• 로봇학회논문지
• /
• 제12권1호
• /
• pp.86-93
• /
• 2017

The Expanded Guide Circle (EGC) method has been originally proposed as the guidance navigation method for improving the efficiency of the remote operation using the sensory information. The previous algorithm is, however, concerned only for the omni-directional mobile robot, so it needs to suggest a suitable one for a mobile robot with non-holonomic constraints. The ego-kinematic transform is a method to map points of $R^2$ into the ego-kinematic space which implicitly represents non-holonomic constraints for admissible paths. Thus, robots with non-holonomic constraints in the ego-kinematic space can be considered as "free-flying object". In this paper, we propose an effective obstacle avoidance method for mobile robots with non-holonomic constraints by applying EGC method in the ego-kinematic space using the ego-kinematic transformation. This proposed method shows that it works better for non-holonomic mobile robots such as differential-drive robot than the original one. The simulation results show its effectiveness of performance.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.292-304
• /
• 2005

In this paper we present the linearized equations of motion for a bicycle as a benchmark. The results obtained by pencil-and-paper and two programs are compared. The bicycle model we consider here consists of four rigid bodies, viz. a rear frame, a front frame being the front fork and handlebar assembly, a rear wheel and a front wheel, which are connected by revolute joints. The contact between the knife-edge wheels and the flat level surface is modelled by holonomic constraints in the normal direction and by non-holonomic constraints in the longitudinal and lateral direction. The rider is rigidly attached to the rear frame with hands free from the handlebar. This system has three degrees of freedom, the roll, the steer, and the forward speed. For the benchmark we consider the linearized equations for small perturbations of the upright steady forward motion. The entries of the matrices of these equations form the basis for comparison. Three diffrent kinds of methods to obtain the results are compared : pencil-and-paper, the numeric multibody dynamics program SPACAR, and the symbolic software system Auto Sim. Because the results of the three methods are the same within the machine round-off error, we assume that the results are correct and can be used as a bicycle dynamics benchmark.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.587-590
• /
• 2003

In this paper, the control of the differential drive wheeled mobile robot (DDWMR) is studied. Because the DDWMR have non-holonomic constraints, it cannot be stabilized by smooth feedback. The T-S fuzzy model for the DDWMR is presented and a control algorithm Is developed by well known PID control and LMI based regional pole-placement.

• 한국지능시스템학회논문지
• /
• 제20권3호
• /
• pp.413-421
• /
• 2010

본 논문에서는 로봇 축구용 카메라를 사용하는 기존 경로계획의 제한적인 사항을 극복하기 위해서 컬러 인식법에 의한 경로계획방법을 제시한다. 제안된 연구에서는 움직이는 목표물이 스웜로봇과 멀리 있어도 로봇의 직선 시야를 기반으로 동료 로봇을 따라가며, 움직이는 목표물을 추적 할 수 있다. 제안된 포텐셜 필드는 동료 로봇과의 충돌과 장애물과의 충돌을 피하면서 스웜 로봇들이 움직이는 목표물을 향하여 이동하게 한다. 결국, 스웜 로봇들 사이의 시각적 도움에 의해 최종 목표물에 모든 스웜 로봇들이 도달하게 된다. 제안된 방법은 움직이는 파티클, 즉 점 로봇이 아닌 논홀로노믹 제한이 있는 유니 사이클 로봇들을 대상으로 자기 조직화 방법을 제시하기 때문에 실제 하드웨어 적용시 유용하다.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.664-674
• /
• 2009

This paper presents the theoretical development of a complete navigation problem of a non-holonomic mobile robot by using sonar sensors. To solve this problem, a new method to compute a fuzzy perception of the environment is presented, dealing with the uncertainties and imprecision from the sensory system and taking into account nonholonomic constraints of the robot. Fuzzy perception, fuzzy controller are applied, both in the design of each reactive behavior and solving the problem of behavior combination, to implement a fuzzy behavior-based control architecture. Different experiments in populated environments have proved to be very successful. Our method is able to guide the mobile robot named KUM-Robo safety and efficiently during long experimental time.

• 전자공학회논문지SC
• /
• 제42권5호
• /
• pp.1-12
• /
• 2005

이동로봇과 작업로봇의 직결연결 형태인 이동매니퓰레이터는 원자로 내부와 같은 위험한 작업환경에서 다양한 일한 처리하기위해 유용한 시스템이라 할 수 있다. 하부의 이동로봇은 non-holonomic 시스템이고 상부의 작업로봇의 결합으로 인하여 기구학적 잉여자유도를 갖고 있다. 그러나 주행 중 작업공간 확보로 인하여 고정식 매니퓰레이터보다 더 효율적인 작업이 가능 하다고 할 수 있다. 본 논문에서는 영상정보에 의한 물체인식 및 최적주행을 수행하기 위하여 이동로봇에 장착된 능동카메라에 인식된 영상과 실제 물체간의 기하학적 관계를 이용하여 직교좌표상의 물체의 위치를 추정할 수 있도록 하였다. 두 번째로 시스템의 위치변위 및 영상정보를 이용하여 물체위치를 추정하고 동차행렬을 이용하여 이동매니퓰레이터의 현 위치와 물체간의 최적경로를 결정하는 방법을 제시하였다. 제시한 방법을 시뮬레이션과 이동매니퓰레이터를 이용한 실험데이터분석을 통하여 유효성을 제시하였다.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.636-643
• /
• 2009

NHC means that the velocity of the vehicle in the plane perpendicular to the forward direction is almost zero. The main error source of NHC is the mounting misalignment which is the difference between the body frame of a land vehicle and the sensor frame of an inertial measurement unit. This paper suggests new NHC algorithm that can reduce position errors by real-time estimation of mounting misalignment. Then NHC/ZUPT integrated land navigation system is designed and its performances are analyzed by simulations with van test data. Simulation results show that the proposed NHC/ZUPT land navigation system improves navigation accuracy regardless of misalignment angle and is very useful when SDINS operates stand-alone for land vehicle navigation with large mounting misalignment.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.586-593
• /
• 2000

In this paper we propose a new approach to the autonomous wall-following of wheeled mobile robots using hybrid system reference motion synthesis and generation. The hybrid system approach is in-troduced to the motion control of nonholonomic mobile robots for the indoor navigation problems. In the dis-crete event system the discrete states are defined by the user-defined constraints and the reference mo-tion commands are specified in the abstracted motions. The hybrid control system applied for the non-holonomic mobile robots can combine the motion planning and autonomous navigation with obstacle avoid-ance for the indoor navigation problem. Simulation results show that hybrid system approach is an effective method for the autonomous navigation in indoor environments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2473-2475
• /
• 2001

In trajectory tracking methods, the error values of current position and velocity are compensated to follow the given reference path and velocity. The path tracking for a wheeled mobile robot is treated in this paper. It is very difficult to implement stable trajectory tracking algorithms because mobile robots have kinematically non-holonomic constraints. For solving this problem, a velocity controller is presented in this paper. This velocity controller is designed by a PID controller which could be easily employed. In this case, velocity errors caused by system uncertainties or internal and external disturbances could exist. A neural network is used for compensating the velocity errors. Input variables of this neural network compensator are defined by differences between the velocities of the posture controller and the real velocities of the mobile robot. Simulation results show the effectiveness of the proposed controller.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.32-39
• /
• 2022

Since the mobile platform and the manipulator mounted on it move at the same time in a mobile manipulator, the risk of mutual collision increases. Most of the studies on collision avoidance of mobile manipulators cannot be applied to differential drive type mobile platforms or the end-effector tends to deviate from the desired trajectory for collision avoidance. In this study, a collision avoidance algorithm based on null space projection (CANS) that solves these two problems is proposed. To this end, a modified repulsive force that overcomes the non-holonomic constraints of a mobile platform is generated by adding a virtual repulsive force in the direction of its instantaneous velocity. And by converting this repulsive force into a repulsive velocity and applying it to the null space, the end-effector of the robot avoids a collision while moving along its original trajectory. The proposed CANS algorithm showed excellent performance through self-collision avoidance tests and door opening tests.