• 한국공간구조학회논문집
• /
• 제8권6호
• /
• pp.75-83
• /
• 2008

철근 콘크리트 구조물에서 발생하는 균열에 의한 손상은 과도한 하중이나 사용성에 의해 발생한다. 이러한 손상을 검사하는 방법으로 육안으로 확인하거나 비파괴 시험법을 주로 이용하고 있다. 후자의 경우, 콘크리트 내부 철근의 배근 방향성에 의해 균열에 의한 손상인지 판별하기 어려운 문제가 발생하게 되며, 비파괴시험(Non-destructive Test)에 사용되는 대부분의 센서(Sensor)는 1축 가속도 센서이기 때문에 중첩된 전달파를 분석하기에는 어렵다. 따라서, 이를 해결하기 위해 중공 유리관을 이용하였고 콘크리트 보 내부에 매입하여 철근이 매입되어 있는 경우에 대하여 3축 가속도계를 이용하여 탄성파로 가진 하였을 경우에 발생하는 파(Wave)를 비교 분석하였다.

• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.1-7
• /
• 2002

구조물 안전진단 등의 분야에서 콘크리트 압축강도의 추정을 위한 비파괴시험법이 많이 도입되어 사용되고 있으며, 압축강도를 추정하기 위한 방법으로는 코어를 채취하지 않고 기존의 압축강도 추정식을 이용하는 방법이 많이 사용되고 있으나 이 경우 이용되는 압축강도 추정식은 외국에서 이미 제안된 식이 그대로 사용하고 있다. 그러나, 이러한 압축강도 추정식의 적용은 동일 한 비파괴 시험값에 대하여 추정 압축강도가 각각 다르게 나타날 수 있다. 왜냐하면 외국의 사용재료나 기후 등이 우리나라와 다르기 때문이다. 따라서, 본 연구에서는 국내실정에 적합한 전국적인 추정식 제안을 목적으로 진행된 종합적인 연구 중 특히, 전라권에 많이 분포되어 있는 안산암을 대상으로 하여 일반강도 범위에서 콘크리트 압축강도에 현저한 영향을 주는 배합사항, 양생조건 및 재령에 따른 반발도법, 초음파 전파속도법 및 복합법에 의한 압축강도 추정식을 비교 분석함으로써 국내의 콘크리트 압축강도 비파괴시험의 추정식을 제안하고자 하였다. 실험결과에 따라 국내의 안산암 골재를 사용한 비파괴 시험에 의한 압축강도 추정식을 제안하면 다음과 같다. 1)반발 강도법 (equation omitted) $_Sf_c=12.3_SR_o-94.66$ <표준양생＞ $_Af_c=15.5_AR_o-241.5$ <기중양생> 2)초음파 속도법 $_Sf_c=359.1_SV_p-1226.7$ <표준양생> $_Af_c=369.4_AV_p-l237.8$ ＜기중양생>

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.668-674
• /
• 2002

Structural integrity assessment is indispensable for preventing catastrophic failure of industrial structures/components/facilities. This diagnosis of operating components should be done periodically for safe maintenance and economical repair. However, conventional standard methods for mechanical properties have the problems of bulky specimen, destructive and complex procedure of specimen sampling. Especially, the mechanical properties at welded zone including weldment and heat affected zone could not be evaluated individually due to their size requirement problem. So, an advanced indentation technique has been developed as a potential method for non-destructive testing of in-field structures. This technique measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation such as yield strength, tensile strength and work-hardening index. Also indentation technique can evaluate a residual stress based on the concept that indentation load-depth curves were shifted with the direction and the magnitude of residual stress applied to materials. In this study, we characterized the tensile properties and welding residual stress of various industrial facilities through the new techniques, and the results are introduced and discussed.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.473-484
• /
• 2015

In this study, the availability of Schmidt hammer has been investigated as a reliable method to determine the quality of concrete in irrigation networks. For this purpose, the 28-day compressive strength of concrete material used in the construction irrigation channel of Bafra lowland, which is one of the most fertile plains in Turkey was examined by means of concrete compression and as well as concrete Schmidt hammer in laboratory conditions. This study was carried out on cylindrical samples to represent the everyday concrete party ($150m^3$) produced by contractor firm as 3 replications. The statistical analysis of experimental data showed that the correlations between the values of 28-day compressive strength of Schmidt hammer and the rebound number was found to be 0.98. Differences of the compressive strength between compression testing and Schmidt hammer were statistically significant at P<0.01. In this context, it was found that the reliability of compressive strength of the concrete compression test are excellent, also the reliability of compressive strength of Schmidt hammer are fair in assessing the quality of concrete irrigation channels.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.266-271
• /
• 2003

Safety diagnosis of various structural components and facilities is indispensable for preventing catastrophic failure of material by time-dependent and environment accelerating degradation. Also, this diagnosis of operating components should be done periodically for safe maintenance and economical repair. However, conventional standard methods for mechanical properties have the problems of bulky specimen, destructive procedure and complex procedure of specimen sampling. So, a non-destructive and simple mechanical testing method using small specimen is needed. Therefore, an advanced indentation technique was developed as a potential method for non-destructive testing of in-field structures. This technique measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation such as yield strength, tensile strength and work-hardening index. In this paper, we characterized the tensile properties including yield and tensile strengths of the V-modified Cr-Mo steels in petro-chemical and thermo-electrical plants. And also, the effects of hydrogen-assisted degradation of the V-modified Cr-Mo steels were analyzed in terms of work-hardening index and yield ratio.

• Structural Engineering and Mechanics
• /
• 제6권3호
• /
• pp.259-274
• /
• 1998

The test results from non-destructive and destructive field testing of a three-span deteriorated reinforced concrete slab bridge are used as a vehicle to examine the reliability of available tools for finite-element analysis of in-situ structures. Issues related to geometric modeling of members and connections, material models, and failure criteria are discussed. The results indicate that current material models and failure criteria are adequate, although lack of inelastic out-of-plane shear response in most nonlinear shell elements is a major shortcoming that needs to be resolved. With proper geometric modeling, it is possible to adequately correlate the measured global, regional, and local responses at all limit states. However, modeling of less understood mechanisms, such as slab-abutment connections, may need to be finalized through a system identification technique. In absence of the experimental data necessary for this purpose, upper and lower bounds of only global responses can be computed reliably. The studies reaffirm that success of finite-element models has to be assessed collectively with reference to all responses and not just a few global measurements.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.11-18
• /
• 2014

PURPOSES : This study aims to develop a strength test method for irregularly shaped concrete block paver. METHODS : Ten (10) different types of concrete block pavers including porous and dense blocks were tested for strength capacities. Destructive and non-destructive methods were used to develop a strength test method for irregularly shaped concrete block paver. The flexural strength evaluation was conducted in accordance to KS F 4419, while compressive strength was conducted with a 45.7mm-diameter core specimen. The impact echo test method was used to evaluate the elastic modulus. Finally, regression analysis was used to investigate the relationship between flexural strength, compressive strength and elastic modulus based on their corresponding test results. RESULTS : The flexural strength of the tested block pavers ranged from 4MPa to 10MPa. At 95% confidence level, the coefficients of determination between compressive-flexural strength relationship and compressive strength-elastic modulus relationship were 0.94 and 0.84, respectively. These coefficients signified high correlation. CONCLUSIONS : Using the test method proposed in this study, it will be easier to evaluate the strength of irregularly shaped concrete block pavers through impact echo test and compressive test, instead of the flexural test. Relative to the flexural strength requirement of 5MPa, the minimum values of compressive strength and elastic modulus, as proposed, are 13.0MPa and 25.0GPa, respectively.

• 산업기술연구
• /
• 제25권B호
• /
• pp.115-120
• /
• 2005

Impact seismic wave method is a method for non-destructive testing of concrete structure using of stress wave which is propagate and reflected from internal flaws within concrete structure and external surface. In this study, we performed frequency domain method using impact seismic wave test for safety diagnosis of civil engineering structure. And reflection method which is used for one-dimensional target such as tunnel lining and transmission method are compared with each other.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.713-716
• /
• 1999

The presence of voids under pavements or behind tunnel linings results in the deterioration. One method of detecting such voids by non-destructive means is radar. This research is devoted to quantitatively evaluating the efficiency of such non-destructive tests with radar. As a foundation to this ongoing research, which aims to estimate the thickness of voids using radar, an analysis method based on radar signal processing using convolution technique is carried out with various void thicknesses in embedded layer which has different electromagnetic properties. The computed results were verified by comparing the test results. As a result, a proposed method in this study has a possibilty of estimating the thickness of voids with good accuracy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.48-51
• /
• 2004

This paper is to study the response of flat plate slab-column connections consisting of various types of shear reinforcement and steel plate subjected to gravity loadings, mainly punching shear forces using the non-destructive testing, spectral analysis of surface waves and structural experiments. The base specimen failed due to punching shear generated from the gravity. The three other types of slab shear reinforcement and steel plate showed effective in resisting punching shear for these types of connections under gravity loading. This study has focused in evaluating the velocity response of a Surface wave during the early age as the poured concrete specimens have been hardened, the possibility of damage detection in the slab-column connection and the relationship between the punching shear forces and the surface wave velocities under the condition that the punching shear forces had gradually increased until the flat plate slab in slab-column connection had been failed.