• 한국가금학회지
• /
• 제51권2호
• /
• pp.97-106
• /
• 2024

본 연구는 육계(Ross 308, Arbor Acres)에서 나타나는 가슴살 경화도를 비침습적 디지털 촉진장치인 MyotonPRO^®를 사용하여 분석하였다. 이 논문의 목적은 육계의 생축에서 가슴 경직성의 변이를 측정할 수 있는가와 그 변이가 다른 형질과 어떤 상관을 갖는 지 알아보는 것이다. 연구결과, Ross 308과 Arbor Acres 모두에서 주령에 따라 가슴살 경화도의 변화가 관찰되었으며, 특히 2주차와 8주차에 높은 심각도를 보였다. 연구된 다양한 측정 형질들은 모두 WB의 발현과 관련이 있음을 보여준다. 또한, 가슴살의 무게와 가슴살 경화도 간에는 높은 양의 상관관계가 관찰되어, 증가하는 가슴살 무게가 가슴살 경화도 증가와 연관될 수 있음을 시사한다. 본 연구에서는 Ross 308과 Arbor Acres 품종의 가슴살 Stiffness를 측정하고 이를 WB 현상이 보고된 Ross 708의 데이터와 비교했으며, Ross 308과 Arbor Acres에서는 Ross 708에 비해 상대적으로 낮은 Stiffness 수치가 관찰되어 WB 현상이 발현되지 않았음을 시사한다. 이 결과는 품종에 따른 가슴살의 특성 차이를 나타내며, WB 발현에 영향을 미치는 요인에 대한 추가 연구가 필요하다고 사료된다. 사양 실험에서 나타난 결과는 Ross 308과 Arbor Acres 품종에서 WB 발생률과 관리 전략에 대한 이해를 높이는데 기여하며, 더 나아가 가금산업에서 WB를 줄이기 위한 유전적 선발 및 사육 관리 기법 개발에 중요한 정보를 제공할 것으로 기대된다. 또한 본 연구에서는 MyotonPRO^® 장비의 효율성과 한계에 대한 평가도 포함되어 있으므로 향후 연구에서는 이 장비의 활용성을 더욱 개선할 수 있는 방안을 모색하는 데 기여하고자 한다.

• 한국수정란이식학회지
• /
• 제22권2호
• /
• pp.121-126
• /
• 2007

본 연구에서 돼지 난포란에서 채취된 난모 세포들을 체외성숙 후 형태적으로 선별하거나 극체 방출란을 선별하여 활성화 처리 후 48시간째에 분할란을 선별할 때 배발달율이 어느정도 향상되는지를 검토하였다. 난모 세포를 48시간 성숙 배양 후 형태적 선별과 극체의 방출 유무를 검사하고, 선별된 난모 세포들을 $16{\sim}18$시간 추가 배양한 후 7% ethanol로 활성화시키고 $5{\mu}g/ml$ cytochalasin B에 5시간 노출 후 PZM-5 배 양액으로 7일간 배양하였으며, 배양 중 4일째 5% FBS를 추가하였다. 48시간 성숙 후 형태적으로 선별하였을 때, 21.9%가 제거되고 78.1%가 선별되었으며, 극체 방출란을 선별하였을 때, 32.1%가 제거되고, 67.9%가 선별되었다. 형태적으로 선별한 난자를 활성화 처리하여 48시간째에 분할율을 검사하였을 때, 15.8%가 분할하지 않았으며, 52.6%가 정상 분할하였고, 31.6%가 과분할하였으며, 극체 방출란을 선별하여 활성화 처리 후 분할율을 검사하였을 때 7.1%가 분할하지 않았으며, 73.1%가 정상 분할하였고, 19.8%가 과분할하였다. 체외 성숙된 난모세포를 형태적으로 선별하고 활성화 처리 후 분할란을 선별하지 않았을 때, 16.7%가 배반포기로 발달하였고, 형태적으로 선별하고 분할란을 추가로 선별해 배양했을 때 31.7%가 배반포기로 발달하였으며, 극체 방출란만을 선별하여 활성화 처리 후 분할란을 선별하지 않았을 때 39.0%가 배반포기로 발달하였고, 극체 선별과 분할란 선별을 하였을 때 배반포기 발달율이 49.0%에 이르렀다. 48시간째 미분할 난자와 정상 분할 난자, 과분할 난자를 배양하였을 때 48시간째 미분할 난자는 배반포기로 발달하지 못했으며, 정상 분할 난자는 42.5%, 과분할 난자는 4.5%가 배반포기로 발달하였다. 분할하는 시기를 활성화처리 후 12시간 간격으로 조사하였을 때 $0{\sim}12$시간 사이에 4.1%가 분할하였고, $12{\sim}24$시간 사이에 68.6%, $24{\sim}36$ 시간 사이에 19.1%, $36{\sim}48$시간 사이에 2.3%, 48시간까지 미분할 난자가 5.9%였으며, $0{\sim}12$시간 사이에 분할한 난자나 $36{\sim}48$시간 사이에 분할한 난자에서 배반포기로 발달한 난자는 없었으며, $12{\sim}24$시간 사이에 분할한 난자의 39.1%, $24{\sim}36$시간 사이에 분할한 난자의 9.5%가 배반포기로 발달하였다. 이상의 결과로 극체 방출란만을 선별하여 $12{\sim}36$시간 사이에 분할하는 난자들만을 선별하여 배양한다면 배발생능을 가진 난자들의 비율을 높일 수 있을 것으로 사료된다.

• Clinical and Experimental Pediatrics
• /
• 제46권12호
• /
• pp.1200-1206
• /
• 2003

목 적 : 중등도 신생아 호흡곤란 증후군 환아에서 인공호흡기 이탈시 low IMV, 기관내 CPAP, 기도 발관의 고전적 방법과 비침습적인 비강내 CPAP 조기 사용을 비교함으로써 비강내 CPAP의 활성화를 위해 본 연구를 시행하였다. 방 법 : 2001년 11월부터 2002년 6월까지 본원 출생아로서 중등도 신생아 호흡곤란 증후군으로 진단된 환아 중 폐 표면활성제를 투여한 뒤 인공호흡기 치료를 시행하고, 이탈시 비강내 CPAP으로 조기 전환한 환아 30례를 연구군으로 하고, 1999년 1월부터 2001년 9월까지 본원 출생아이며 중등도 호흡곤란 증후군으로 진단된 환아 중 폐 표면활성제를 투여하고 인공호흡기 치료를 시행한 뒤 low IMV, 기관내 CPAP의 과정으로 이탈한 환아 30례를 대상으로 하여 재태연령과 출생체중, 1분 및 5분 Apgar 점수, SMR 검사, 임상증상, 동맥혈 가스 분석, 인공호흡기 치료기간, 임상경과, 이탈 성공률, 이탈기간과 동반된 합병증등을 후향적으로 분석하였다. 결 과 : 1) 대상아의 특징 : 평균 재태연령은 연구군이 $28.3{\pm}1.6$주이고, 대조군이 $29.3{\pm}1.5$주였고, 평균 출생체중은 연구군이 $1,238.3{\pm}158.6gm$, 대조군이 $1,270{\pm}133.8gm$이었으며, 양 군에서 남아가 반수 이상이었으며, SMR은 양 군에서 약 양성으로 양 군간에 유의한 차이가 없었다. 신생아 호흡곤란 증후군은 양 군에서 중등도였다. 2) 양 군에서 동맥혈 가스 분석 및 호흡지표의 변화 : 인공호흡기 설정시 시행한 동맥혈 가스 분석상 pH, $PaO_2$는 연구군에서 각각 $7.3{\pm}0.1$, $39.7{\pm}3.4mmHg$, 대조군이 $7.3{\pm}0.1$, $39.3{\pm}3.9mmHg$였고, 평균 기도압은 연구군 $6.1{\pm}0.6cmH_2O$, 대조군이 $6.2{\pm}0.8cmH_2O$였으며, 산소화 지수는 연구군에서 $10.8{\pm}1.6$, 대조군에서 $11.8{\pm}1.9$를 나타내어 두 군에서 유의한 차이는 없었다. 환아가 안정화되었을 때 시행한 동맥혈 가스 검사에서 $PaCO_2$, $PaO_2$는 연구군에서 $37.4{\pm}4.6mmHg$, $88.8{\pm}5.9mmHg$였고, 대조군에서 $36.9{\pm}4.5mmHg$, $89.8{\pm}4.8mmHg$로 큰 차이가 없었다. 인공호흡기 이탈을 시도한 후 1시간과 12시간 뒤에 시행한 동맥혈 가스 검사에서 대조군의 $PaCO_2$는 각각 $41.4{\pm}4.0mmHg$와 $42.2{\pm}4.8mmHg$로 이산화탄소의 저류가 관찰되었으나 이탈을 성공한 뒤에는 $38.3{\pm}5.5mmHg$로 정상화되었다. 연구군에서는 이탈 전 기간동안 $PaCO_2$에 큰 변화가 없었다. 3) 양 군에서 임상경과 및 인공호흡기 치료기간 비교 : 연구군에서 30례 중 28례(93.3%)에서 이탈에 성공하였고, 나머지 2례는 반복되는 무호흡과 제반증상의 악화로 인공호흡기 치료로 전환되었다. 대조군에서는 30례 중 24례(80%)에서 이탈에 성공하였고 실패한 경우는 반복되는 심한 무호흡이 4례, 심한 호흡성산증이 2례 관찰되었다. 연구군에서 평균 인공호흡기 치료기간은 $2.5{\pm}2.2$일이며 비강내 CPAP으로 $1.4{\pm}0.6$일간 치료하였고, 대조군에서 인공호흡기 치료기간은 $2.9{\pm}3.3$일이었고 low IMV와 기관내 CPAP의 사용기간은 $1.5{\pm}0.8$일로 양 군에서 유의한 차이는 없었다. 4) 양 군에서 인공호흡기 이탈기간 동안 발생한 합병증의 비교 : 연구군에서 비강내 CPAP을 사용하여 이탈한 기간 동안 발생한 합병증은 공기누출 증후군 1례, 패혈증 1례, 비강과 구강의 미란이 2례가 있었으며, 비강내 CPAP의 고정의 문제가 2례에서 발생하였다. 또한 지속적 양압으로 인하여 1례에서 복부팽대 소견을 보였고, 2례에서 서혜부 탈장이 관찰되었으나 수술적 처지는 필요하지 않았다. 대조군에서는 공기누출 증후군 2례, 무기폐3례, 비강과 구강의 미란이 2례 있었으며, 기관 삽관으로 인한 문제로 자연적 발관이 1례, 기관내관 말단 위치가 기관분기부상방 0.2-2.0 cm 사이에 고정되지 않은 경우 2례, 점액으로 인한 기관내관이 막힌 경우가 2례 관찰되었다. 결 론 : 중등도 신생아 호흡곤란 증후군 환아에서 고전적인 low IMV, 기관내 CPAP의 과정을 거치지 않고 비강내 CPAP으로 전환하는 적극적인 인공호흡기 이탈이 가능하였고, 사용상의 어려움도 없었다. 따라서, 인공호흡기 이탈시 비침습적인 비강내 CPAP의 조기 사용을 시도해 볼 수 있을 것으로 사료된다.

• 수면정신생리
• /
• 제9권1호
• /
• pp.24-33
• /
• 2002

목 적 : 폐쇄성 수면무호흡증(이하 수면무호흡증) 환자에서 고혈압이 흔히 병발되나 지속적 상기도 양압술(이하 양압술)에 따른 고혈압 해소 정도는 연구방법에 따라 상이한 결과를 보이고 있다. 이에 저자들은 지속적-비관혈적 혈압 측정법을 이용하여 기초 혈압치가 다양한 수면무호흡증 환자군에서 양압술을 적용하면서 야간 수면중 혈압 및 심박 동수 반응에 양압술이 미치는 영향을 연구하고자 하였다. 또한 양압술에 의한 혈역학적 변화에 영향을 줄 수 있는 요인들을 찾고자 하였다. 방 법 : 연구대상으로는 수면무호흡증의 임상 증상을 지니고 있으며 기초 측정일의 야간 수면다원검사 결과 호흡장애지수가 5이상인 환자 10명(평균연령 52.2$\pm$12.4세, 남자 9명, 여자 1명)을 선택하였다. 양압술을 시행하지 않은 상태인 기초 측정일과 양압술을 시행한 양압술 시행일 모두에서 야간 수면다원기록과 동시에 지속적-비관혈적 혈압측정기($Finapres^{(R)}$)를 사용하여 매 박동(beat-to-beat)시의 수축기 혈압, 이완기 혈압, 그리고 심박동수를 측정하였다. 또한 매 2초마다 혈중산소포화도($SaO_2$)를 측정하였다. 기초 측정일과 양압술 시행일 두 군간에 혈역학적 및 호흡기적 변인들의 평균치를 비교하였다. 기초 측정일 값에서 양압술 시행일 값을 뺀 수축기 혈압 델타값 및 이완기 혈압 델타값 각각과 기초 측정일의 측정치들(수축기 혈압, 이완기 혈압, 그 각각의 혈압 변이도, 심박동수 및 심박동수 변이도, 혈중산소포화도 평균치, 그리고 호흡장애지수), 양압술 시행일의 측정치들(양압술 처방압력 및 총 각성시간 분율), 연령, 그리고 비만도 간의 상관관계를 분석하였다. 결 과 : 1) 혈중 산소포화도의 평균치와 호흡장애지수가 기초 측정일에 비해 양압술 시행일에서 각각 증가(p<.01) 및 감소(p<.01)하였으나, 혈역학적 변인을 포함한 다른 비교 변인들에서는 차이가 없었다. 2) 기초 측정일의 혈압에서 양압술 시행일의 혈압을 뺀 델타값들을 분석한 결과 기초 측정일의 혈압치와 대상군의 연령에 따라 혈압 반응이 차별적으로 나타났다. 수축기 혈압 델타값과 기초 측정일의 수축기 혈압간에 유의한 정적 상관관계를 보였으나(p<.01), 이완기 혈압 델타값과 기초 측정일의 이완기 혈압간에는 각성기(p<.01)를 제외한 다른 수면단계에서 유의한 상관관계가 없었다. 렘수면단계를 제외한 모든 수면단계에서 이완기 혈압의 델타값과 연령 사이에 유의한 역 상관관계가 있었지만(p<.05), 수축기 혈압의 델타값과 연령 간에는 유의한 상관관계가 없었다. 3) 수축기 혈압 델타값 및 이완기 혈압델타값 각각과 기초 측정일의 측정치들, 양압술 시행일의 측정치들, 그리고 비만도 간의 상관관계를 분석한 결과, 이완기 혈압 델타값과 양압술 시행일의 각성시간 분율간의 유의한 정적 상관관계(p<.01) 외에는 유의한 상관관계가 없었다. 결 론 : 양압술 적용에 따라 수축기 혈압 델타값과 이완기 혈압 델타값이 기초 측정일의 수축기 혈압치와 대상군의 연령에 따라 각각 증가 또는 감소하였다. 따라서, 본 연구는 양압술에 따른 혈압 반응은 단순 감소로 나타나는 것이 아니라 여러 변인의 조건에 따라 차별적 혈압 반응 양상으로 나타나는 복합적인 현상이며 앞으로 좀더 세밀하게 연구되어야 할 대상임을 시사한다.

• 핵의학기술
• /
• 제17권2호
• /
• pp.31-36
• /
• 2013

위배출 시간 측정(Gastric Emptying Time, GET)은 비침습적이고 정량적 평가 방법으로서 주로 내시경이나 방사선적 검사로 기계적 폐쇄가 없음이 확인된 위정체 증상을 보이는 환자를 검사한다. 이와 같은 일반적인 위배출 시간 측정 검사 외에 식도암 환자(식도 절제술을 시행한)를 대상으로 수술 직후와 1년 이상의 시간이 지난 후의 위배출 시간 측정 검사를 시행하여, 수술 후 흉강내에서 위장 기능의 평가 자료로서 위배출 시간 측정 검사의 유용성을 평가하고자 한다. 본원을 내원해서 식도 절제술을 시행한 환자 93명을 대상으로 위배출 시간 측정 검사를 수술 직후와 1년 이상의 시간이 지난 후에 두 번 시행하였다. 환자의 검사 전 준비사항으로는 12시간 이상 밤새 공복과 약재나 흡연을 중단 시켜야 하고 당뇨병 환자는 인슐린 주사 후 아침 일찍 검사하는 것이 이상적이다. 검사 방법은 유동식의 위배출 시간 측정은 예민도가 떨어지므로 시행하지 않고, 고형식의 위배출 시간 측정 방법으로 $^{99m}Tc-DTPA$로 표지된 레진이 들어간 계란찜, 그리고 김밥과 점성이 높은 발효유와 함께 먹은 후 입위 자세로 3시간 동안 측정하였다. 검사의 평가 방법은 위배출 곡선 상에서 위내 방사능치가 50%가 되는 시간, 즉 반감기(T1/2)를 구하였고, 반감기가 180분 이상시 지연 위배출, 180분 이내는 중등도, 삼킴과 동시에 소장으로 넘어가는 경우를 급속 위배출로 구분하였다. 일반적인 위배출 시간 측정 영상은 위의 전정부와 위저부가 강하게 나타나는 영상에서 시간이 지남에 따라 소장으로 넘어가는 영상이지만, 식도 절제술을 시행한 식도암 환자는 흉강쪽에 강한 집적 영상을 보였다. 수술 직후 반감기(T1/2)는 급속 위배출이 12.9%, 중등도 위배출이 52.7%, 지연 위배출이 34.4%로 나타났다. 이후 1년 이상의 시간이 흐른 뒤의 반감기 결과는 수술 직후 급속 위배출 환자 중 67%가 중등도 위배출로, 지연 위배출을 보였던 환자는 69%가 중등도 위배출로 나타났다. 중등도 위배출을 보였던 환자 중 급속 위배출 이나 지연 위배출로 나빠진 경우는 24%이다. 식도 절제술을 시행한 식도암 환자의 위배출 시간 측정 검사는 반감기(T1/2)가 급속 위배출 및 지연 위배출에서 시간이 지날수록 중등도 위배출로 변하는 소견을 보였다. 이는 주로 위를 보는 위배출 시간 측정 검사가 흉강내의 식도를 대신하는 위장 기능의 평가에도 유용하게 쓰일 수 있다는 것을 의미한다. 그리고 평가 기준을 세분화하고 검사의 시간 간격을 좁힌다면 좀 더 많은 정보와 분석으로 정확한 임상 진단과 평가가 이루어질 것으로 보인다.

• Journal of Chest Surgery
• /
• 제39권7호
• /
• pp.511-519
• /
• 2006

배경: 허혈성 심근손상으로 인한 심근경색이나 심근병증으로 인한 심근의 비가역적인 손상은 관상동맥 중재술이나 관상동맥 우회로술 등의 치료로 손상 받은 조직의 손상 정도를 경감시키고 추가적인 손상을 방지할 수 있으나, 괴사된 심근세포를 재생할 수는 없다. 결국 중증의 심부전증이 발생한 경우 심근성형술을 시행하거나 심실보조장치 또는 인공심장 등의 한시적 치료 방법이 시도되기도 하지만, 최종적으로 심장이식 이외의 방법은 현재로서는 제시되지 못하고 있다. 심장 공여자의 부족으로 인한 한계를 극복하기 위해서 세포이식을 통한 치료에 대한 연구가 활발히 진행되고 있는데, 이러한 세포치료에서 가장 넓게 시도되고 이용된 장기는 골수이며, 현재까지 골격근아세포, 평활근 세포, 그리고 심근 세포 등 다양한 세포의 이식이 시도되고 있다. 그러나 이러한 골수는 채취하는 과정이 침습적이어서 환자에게 과다한 통증을 주며, 추출된 세포의 수가 부족한 단점이 있어서, 이러한 문제를 해결하기 위해서 상대적으로 접근이 용이하며, 다량의 조직을 확보할 수 있는 지방조직에서의 성체 줄기세포의 추출이 제시되었다. 대상 및 방법: 본 연구에서는 백서의 지방조직을 복부 피하지방 조직과 복강 내 지방조직으로 나누어 각각 분리 추출하여 두 조직에 동일한 과정의 세포 추출 과정을 거친 후, 5-azacytidine을 이용한 심근세포로의 분화 유도를 시도하였다. 심근 분화유도에 적합한 환경을 찾기 위해서 5-azacytidine을 각각 다른 농도로 사용하였고, 지방에서 추출한 성체 중간엽 줄기세포의 심장질환에서의 임상적용의 가능성과 지방조직의 부위에 따른 분화 유도의 차이 가 있는지 관찰하고자 하였다. 백서의 복부 피하지방 조직을 적출하여 실험조직 1로 정하였고, 복강 내 대망(omentum)과 후복막 지방조직을 적출하여 실험조직 2로 정하였다. 적출된 조직에서 collagenase, $NH_4Cl$ 등을 이용하여 세포를 추출하였고, 이를 10% FBS를 함유한 DMEM solution에서 배양하였으며, 1차 또는 2차 계대배양을 거쳐서 5-azacytine을 각각 none, $3{\mu}mol/L,\;6{\mu}mol/L,\;9{\mu}mol/L$의 농도로 첨가하여 심근세포로의 분화를 유도하였다. 4주간의 배양이 끝난 후 각 실험 조직군의 세포들을 cell blocks으로 만든 후에, CD34, heavy myosin chain, troponin T, SMA에 대한 항체를 이용하여 면역형광염색을 시행하였고, 형광염색에 반응을 보인 세포들의 대략적 비율을 비교하였다. 결과: CD34, heavy myosin chain에 대하여는 모두 음성이었으나, SMA에 대해서는 $3{\mu}mol/L,\;6{\mu}mol/L$의 복강 내 지방조직에서 $5{\sim}10%$ 정도의 양성반응을 보였고, troponin T에 대하여는 피하지방조직과 복강 내 지방조직 모두에서 $6{\mu}mol/L$와 $9{\mu}mol/L$에서 $10{\sim}15%$ 정도의 양성 반응을 보였다. 결론: 본 연구 결과, 지방조직에서 추출한 중간엽 줄기세포는 심근세포로 분화할 수 있는 가능성이 충분히 있는 것이 확인되었으나, 분화유도 비율면에서는 만족할 수준이 되지 못하였으며, 심근세포로의 분화는 복부 피하지방과 복강 내 지방조직에서 모두 가능한 것으로 판단되었다.

• 핵의학기술
• /
• 제12권3호
• /
• pp.208-213
• /
• 2008

목적 : 전신 뼈 검사는 핵의학 에서 가장 많이 수행하는 대표적인 검사로서 서울아산병원 핵의학과에서는 다양한 감마 카메라(Philips BRIGHTVIEW, PRECEDENCE, Siemens - ECAM, ECAM signature, ECAM Plus, SYMBIA T2, GE - INFINIA)를 사용하여 검사를 시행하고 있다. 그러나 각각의 감마카메라는 같은 검사를 수행할지라도 여러 요인에 의해서로 다른 민감도를 가지며, 이는 전신 뼈 검사의 추적검사에 있어 진단의 일관성을 저해하는 요인이 되기도 한다. 따라서 전신 뼈 검사 시 주사 후 검사시간, 수분섭취량, 신진 대사 정도 등의 통제 불가능한 인자들은 제외하고 최소한의 통제 할 수 있는 감마카메라 그 자체의 민감도 보정을 목적으로, 본 연구에서는 각각의 감마카메라의 민감도를 측정하여 전신 뼈검사를 추적 검사(follow-up)로 시행하였을 경우 보정할 수 있는 합리적인 보정계수 산출에 대한 연구를 하였다. 실험재료 및 방법 : 각 감마카메라의 민감도 측정은 IAEA에서 권고하는 면 선원 민감도 측정 방법에 따라 BRIGHT-VIEW, PRECEDENCE, ECAM, ECAM signature, ECAM Plus, SYMBIA T2, INFINIA의 감마카메라 7대를 분석하였다. 민감도 측정을 위한 $^{99m}Tc$ 면 선원은 전신 뼈 검사에 일반적인 계수율인 4~7 Kcps를 기준으로 제작하였다. 모든 감마카메라는 저 에너지 고 분해능용 평행다중구멍 조준기 (Low Energy High Resolution multi parallel Collimator)를 장착하였고, 15%의 Window Width, 140-keV photopeak로 설정하였다. $^{99m}Tc$ 면 선원을 조준기에 최대한 밀착시킨 후 60초, 120초 동안 계수를 측정하여 보정계수를 산출하였다. $^{99m}Tc$ 면 선원으로 산출한 보정계수를 실제 환자 전신 뼈 검사에 적용시킬 수 있는지 확인하기 위하여 27명의 환자를 대상으로 전신 뼈 검사를 수행하고 보정계수를 적용 후 비교 분석하였다. 결과 : $^{99m}Tc$ 면 선원을 이용하여 실험한 결과, 각 감마카메라의 민감도는 ECAM plus가 가장 높았으며 ECAM signature, SYMBIA T2, ECAM, BRIGHTVIEW, INFINIA, PRECEDENCE 감마카메라 순으로 관찰되었다. 이를 기초로 하여 상대적으로 중간 정도의 민감도를 갖는 ECAM 감마카메라를 기준으로 보정계수를 산출했을 때 각각 1.07, 1.05, 1.03, 1.00, 0.90, 0.83, 0.72로 분석되었다. $^{99m}Tc$ 면 선원의 실험을 통해 산출한 보정계수와 전신 뼈 검사로 산출된 보정계수의 차이를 분석하였을 때 통계적으로 유의한 차이가 없었다(p<0.05). 결론 : 암환자의 골 전이 진단에 있어 전신 뼈 검사는 예민도가 높고 비침습적이며 비교적 쉽게 시행할 수 있는 장점이 있어 추적검사로 널리 이용되고 있다. 그러나 추적 검사로 전신 뼈 검사를 시행할 경우 연속적으로 동일한 감마카메라만을 사용하는 것은 여건상 불가능하며, 동일한 감마카메라를 사용한다 하더라도 시간의 경과에 따른 장비의 효율에 변화를 고려하지 않을 수 없다. 따라서 서로 다른 감마카메라를 대상으로 산출된 민감도 보정계수의 임상적 적용은 정기적으로 전신 뼈 검사를 받는 환자의 진단에 일관성을 더 해 줄 수 있을 것으로 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.