에 대한 개선을 필요로 한다.

  • PDF

민생 없는 민생 담론 -한국 종합일간지 사설에 대한 비판적 담론 분석 (Critical Approach to the Discourse of Livelihood in Korean Newspaper's Editorial)

  • 이정민;이상기
    • 한국언론정보학보
    • /
    • 제67권
    • /
    • pp.88-118
    • /
    • 2014
  • 이 연구는 첫째, 현대 한국사회의 신문사에 의해 발화되는 '민생'이 어떤 의미를 가지며, 그것을 지칭하는 구체적인 대상이 무엇인가를 밝히고자 했다. 둘째, 신문사에 의해서 형성되는 거대담론과 시간의 흐름에 따라 변하는 것 그리고 변하지 않는 것이 무엇인지를 고찰하고자 했다. 이를 위해 한국의 주요 종합일간지의 표제어에 '민생'이란 키워드를 담고 있는 사설들을 분석했다. 이를 통해 민생담론은 누적적으로 형성된 담론 관행이 시간의 흐름과 사회변화에 따라 변하는 것을 알 수 있었다. 정치적 관점에서는 정부별로 담론이 형성되고 전환되는 양상이 뚜렷하게 나타났다. 민생을 대변한다는 암묵적인 전제하에, 정부 정치권과 저항세력에 대해 적대적이나 공격적인 진술을 정당화했다. 또한 민생담론은 한국의 민주화 세계화 과정이라는 거대한 사회적 흐름과 관계했고, 민주화의 발전과정과 함께 비판의 주된 대상이 정부중심에서 정당중심으로 변해온 것을 확인할 수 있었다. 경제적인 관점에서 민생담론이 노동쟁의, 물가, 통화증가율, 주택문제, 외환위기 등을 해결하기 위한 노력이었다면, 환란이후인 2000년대 들어서는 경제성장과 분배문제부터 양극화 문제, 일자리 창출, 비정규직 철폐 등의 문제들로 전환되는 양상을 보였다. 우리사회에 위기가 닥칠 때마다 민생경제 담론은 경제정책을 주도하는 주체에 대해 비판을 가했지만, 위기를 벗어나려는 대안의 모색이나 구체적인 분석을 제시한 것은 아니었다. 결론적으로 한국의 주요종합일간지 신문사설에 의해서 생산되는 '민생'이란 단어의 의미는, 사전적 정의로서의 '국민생활' 그 자체와 거리가 있었다.

  • PDF

La 기반의 ABO3 구조를 갖는 첨가물에 따른 Bi0.5(Na0.78K0.22)0.5TiO3의 압전 및 전기적인 특성 향상 연구 (The Study on the Improvement of Piezoelectric and Electrical Characteristics of Bi0.5(Na0.78K0.22)0.5TiO3 Ceramics Modified by the La-based ABO3 Pervskite Structure)

  • 이규탁;박정수;윤지선;조정호;정영훈;백종후
    • 한국전기전자재료학회논문지
    • /
    • 제27권11호
    • /
    • pp.707-711
    • /
    • 2014
  • The $0.99Bi_{0.5}(Na_{0.78}K_{0.22})_{0.5}TiO_3-0.01LaAlO_3$, $0.01LaMnO_3$ or $0.01LaFeO_3$ (0.99BNKT-0.01LA, 0.01LM or 0.01LF) ceramics were prepared by a conventional mixed mothod. The structure and morphology of the lead free ceramics were characterized by XRD (X-ray diffraction) and FE-SEM (field emission scanning electron microscopy). XRD results indicated that the BNKT ceramics modified by LA, LM or LF induced a transition from a ferroelectric tetragonal to a non-polar pseudo-cubic phase, leading to decrease in the remnant polarization ($P_r$) and coercive field ($E_c$) in the P-E hysterisis loops. The effects of the BNKT ceramics modified by La-based $ABO_3$ pervskite structure on the electric-field induced strain were investigated, and the largest normalized unipolar strain ($S_{max}/E_{max}$) was found in BNKT-0.01LF ceramic.

고분자 전해질 연료전지에서 sPEEK 막을 이용한 전극과 막 합체(MEA)의 열화에 관한 연구 (Study on the Degradation of MEA Using Sulfonated Poly(ether ether ketone) Membrane in Proton Exchange Membrane Fuel Cells)

  • 이혜리;이세훈;황병찬;나일채;이정훈;오성준;박권필
    • Korean Chemical Engineering Research
    • /
    • 제54권3호
    • /
    • pp.305-309
    • /
    • 2016
  • 최근에 저가의 고분자 전해질 연료전지(Proton Exchange Membrane Fuel Cells, PEMFC)용 비불소계 전해질 막 연구개발이 활발히 진행되고 있다. 본 연구에서는 sulfonated Poly (ether ether ketone) (sPEEK) MEA 내구성을 시험하기 위해 열화 가속화 기법을 이용하여 막과 전극이 동시에 열화되는 MEA 열화 실험을 진행하였다. 열화 전과 후에 I-V 분극곡선, 수소투과도, 전극 활성 면적, 막 저항과 부하 전달 저항을 측정하여 열화 전과 후를 비교하였다. sPEEK 막의 수소 투과도는 낮았지만, 저가습 OCV 조건에서 발생하는 라디칼에 Nafion과 같은 불소계막보다 sPEEK 막이 약했다. MEA 열화 실험 결과 144시간 후와 271시간 후 성능이 각각 15%와 65% 감소하였다. 144이후 급격한 성능감소의 주요인은 막에 발생한 핀홀의 Pt/C 입자에 의한 shorting 현상이라고 본다.

UV 노광과 RTA 공정의 도입이 Sol-Gel 법으로 제조한 강유전성 Sr0.9Bi2.1Ta1.8Nb0.2O9 박막의 결정성 및 유전/전기적 특성에 미치는 영향 (Effects of the Introduction of UV Irradiation and Rapid Thermal Annealing Process to Sol-Gel Method Derived Ferroelectric Sr0.9Bi2.1Ta1.8Nb0.2O9 Thin Films on Crystallization and Dielectric/Electrical Properties)

  • 김영준;강동균;김병호
    • 한국전기전자재료학회논문지
    • /
    • 제17권1호
    • /
    • pp.7-15
    • /
    • 2004
  • The ferroelectric SBT thin films as a material of capacitors for non-volatile FRAMs have some problems that its remanent polarization value is relatively low and the crystallization temperature is quite high abovc 80$0^{\circ}C$. Therefore, in this paper, SBTN solution with S $r_{0.9}$B $i_{2.1}$T $a_{1.8}$N $b_{0.2}$$O_{9}$ composition was synthesized by sol-gel method. Sr(O $C_2$ $H_{5}$)$_2$, Bi(TMHD)$_3$, Ta(O $C_2$ $H_{5}$)$_{5}$and Nb(O $C_2$ $H_{5}$)$_{5}$ were used as precursors, which were dissolved in 2-methoxyethanol. SBTN thin films with 200 nm thickness were deposited on Pt/Ti $O_2$/ $SiO_2$/Si substrates by spin-coating. UV-irradiation in a power of 200 W for 10 min and rapid thermal annealing in a 5-Torr-oxygen ambient at 76$0^{\circ}C$ for 60 sec were used to promote crystallization. The films were well crystallized and fine-grained after annealing at $650^{\circ}C$ in oxygen ambient. The electrical characteristics of 2Pr=11.94 $\mu$C/$\textrm{cm}^2$, Ps+/Pr+=0.54 at the applied voltage of 5 V were obtained for a 200-nm-thick SBTN films. This results show that 2Pr values of the UV irradiated and rapid thermal annealed SBTN thin films at the applied voltage of 5 V were about 57% higher than those of no additional processed SBTN thin films. thin films.lms.s.s.

Frontiers in Magneto-optics of Magnetophotonic Crystals

  • Inoue, M.;Fedyanin, A.A.;Baryshev, A.V.;Khanikaev, A.B.;Uchida, H.;Granovsky, A.B.
    • Journal of Magnetics
    • /
    • 제11권4호
    • /
    • pp.195-207
    • /
    • 2006
  • The recently published and new results on design and fabrication of magnetophotonic crystals of different dimensionality are surveyed. Coupling of polarized light to 3D photonic crystals based on synthetic opals was studied in the case of low dielectric contrast. Transmissivity of opals was demonstrated to strongly depend on the propagation direction of light and its polarization. It was shown that in a vicinity of the frequency of a single Bragg resonance in a 3D photonic crystal the incident linearly polarized light excites inside the crystal the TE- and TM-eigen modes which passing through the crystal is influenced by Brags diffraction of electromagnetic field from different (hkl) sets of crystallographic planes. We also measured the faraday effect of opals immersed in a magneto-optically active liquid. It was shown that the behavior of the faraday rotation spectrum of the system of the opal sample and magneto-optically active liquid directly interrelates with transmittance anisotropy of the opal sample. The photonic band structure, transmittance and Faraday rotation of the light in three-dimensional magnetophotonic crystals of simple cubic and face centered cubic lattices formed from magneto-optically active spheres where studied by the layer Korringa-Kohn-Rostoker method. We found that a photonic band structure is most significantly altered by the magneto-optical activity of spheres for the high-symmetry directions where the degeneracies between TE and TM polarized modes for the corresponding non-magnetic photonic crystals exist. The significant enhancement of the Faraday rotation appears for these directions in the proximity of the band edges, because of the slowing down of the light. New approaches for one-dimensional magnetophotonic crystals fabrication optimized for the magneto-optical Faraday effect enhancement are proposed and realized. One-dimensional magnetophotonic crystals utilizing the second and the third photonic band gaps optimized for the Faraday effect enhancement have been successfully fabricated. Additionally, magnetophotonic crystals consist of a stack of ferrimagnetic Bi-substituted yttrium-iron garnet layers alternated with dielectric silicon oxide layers of the same optical thickness. High refractive index difference provides the strong spatial localization of the electromagnetic field with the wavelength corresponding to the long-wavelength edge of the photonic band gap.

RF magnetron sputtering으로 제조된 강 유전체 $SrBi_2Ta_2O_9$ 박막의 열처리 온도에 따른 특성 연구 (Characterization of Ferroelectric $SrBi_2Ta_2O_9$ Thin Films Deposited by RF Magnetron Sputtering With Various Annealing Temperatures)

  • 박상식;양철훈;윤순길;안준형;김호기
    • 한국세라믹학회지
    • /
    • 제34권2호
    • /
    • pp.202-208
    • /
    • 1997
  • Bi층 SrBi2Ta2O9(SBT)박막을 상온에서 rf magnetron sputtering에 의해 Pt/Ti/SiO2/Si기판위에 증착한 다음 산소 분위기 하에서 1시간동안 75$0^{\circ}C$, 80$0^{\circ}C$, 85$0^{\circ}C$로 열처리하였다. 타겟은 박막내의 Bi와 Sr의 부족을 보상하기 위해 20mole%의 Bi2O3와 30mole%의 SrCO3를 과잉으로 넣어 사용하였으며, 80$0^{\circ}C$로 열처리한 박막의 조성은 Sr0.7Bi2.0Ta2.0O9.0이었다. 200nm의 두께를 갖는 이 SBT박막은 치밀한 미세구조와, 1MHz의 주파수에서 210의 유전상수, 0.05의 유전손실을 나타내었고, 또한 100 kMz에서 32$0^{\circ}C$의 큐리온도를 나타냈으며 그 온도에서의 유전상수는 314이었다. 이 SBT박막의 잔류분극(2Pr)과 항전계(2Ec)값은 각각 인가전압 3V에서 9.1$\mu$C/$\textrm{cm}^2$과 85kV/cm이었고, 5V의 bipolar pulse 하에서 1010 cycle까지 피로현상이 나타나지 않았으며, 누설전류 밀도는 150kV/cm에서 7$\times$10-7A/$\textrm{cm}^2$의 값을 보였다. rf magnetron sputtering 으로 제조된 SBT박막은 비휘발성 메모리 소자에의 응용이 가능하다.

  • PDF

친수성을 가지는 에틸셀룰로스-폴리에틸렌글리콜 가지형 고분자의 정삼투 복합막 지지층으로의 응용 (Thin-Film Composite (TFC) Membranes with Hydrophilic Ethyl Cellulose-g-poly(ethylene glycol) (EP) Substrates for Forward Osmosis (FO) Application)

  • 유윤아;김진주;강효;이종찬
    • Korean Chemical Engineering Research
    • /
    • 제54권4호
    • /
    • pp.510-518
    • /
    • 2016
  • 본 연구에서는 폴리에틸렌글리콜-카르복실산과 에틸셀룰로스 사이의 에스테르화 반응을 통해 에틸셀룰로스-폴리에틸렌글리콜 가지형 고분자를 합성하고 이를 정삼투 수처리 공정을 위한 복합막의 지지체 소재로 사용하고자 하였다. 합성한 에틸셀룰로스-폴리에틸렌글리콜은 핵자기공명 분광법 및 푸리에 변환 적외선 분광법을 통해 그 구조를 확인하였다. 비용매 유도 상분리법을 통해 에틸셀룰로스-폴리에틸렌글리콜 소재를 이용한 지지체를 형성하여 이를 에티셀룰로스 지지체와 비교해 보았을 때, 폴리에틸렌글리콜 작용기의 도입으로 인하여 친수성이 증가한 것을 확인하였다. 지지체 위에 계면중합을 통해 폴리아미드 활성층이 추가된 복합막을 형성하였고, 염화나트륨 용액을 유도 용액으로 사용하여 cross-flow 방식의 정삼투 수처리 장치에서의 성능을 비교하였다. 2M 농도의 염화나트륨 수용액을 유도 용액으로 사용하였을 때, 6.6 LMH의 수투과도를 보이는 에틸셀룰로스 지지체를 사용한 복합막에 비해, 에틸셀룰로스-폴리에틸렌글리콜 지지체를 사용한 복합막은 15.7 LMH의 증가된 수투과도를 보여주었으며, 이는 지지체의 증가된 친수성에서 기인한 것이다. 이러한 결과는 에틸셀룰로스-폴리에틸렌글리콜 지지체를 이용한 복합막의 막구조 파라미터가 감소한 것에서도 설명할 수 있으며, 지지체 소재의 친수성 증가가 정삼투 공정에 최적화된 복합막 지지체 구조를 형성할 수 있음을 시사한다.