• 한국경제지리학회지
• /
• 제8권2호
• /
• pp.247-266
• /
• 2005

이 글의 목적은 동남경제권의 부품소재생산기업의 비재무적 및 재무적지표가 주거래은행관계 형성에 미치는 영향을 살펴보는데 있다. 분석결과 지역의 소규모금융기관은 지역소기업의 금융제약을 완화해주는데 기여한다는 관계적 대출이론이나 지역금융시장이론의 가설을 뒷받침해줄만한 결과를 얻을 수 없었다. 비재무적 요인이 주거래은행관계 형성에 미치는 영향에 관한 분석에 의하면 전국기타가 거래적 금융을 지향하고 있는 가운데 국민은행과 기업은행이 지역영세기업의 주거래은행으로서 중요한 기능을 수행하고 있다. 그리고 재무적 요인이 주거래은행관계 형성에 미치는 영향에 관한 분석에서도 수익성과 안정성의 측면에서 비은행 금융기관과 국민은행의 주거래기업이 다른 은행의 그것에 비해 높고 안정적이다. 전체적으로 볼 때 지방은행의 지역밀착도는 강하지 않다. 즉 그것은 다른 은행과의 경쟁에 많이 노출되어 있으며 영업기반은 그리 확고하지 못한 것으로 보인다.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.625-634
• /
• 2018

In this work, we describe a novel and simple technique to produce non-hydrate surfactant complexes for the formation of highly crystalline fatty acid modified SPIONs by thermolysis of iron oleate (FeOl) complexes in a non-coordinating solvent. FeOl complexes were prepared by direct coordination of iron ions and carboxylic acid; thus, we could control the stoichiometric composition of the precursor by changing the molar ratio of fatty acid and metal ions. The discrete thermal behaviors and chemical coordination of the intermediate non-hydrated FeOl were studied by thermo-analytic techniques including differential scanning calorimetry, thermal gravimetric analysis, and Fourier transform infrared spectroscopy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.73-73
• /
• 2008

In this work, the study on the $SiO_2$ film non-uniformity by PECVD (Plasma Enhanced Chemical Vapor Deposition) was performed. Plasma diagnostics was analyzed by a DLP(Double Langmuir Probe) and a probe-type QMS(Quadrupole Mass Spectrometer) in order to investigate the spatial distribution of the plasma species in the chamber. The relationship between the plasma species and the depositing rate of the films was examined. On the basis of this work, it was confirmed that O radical density mainly contributed to the increase in the depositing rate of the $SiO_2$ films and the electron temperature in the plasma had a main effect on the formation of the oxygen radicals.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.27-32
• /
• 2003

The effect of non-thermal plasma on diffusion flames in co-flow jets has been studied experimentally by adopting a dielectric barrier discharge technique. The generation of streamers was enhanced with a flame due to increased reduced electric fields by high temperature burnt gas and the abundance of ions in the flame region. The effect of streamers on flame behavior reveals that the flame length was significantly decreased as the applied voltage increased and the yellow luminosity by the radiation of soot particles was also significantly reduced. The formation of PAH and soot was influenced appreciably by the non-thermal plasma, while the flame temperature and the concentration of major species were not influence much with the plasma generation. The results demonstrated that the application of non-thermal plasma can be a viable technique in controlling soot generation in flames with low power consumption in the order of 1 W.

• 한국의류학회지
• /
• 제33권9호
• /
• pp.1398-1408
• /
• 2009

This study focuses on how positive emotions form when consumers impulsively purchase fashion products. Examined are the novelty seeking situations and the fashion knowledge of consumers as influential factors that affect positive impulsive shopping emotions along with the mediating role of the perceived risk of consumers for purchase and non-purchase. An online survey was conducted for the empirical research with a questionnaire about the fashion impulsive purchases of a product within the last 2 months. A total of 555 surveys were collected from impulsive female buyers and 404 complete responses were analyzed. The results find that the perceived risk is identified into purchase and non-purchase perspectives. Purchase perceived risk influenced negatively on positive emotions of impulsive purchase and non-purchase perceived risk positively. The perceived risk for non-purchase versus purchase increased by the more fashion knowledge consumers had and the more they shopped as novelty seeking. The results imply that non-purchase perceived risk importantly mediated between the influential factors and positive affect for impulsive purchase. Based on the findings, this study proposed some marketing suggestions and thoughts about effective purchase stimulation.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.199-208
• /
• 2022

The steel wire or steel bar processing process applied to the manufacture of various bolts and power transmission shafts was improved by applying in-line phosphate film treatment technology. By applying a polymer lubricant for a non-reactive metal forming process and a non-reactive non-phosphorus lubricating coating agent, the film formation for each process time was comparatively analyzed and reviewed. Compared to the nine processes applied previously, the in-line phosphate film treatment technology applied with only two processes has been effectively improved in terms of reduction of treatment time, reduction of facility installation area, prevention of water pollution due to wastewater, and non-use of ozone-depleting substances. In addition, it was found that it can have an important effect on productivity improvement and price competitiveness from the simplification of quality control and process control as well as improvement of the working environment.

• Composites Research
• /
• 제29권5호
• /
• pp.236-242
• /
• 2016

본 연구에서는 유리섬유/폴리프로필렌 기반의 열가소성 복합재의 열성형 시험 평가를 위해, 성형온도에서의 인장 및 면내 전단 물성 시험을 실시하였고, 이를 비직교 구성방정식을 이용하여 정량화 하였다. 이를 통해 실험값과 잘 일치하는 고온에서의 인장 및 전단 물성값을 수식화하여 얻을 수 있었다. 열성형 시험을 위해 반구돔 시험을 실시하였고, 이형제 사용 유무 및 홀더의 무게를 달리해가며 성형품의 최종형상을 비교하였다. 그 결과 이형제를 사용하면 성형품의 대칭성이 확보되고 주름 개선 효과에 유리하다는 것을 확인하였고, 적당한 힘의 홀딩력 제어가 필수적이라는 것을 알 수 있었다. 더 나아가 비직교 구성방정식이 고려된 열성형 수치해석을 실시하여 실험 결과와 유사한 양상을 확인할 수 있었고, 홀딩력이 낮을 수록 주름이 많아지고, 마찰력이 클수록 더 많은 펀치력을 필요로 함을 확인하였다.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.727-732
• /
• 2005

The treatment of wounds of the lower extremity caused by diabetes or vascular dysfunction remains a difficult problem for the plastic surgeon. The use of negative pressure in wound healing is a relatively new method to facilitate chronic wound healing by secondary healing. The use of vacuum-assisted closure(VAC) system is purposed to reduce local edema, increase regional blood flow, enhance epithelial migration, preserve a moist wound environment, reduce bacterial colonization, promote granulation tissue formation, and mechanically enhance wound closure. The VAC also can be used as a dressing for anchoring an applied split thickness skin graft. We reviewed the data from 20 consecutive patients with non-healing wound in lower extremity at Dong-A University from March 2002 to December 2004. We used the VAC in 20 patients and compared the results with the control group. In the VAC using group, mean application duration was about 3 weeks and dressing change was done every other day. The follow-up period of patients ranged from 3 months to 30 months with a mean of 17 months. The points of comparison with control group are wound size, granulation tissue proliferation rate, operation method, preoperative time, postoperative healing time, complication, and cost. With those points, we propose to approve the efficiency of the VAC in non-healing wound. As a result, the VAC used in non-healing wound decrease wound size, accelerate granulation tissue formation, do a wound closure with less invasive operation method, make less postoperative complication, can make operation time shorter. Therefore it is cost effect. Our results demonstrate the usefulness of VAC as an adjunct in management of chronic wounds with other extrinsic factors.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.19-43
• /
• 1997

The barrier membranes for GTR procedure could be affected bY bacterial contamination after exposure to oral environment. This study was done to evaluate whether the tetracycline impregnated barrier membranes could inhibit bacterial attachment and penetration into membranes. The resorbable membrane(polylactic and polyglycolide copolymer, $Resolute^{(R)}$, W.L Gore and Associates, Inc..USA) and the non-resorbable membrane(e-PTFE; Gore-TexTM, W.L. Gore & Associates, Inc.,USA) were cut into 4mm discs and trated with 5% tridodecylmethylammonium chloride solution in ethanol and dried in air. The membranes were immersed in tetracycline(TC) solution (100mg/ml, pH 8.0) and dried. To the maxillary canine-premolar region in six periodontally healthy volunteers, removable acrylic devices were inserted, on which 8 cylindrical chambers were glued with TC impregnated and non-impregnated discs, the membrane discs were examined for bacterial attachment and penetration, and structural changes under SEM and LM. From the 1st day to the 7th day, membranes showed bacterial plaque formation composed of cocci and rods. Thereafter, filamentous bacteria appeared and the plaque thickness increased. The TC impregnated e-PTFE membranes showed less bacterial attachment and delayed in bacterial plaque maturation than non-treated membranes. As for bacterial penetration, the TC impregnated e-PTFE membranes showed superficial invasion and infrequent presence of bacteria in unexposed inner surface at the 4th week. while the non-treated e-PTFE membranes showed deep bacterial invasion at the 2nd week and frequent presence of internal bacteria at the 4th week. The resorbable membranes started to be resorbed at the 2nd week and were perforated at the 4th week, regardless of TC treatment. In conclusion, bacterial plaque formation and penetration was efficiently delayed in TC impregnated e-PTFE membranes, whereas resorbable membranes were similar in bacterial invasion due to membrane degradation and perforation, regardless of TC treatment.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.125-138
• /
• 1986

It is considered that etching solution or material itself of phosphoric ester cement will induce not a little pulpal irritation, if applied directly onto unsealed dentinal tubules. This study was designed to confirm above consideration by comparing two different conditions between $Ca(OH)_2$-based and non-$Ca(OH)_2$-based group. Posterior teeth of 15 male dogs were selected for this experiment. One experimental group was filled with cement after $Ca(OH)_2$-basing and enamel-etching, the other experimental group after enamel etching without $Ca(OH)_2$-basing. And both of two experimental groups were observed at 2 hours, 15 hours, 3 days, 1 week, 2 weeks, 4 weeks, and 6 weeks after filling. The findings reached to the following conclusions histologically. 1. In both groups, the damaged odontoblasts were atrophied and eventually disappeared. 2. In non-based group at early stage, odontoblasts were severely atrophied and defective areas were appeared between odontoblast cell layers. However, in based group, the odontoblasts were arranged slight irregularly. 3. In non-based group, a small number of undifferentiated cells below the odontoblast cell layers started to appear at 1 week after filling. However, in based group, the undifferentiated cells were appeared at 15 hours after filling. 4. In non-based group, formation of reparative dentin was not begun until late stage of experiment. However, in based group, formation of reparative dentin matrix was begun at 2 weeks after filling and very thickened reparative dentin was formed at 6 weeks after filling. 5. In odontoblast cell layers of both groups, dilated capillaries were observed. 6. Argyrophilic fibers were reticularly condensed in zone of Weil, and they were connected to the pulp tissue and dentin.