• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.44-49
• /
• 2008

This paper describes the problem of ultraprecision positioning with a ball screw mechanism in the microdynamic range, along with its solution. We compared the characteristics of two ball screw mechanisms with different table masses. The experimental results showed that the vibration resulting from the low stiffness of the ball screw degraded the positioning performance in the microdynamic range for the heavyweight mechanism. The proposed nominal characteristic trajectory following (NCTF) controller was designed for ultra precision positioning of the ball screw mechanism. The basic NCTF control system achieved ultra precision positioning performance with the lightweight mechanism, but not with the heavyweight mechanism. A conditional notch filter was added to the NCTF controller to overcome this problem. Despite the differences in payload and friction, both mechanisms then showed similar positioning performance, demonstrating the high robustness and effectiveness of the improved NCTF controller with the conditional notch filter. The experimental results demonstrated that the improved NCTF control system with the conditional notch filter achieved ultra precision positioning with a positioning accuracy of better than 10 nm, independent of the reference step input height.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1052-1057
• /
• 1993

A scara type Direct Drive Arm(DDA) with two degrees-of-freedom is designed and implemented. The direct drive motor is used to furnish large torque to reduce the modeling error by the gear and chains. To control the DDA, a multiprocessor control structure with multirate dynamic control algorithm is designed. In the control algorithm, the dynamics of system is used to calculate the nominal control torque and the feedback controls are calculated with a parallel processing algorithm for each joint. The laboratory experiments on Hong-Ik DDA by dynamic control algorithm are presented and compared to that of PID control algorithm. This result shows that the proposed controller guarantees small trajectory error and stability. With this research, Hong-Ik DDA is expected to be utilized as A basic tool for robotics and control engineering.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.105-114
• /
• 2000

An output feedback control (OFC) is presented for a linear stochastic system with known disturbance and applied to a flexible spacecraft for the reduction of residual vibration while allowing the natural deflection during operation. By converting the tracking problem into regulator problem, the OFC minimizes the expected value of a guadratic objective function composing of error stats which always remain on the intersection of sliding hypersurfaces. For the numerical evaluation with a flexible spacecraft, a large slewing maneuver strategy is devised with a tracking model for nominal trajectory and start-cost-stop strategy for economical maneuver in conjunction with the input shaping technique. The performance and efficacy of the proposed control scheme are illustrated with the comparison of different maneuver strategies.

• 한국산업정보학회논문지
• /
• 제12권4호
• /
• pp.126-130
• /
• 2007

연속 반복되는 시스템에서 제어하는 제어기 repetitive controller를 설계하는 방법과 시스템 안정성을 소개하고자 한다. 제어기는 반복함수로서 수렴을 조장하는 비용함수를 주파수영역에서 최소화함으로써 유도할 수 있다. 모의실험은 제안된 단수모형설계 기법을 이용한 RC를 어떻게 유도하는 것을 보여 주고 있다.

• 전자공학회논문지B
• /
• 제29B권3호
• /
• pp.25-34
• /
• 1992

This paper proposes a Self-Tuning control algorithm for tracking the reference trajectory by measuring the end-point of robot manipulator whose links are light and flexible, and the performance of it is tested through the computer simulation. As an object of system, a flexible robot manipulator with two-links is considered and an assumed mode shape method including gravity force is adopted to analyze the vibration modes for each links and dynamics equation is derived. The controller is designed as a combined form which consists of dynamic feedforward compensator and self-tuning feedback controller. The one supplies nominal torque and the other supplies variational torque to manipulator. Apart from the, K-incremental predictor is also proposed in order to eliminate the offset error. and it shows that the result of simulation adapted well to load change and rapid velocity.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1694-1704
• /
• 2015

본 논문에서는 병렬 분산 보상 (PDC) 제어와 적분 슬라이딩 모드 제어 (ISMC)를 결합하여 바퀴형 이동 로봇의 강인한 궤도 추적 제어 방법을 새롭게 제안한다. PDC 제어 방법은 다른 비선형 제어 방법에 비해 비교적 간단하고 사용이 편리하다. 그리고 ISMC는 상태 변수들을 원하는 공칭 동특성을 갖는 슬라이딩 평면에 배치함으로써 초기 순간부터 모델 불확실성 및 외란에 대해 강인하고 안정적인 제어 특성을 갖게 할 수 있다. 그러므로 제안된 PDC+ISMC 궤도 추적 제어 방법은 외란에도 불구하고 강인한 궤도 추적 제어 성능을 보여준다. 제안된 궤도 추적 방법에 대해 시뮬레이션을 통하여 외란이 있는 경우의 궤도 추적 성능을 확인하였다. 제안된 방법은 외란이 증가하더라도 외란이 없을 때의 PDC 제어 방법에 의한 궤도 추적 성능을 유지하였다. 그러나 PDC 궤도 추적 방법은 외란의 크기가 증가하면 제안된 방법과는 달리 궤도 추적 오차가 크게 증가함을 알 수 있었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.62-66
• /
• 2006

The learning control develops controllers that learn to improve their performance at executing a given task, based on experience performing this specific task. In a previous work, the authors presented an iterative precision of linear decentralized learning control based on p-integrated learning method for the vertical dynamic multiple systems. This paper develops an indirect decentralized learning control based on adaptive control method. The original motivation of the learning control field was learning in robots doing repetitive tasks such as an assembly line works. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. Some techniques will show up in the numerical simulation for vertical dynamic robot. The methods of learning system are shown for the iterative precision of each link.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.92-98
• /
• 2005

The learning control develops controllers that learn to improve their performance at executing a given task, based on experience performing this specific task. In a previous work, the authors presented an iterative precision of linear decentralized learning control based on p-integrated learning method for the vertical dynamic multiple systems. This paper develops an indirect decentralized teaming control based on adaptive control method. The original motivation of the teaming control field was loaming in robots doing repetitive tasks such as on an assembly line. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. Some techniques will show up in the numerical simulation for vertical dynamic robot. The methods of learning system are shown up for the iterative precision of each link.

• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 1996년도 추계학술발표회 발표논문집
• /
• pp.217-227
• /
• 1996

The new field of learning control develops controllers that learn to improve their performance at executing a given task, based on experience performin this specific task. In a previous work［6］, the authors presented a theory of indirect learning control based on use of indirect adaptive control concepts employing simultaneous identification ad control. This paper develops improved indirect learning control algorithms, and studies the use of such controllers in decentralized systems. The original motivation of the learning control field was learning in robots doing repetitive tasks such as on an assembly line. This paper starts with decentralized discrete time systems, and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. The basic result of the paper is to show that stability of the indirect learning controllers for all subsystems when the coupling between subsystems is turned off, assures convergence to zero tracking error of the decentralized indirect learning control of the coupled system, provided that the sample time in the digital learning controller is sufficiently short.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1996년도 추계 학술 발표회 발표논문집
• /
• pp.217-227
• /
• 1996

The new filed of learning control develops controllers that learn to improve their performance at executing a given task , based on experience performing this specific task. In a previous work[6], authors presented a theory of indirect learning control based on use of indirect adaptive control concepts employing simultaneous identification and control. This paper develops improved indirect learning control algorithms, and studies the use of such controller indecentralized systems. The original motivation of the learning control field was learning in robots doing repetitive tasks such as on an asssembly line. This paper starts with decentralized discrete time systems. and progresses to the robot application, modeling the robot as a time varying linear system in the neighborhood of the nominal trajectory, and using the usual robot controllers that are decentralized, treating each link as if it is independent of any coupling with other links. The resultof the paper is to show that stability of the indirect learning controllers for all subsystems when the coupling between subsystems is turned off, assures convergence to zero tracking error of the decentralized indirect learning control of the coupled system, provided that the sample tie in the digital learning controller is sufficiently short.